high pressure and low pressure piston travel sides are flipped wrong. You have them tagged as the opposite of what the piston travel is showing them to actually be doing... :)
No, the piston pressing movement creates pressure, and the piston withdrawing movement creates suction. You've got the names in the animation flipped, sir.
Red zones - this is inlet port. The oil "push" the pistons and to overcome the resistant pressure is created. Pressure created forces which move cylindrical block . Blue zone is outlet port, from there oil leave the motor. There is no suction in this case - this is motor.
Great, but YOUR VIDEO SAYS THE OPPOSITE IN THE TEXT. It says: "Red is high pressure, blue is low pressure". An inlet is not high pressure, and it's colored RED. Jesus, man. Look at your own video.
you all prolly dont care but does someone know a trick to get back into an instagram account?? I was dumb lost my account password. I appreciate any assistance you can give me.
@Gordon Kaison thanks for your reply. I found the site thru google and Im trying it out now. Takes quite some time so I will get back to you later when my account password hopefully is recovered.
The initial point of Ft should be placed on piston. But for better repesation i placed it as it now. The direction as vector and it's maginitude are correct.
GOOD AFTERNOON CONSULTATION, WHY DO THE AXIAL OR RADIAL PISTON PUMPS CARRY ARE ODD OF 7, 9, 11 WHAT IS THE FUNCTION OF BRINGING ODD NUMBERS, WHAT WOULD HAPPEN IF THEY WERE EVEN PISTONS?
@@MVM630 It doesn't matter whether it is a pump or motor. The low pressure side creates suction and the high pressure side discharges. The animation is mislabeled.
@@HarryPost-h7m This is motor not pump. Here you have high pressure side- hydraulic oil enter to the motor from inlet port (it is coming from pump), and after that oil is discharged via outlet port. If there not pump to delivery oil the motor will try to work as pump.... and then the pressure zones should be changed. But them the motor should be rotated from external rotation. But if motor work in that condition..... it is another story....
@@MVM630 You are missing my point because you don't care about my point. It doesn't matter if it is acting as a pump or a motor. The low pressure side is the low pressure side and the high pressure side is the high pressure side. They are mislabeled here.
Траекторията на движение и е елипсовидна, но отворите в нея за буталата са изчислявани да с по-голям размер от самите бутала и да позволяват елипсовидната траектория. Но от друга страна се търси да са с минимален диаметър за да се се увеличи контактната площ между опорите на буталата и плочата. Което е характерно за тази конструкция е че дори има по-голяма свобода на движение на плоча притискаща сравнение с другите конструкции с притискане със сфера.
tu animación tiene un error en cuanto a los colores de succión y presión el color azul es para baja presión que en este caso es succión y el rojo para presión y es cuando comprime , tu explicación de los colores es correcta pero en la animación están volteados se indica rojo para succión y azul para presión cuando debería de ser al contrario y coincidir con las indicaciones al lado izquierdo de la animación saludos
Excellent tutorial! I have finally gained an understanding as to how these motors work. Thank you!
www.adityasharmaacademy.com/2020/08/function-of-swash-plate-swash-plate.html
Really helpful and great work in animation
It is vary clearly explanation. Thanks you.
thank u so much for sharing such an educational video, really helps me a lot.
Wondering if we could use this animation in our Kubota Tractor training. We have similar in many of our products.
Yes. You can use it.
Thanks, i used mainly SolidWorks for animation and Adobe Premiere and VirtualDub for the rest.
www.adityasharmaacademy.com/2020/08/function-of-swash-plate-swash-plate.html
high pressure and low pressure piston travel sides are flipped wrong. You have them tagged as the opposite of what the piston travel is showing them to actually be doing... :)
Check the forces created by pressure. Maybe you are confusing with pump.
No, the piston pressing movement creates pressure, and the piston withdrawing movement creates suction. You've got the names in the animation flipped, sir.
Red zones - this is inlet port. The oil "push" the pistons and to overcome the resistant pressure is created. Pressure created forces which move cylindrical block . Blue zone is outlet port, from there oil leave the motor. There is no suction in this case - this is motor.
Great, but YOUR VIDEO SAYS THE OPPOSITE IN THE TEXT. It says:
"Red is high pressure, blue is low pressure".
An inlet is not high pressure, and it's colored RED. Jesus, man. Look at your own video.
You apparently just don't understand the very thing you WORKED on, but only rigged an object to move around per specifications.
Great animation!
Thank you very much for the excellent animation and explanation of function!
www.adityasharmaacademy.com/2020/08/function-of-swash-plate-swash-plate.html
you all prolly dont care but does someone know a trick to get back into an instagram account??
I was dumb lost my account password. I appreciate any assistance you can give me.
@Wilson Onyx instablaster ;)
@Gordon Kaison thanks for your reply. I found the site thru google and Im trying it out now.
Takes quite some time so I will get back to you later when my account password hopefully is recovered.
@Gordon Kaison It did the trick and I now got access to my account again. Im so happy!
Thanks so much you saved my ass !
Excellent animation...
The initial point of Ft should be placed on piston. But for better repesation i placed it as it now. The direction as vector and it's maginitude are correct.
www.adityasharmaacademy.com/2020/08/function-of-swash-plate-swash-plate.html
GOOD AFTERNOON CONSULTATION, WHY DO THE AXIAL OR RADIAL PISTON PUMPS CARRY ARE ODD OF 7, 9, 11 WHAT IS THE FUNCTION OF BRINGING ODD NUMBERS, WHAT WOULD HAPPEN IF THEY WERE EVEN PISTONS?
www.adityasharmaacademy.com/2020/08/function-of-swash-plate-swash-plate.html
It will work but more pulsation and noise will be produce
Excellent explanation indeed...
www.adityasharmaacademy.com/2020/08/function-of-swash-plate-swash-plate.html
Good video.... helpfull for learning travel motor komatsu hmv110ADT-3
soy apasionado al sistema hidraulico. me gustaría tener el máximo conocimientos como ustedes
Great animation. What all software do you use to make such animations?
www.adityasharmaacademy.com/2020/08/function-of-swash-plate-swash-plate.html
The components are wrong represented, there is a Ft in the same direction of the swash plate so the Fa has a correct direction but wrong magnitud.
Давлениесын калай азайтуға болады?
Good animation
No sound ???
good and easy to understand
High/Low pressure zones are wrong....
This is motor.
@@MVM630 It doesn't matter whether it is a pump or motor. The low pressure side creates suction and the high pressure side discharges. The animation is mislabeled.
@@HarryPost-h7m This is motor not pump. Here you have high pressure side- hydraulic oil enter to the motor from inlet port (it is coming from pump), and after that oil is discharged via outlet port.
If there not pump to delivery oil the motor will try to work as pump.... and then the pressure zones should be changed. But them the motor should be rotated from external rotation. But if motor work in that condition..... it is another story....
@@MVM630 You are missing my point because you don't care about my point. It doesn't matter if it is acting as a pump or a motor. The low pressure side is the low pressure side and the high pressure side is the high pressure side. They are mislabeled here.
@@HarryPost-h7m Is it matter is it pump or motor.
Very good.
www.adityasharmaacademy.com/2020/08/function-of-swash-plate-swash-plate.html
Good 👍👍👍👍👍👍
Thank you
Yavore tazi retainer plate ne trqbva li da e elipsovidna be?
Ne moga da si obqsnq kak se vyrti i v elipsa i v krug ednovremenno.
Траекторията на движение и е елипсовидна, но отворите в нея за буталата са изчислявани да с по-голям размер от самите бутала и да позволяват елипсовидната траектория. Но от друга страна се търси да са с минимален диаметър за да се се увеличи контактната площ между опорите на буталата и плочата. Което е характерно за тази конструкция е че дори има по-голяма свобода на движение на плоча притискаща сравнение с другите конструкции с притискане със сфера.
Здравствуйте мне нужен связ с вами. Меня зовут Манвел.у меня праблемы маслонасосы м вашего производства
8 903 335 34 39
www.adityasharmaacademy.com/2020/08/function-of-swash-plate-swash-plate.html
tu animación tiene un error en cuanto a los colores de succión y presión el color azul es para baja presión que en este caso es succión y el rojo para presión y es cuando comprime , tu explicación de los colores es correcta pero en la animación están volteados se indica rojo para succión y azul para presión cuando debería de ser al contrario y coincidir con las indicaciones al lado izquierdo de la animación saludos
Sir problem my pump new saman dala.way problam
www.adityasharmaacademy.com/2020/08/function-of-swash-plate-swash-plate.html
Sir main pump ka puraa saman naya dala fir Bhi pressure nahi ban raha hai
Pl call me konasa company ka pump hai
www.adityasharmaacademy.com/2020/08/function-of-swash-plate-swash-plate.html
bunicimo el bideo amigo pero falto la explicacion
www.adityasharmaacademy.com/2020/08/function-of-swash-plate-swash-plate.html
❤
very good
this is a slide show. There is no animation.
👌🏻👍🏻
I like
реставрация крышки насоса ruclips.net/video/mUY68FXpKSA/видео.html
Ok
Pawar plants w.t hy pump axel pusten pump warming videos
Like
pc200,6 كوماتسو
Thanks
Excellent animation...