Это видео недоступно.
Сожалеем об этом.
How to Replace Audi A6 C6 LED Brake Light
HTML-код
- Опубликовано: 7 июн 2019
- #AudiA6 #AudiA6C6 #AudiBrakeLight
How to Replace Audi A6 C6 LED Brake Light
If you find this video helpful you could buy me a coffee from anywhere in the world:
ko-fi.com/coffeetips
Cheers!
Used in this video:
Audi A6 C6 LED Brake Light on eBay:
ebay.to/2QUSXc6
WD-40 Contact Cleaner 400ml
amzn.to/2MzpCp2
Please leave a comment, feedback is appreciated.
Please hit the like button and don't forget to subscribe!
Thank you for watching!
![[BLACKSWAN] ‘Roll Up’ Official Music Video](http://i.ytimg.com/vi/ulvCwyKrwqw/mqdefault.jpg)
Thanks for the video!
How du you fix the tailgate Warning that its Open? My 3 brake light is broken, does the tailgate warning come of when the 3 brake light is fixed?
Thanks for the help
As always - Fantastic!
Thanks for watching!
Thanks for this - I think you saved me a weekend 👍😀
You're welcome! I couldn't find any videos explaining the process in detail so I thought I'd make one. Wasn't hard at all!
Hi can I can't find link to buy a light
very helpful direction to replace this light.
Glad I could help! Appreciate your comment!
👌🏻🤙🏻
I cannot get the LED out, is there more clips to it fore loosening? The video did not show that. I cannot push it out like you did?
I think there is one or two clips. But you have to slide it sideways the top part of the clip to free it.
Thank you. Very helpful. Can you repair the old lamp?
Bill, you're welcome!
I didn't try to repair the old one. With the right set of skills and tools it might be possible. The pins were really corroded and I guess you would need a soldering gun to resolder the pins to the circuit board as they were loose. Also the foam gasket that surrounds the LED brake lamp was in a really bad shape, so water could get to the circuit board quite easily, hence the defect.
Hi I have a problem with my break lights all 3 of them stay on when I turn the car on and when I'm driving.. I went to the audi dealership to fix it and they couldn't..what should I do bc I love the car.. it's a (A6 2008 quattro)
Hello, thanks for uploading. I have access but the light is stuck in. How did you free it so that it popped out?
Mine was stuck as well. I lifted slightly the left corner and pulled sideways towards my left hand side. And it came out easily. Did I skip that part?
Oh, and first you have to release the safety clips from inside with a screwdriver see around 02:06.
Mine is stuck as well, all retaining clips removed but unable to pop the lamp out - almost seems like glass is millimeter or two too high.
Just slide it slightly to one side and then lift up.
when i was replacing brake light i push so hard i broke it in half damn it
Why don't you show how to remove metal clips
If you stop the video at 01:49 you will see the grey plastic bit at the top with the metal clip and the black plastic bit at the bottom with a rectangular notch. You place the screwdriver in that notch and you can see in the video I tap it towards the right and it will slide just a few millimeters. That's enough to release the metal clips and then you can gently remove the led cluster from the outside. I will try to make a separate video about this in the future.
I do not see where did you put the screwdriver to nock or push the light
Sorry for that I was concentrating to find the gap and I had the screwdriver in my right hand and I didn't get the perfect shot. But if you look closely there is the black plastic under the metal retaining clip and that is the sweetspot. Just push it slightly down and towards right and it will move the entire clip and free up the light cluster slightly but not entirely.
If you stop the video at 01:49 you will see the grey plastic bit at the top with the metal clip and the black plastic bit at the bottom with a rectangular notch. You place the screwdriver in that notch and you can see in the video I tap it towards the right and it will slide just a few millimeters. That's enough to release the metal clips and then you can gently remove the led cluster from the outside. I will try to make a separate video about this in the future.
Where did he put the screw driver the hit didnt show where thanks
In which part of the video? If you can pinpoint the minute and second I can help ;)
what you have to do, pull the black piece to the left or right
Point me to the minute and second and I can reply and help you out.
and then remove 3 metal clamps and remove stop
Down and right.