I have had this case for a few months and I get to say that while the case is cool, the software Hyte Nexus has not had any updates since release and there are some extremely annoying issues. The main issue is the software always starts up on the screen when the computer starts, as there is no start minimized feature. Secondly, since it is considered another monitor, the mouse can occasionally get lost inside their screen. Finally, the responsiveness of the touch screen is not as great as you would hope. Hopefully Hyte will correct these shortcomings soon, but as of yet I see no active development of the nexus software. For $350 I really expect much better support.
@@jsizzle2k6 Not really want it for the touch, the main reason is it's a bigger case and I can actually fit the ice giant CPU Cooler in it (which very few cases can). Not even the Y60 can fit it.
Anyone having issue with the touch screen not connecting correctly, changing the orientation of the display in nvidia control panel worked instantly for me
@@B_WOOD808 None of the "gestures" work. It interacts with my monitor, not the touch screen. Support took me to several videos, uninstalling and reinstalling. Unplugging, power cycle, etc. As of now, it'll display some widgets (though it won't recognize my location or find it for the weather). So, its pretty, but has no function, such as volume control in discord, etc.
I just installed my Snow White Y70 infinity touch panel and it took a few times of uninstalling and reinstalling to get it to go through the install process and once it finally installed I got a notification saying that my firewall blocked some or all of the nexus features and I clicked allow but the app itself will NOT open?!?!
how do u arrange widgets? i cant figure out how to drag them to re-arrange them, like move one from on the top below other one etc. is there actually no way to do this?
@HYTE, Can you add a feature to start the Nexus Software minimized or open in background? I dislike how the software is the first thing that opens automatically and stays open until you close it.
@@krukbee Pressing "enter" as it describes in the steps ends the calibration. It doesn't move the instructions to the Y70 monitor. You can recalibrate through Nexus, but that is just touching the screen.
hi sorry for bad english i have y70 but have 8 hours the display on the was the second to second the display picture on my desktop. some minutes later it gone black and i have complete time black pic und install nexxus 10 times but he not stzart display have you a tipp or is it wrecked after 10 hours
Bonjour, il prétend que mon écran n'est pas connecté pourtant il est.. et il fonction comme pad de souris.. Pouvez vous me donner la solution a mon problème ? merci d'avance.
Happens to me if i shut down nexus and reopen it says the same thing what works for me of i run nexus on start up and restarting the pc might work for you if you haven't tried that already
Just bought the Y70 touch screen after multiple attempts the touch screen remained black and it said no signal when I turn it on someone pls help.Thanks.
Sadly I think the last of my parts are going to beat your multi month backorder countdown. Would love to build in the Y70 but it looks like Phantek gets my money again.
hi hyte, i bought a y70 touch last week,I was able to install a new case,first of all, the case has excellent material quality and width size, everything is perfect, now let me get to my question, I installed the nexus program, but I want to run the wallpaper engine, it was working until I installed the program, but now I can't turn off the nexus, how should I do it?
This case dispaly is working in maindisplay ( y70 touch) and all touch is working good but change the display setting touch is not working . what i do this problem.u have solution send me bro.
Does the Hyte USB connector need to be connected to the motherboard or can i do without? As I only have 2 mthrboard USB ports and alrdy using 3 other connectors
The monitor I’m using is showing the picture in landscape mode but the y 70 touch screen is showing the picture sideways. I tried to go into the window display settings as well as the Nexus software and change the screen settings but I’m having no success. Please help.
Whenever I plug it into my gpu it takes over my monitors screen and monitor goes off? how do I get rid of this I basically have no monitor or no lcd screen
the 1st screen with the dock icons (file explorer etc) at the bottom are off center even after calibration and correct screen resoultion. Anyone have any fixes? Ive tested a 4070 and 4080 GPU, swapped power supplies, reinstalled nexus, and nothing is fixing it.
Hi @Mamaacookiee, sorry to hear you're having trouble. Please check out the help center on HYTE.com or join our discord and we're more than happy to help you out.
this software is pretty horrible. just dropped almost 400 bucks for a case and the software is garbage. buggy as hell. dont do what u want it to do. confusing as hell. like something for a mac not pc. widgets are pointless. cpu and gpu do absolutely nothing just list the name of your model.
I have had this case for a few months and I get to say that while the case is cool, the software Hyte Nexus has not had any updates since release and there are some extremely annoying issues. The main issue is the software always starts up on the screen when the computer starts, as there is no start minimized feature. Secondly, since it is considered another monitor, the mouse can occasionally get lost inside their screen. Finally, the responsiveness of the touch screen is not as great as you would hope. Hopefully Hyte will correct these shortcomings soon, but as of yet I see no active development of the nexus software. For $350 I really expect much better support.
Did they fix it? Just got the case delivered 😅
@@chaoschaot3805 yes and no. they fixed some issues but others remain. they are putting more updates out so I am more hopeful than I was.
same to me, did u get the fix it? am stuck
@@chaoschaot3805did it get fixed?
I honestly can't wait to get this case for my next build🥰
Keep up the amazing work👍
dont the screen is trash
@@jsizzle2k6 Not really want it for the touch, the main reason is it's a bigger case and I can actually fit the ice giant CPU Cooler in it (which very few cases can).
Not even the Y60 can fit it.
Im at a loss for words. This looks incredible. Like a look into the future. Amazing
Nice video, i would like to purchase this HYTE Y70 Dual Chamber Mid-Tower ATX Case - Black in UAE, Any affordable sellers in GCC for Gamers?
Anyone having issue with the touch screen not connecting correctly, changing the orientation of the display in nvidia control panel worked instantly for me
I can’t get the white screen for NOTHING. I’ve verified everything is plugged in correctly. Now waiting on nexus to see what’s the next step
Have you found a fix? It popped up but disappeared instantly and I can’t use the touch screen
Why if i touch the monitor
It only show the fingerprint on my main monitor
I cannot touch the calculator or anything
Please help me thanx
One day, maybe, I'll hear back from support...
whats the prob ?
@@B_WOOD808 None of the "gestures" work. It interacts with my monitor, not the touch screen. Support took me to several videos, uninstalling and reinstalling. Unplugging, power cycle, etc. As of now, it'll display some widgets (though it won't recognize my location or find it for the weather). So, its pretty, but has no function, such as volume control in discord, etc.
@@vik12D Were you able to fix it? I have the same problem :C
@@pablotas_rl7779 Nope. No help from support. At this point, I leave the screen unplugged. Negating the whole reason for having it.
I just installed my Snow White Y70 infinity touch panel and it took a few times of uninstalling and reinstalling to get it to go through the install process and once it finally installed I got a notification saying that my firewall blocked some or all of the nexus features and I clicked allow but the app itself will NOT open?!?!
So my y70 won't calibrate? It doesn't give me the option to do so
Hast du den mit dp Kabel hinten angeschlossen mit deiner grafikkarte? Lg
@@xanty_goldwelches kabel is das genau? ich hab so ein richtig kurzes monitor kabel
how do u arrange widgets? i cant figure out how to drag them to re-arrange them, like move one from on the top below other one etc. is there actually no way to do this?
@HYTE, Can you add a feature to start the Nexus Software minimized or open in background? I dislike how the software is the first thing that opens automatically and stays open until you close it.
how do I stop the mouse cursor from going to it? It's soo irritating.
Go onto display settings where you'd go if you have dual monitors... lower it down it makes it alot harder to get the mouse onto it.
I only got loading screen. I was patience, i waited 2 hours.... Restarted, tried again, still loading screen. Worth the freakin 400 bucks..
After calibrating, it diesnt register touch. Touching it acts like Im holding LMB on my monitor.
you have to press enter and move the calibrating instruction to the y70 monitor
@@krukbee Pressing "enter" as it describes in the steps ends the calibration. It doesn't move the instructions to the Y70 monitor. You can recalibrate through Nexus, but that is just touching the screen.
Come faccio a entrare nel bios dallo schermo senza per forza vederlo nel display?
hi sorry for bad english i have y70 but have 8 hours the display on the was the second to second the display picture on my desktop.
some minutes later it gone black and i have complete time black pic und install nexxus 10 times but he not stzart display have you a tipp or is it wrecked after 10 hours
i think i messed something up because i didnt get any of those pop ups. my screen is stuck on a "y70 touch" screen
Make sure you’re plugged directly to the motherboard on the usb for the screen and not into a splitter I just had that happen on mine
@@C_patterson92 you mean connect rhe main monitor to the motherboard?
Can this software be used with the screen you can buy for the Y60 case?
no
This case is absolutely fire!
Bonjour, il prétend que mon écran n'est pas connecté pourtant il est.. et il fonction comme pad de souris.. Pouvez vous me donner la solution a mon problème ? merci d'avance.
When will this Y70 case arrive in Brazil ?
Hi, the faces cant detect the screen, even when i turn on the nexus and the screen says "y70 touch" on it. How can I fix it?
Happens to me if i shut down nexus and reopen it says the same thing what works for me of i run nexus on start up and restarting the pc might work for you if you haven't tried that already
Yepp getting this for my build to, i cant waaaait! :D
Looks awesome!
Just bought the Y70 touch screen after multiple attempts the touch screen remained black and it said no signal when I turn it on someone pls help.Thanks.
Same
Sadly I think the last of my parts are going to beat your multi month backorder countdown. Would love to build in the Y70 but it looks like Phantek gets my money again.
hi hyte, i bought a y70 touch last week,I was able to install a new case,first of all, the case has excellent material quality and width size, everything is perfect, now let me get to my question, I installed the nexus program, but I want to run the wallpaper engine, it was working until I installed the program, but now I can't turn off the nexus, how should I do it?
nevermind i found it, you turn it off from the settings inside the nexus, the windows background is coming.
This case dispaly is working in maindisplay ( y70 touch) and all touch is working good but change the display setting touch is not working . what i do this problem.u have solution send me bro.
Just got mine, how do I add custom widgets, what files will it take?
What if the screen do not go white during calibration. Mine won't let me calibration
How do you change the resolution of the touch screen? its permanently stuck on 550x1920 for me =/
Under performance, can it also show power draw?
Does the Hyte USB connector need to be connected to the motherboard or can i do without? As I only have 2 mthrboard USB ports and alrdy using 3 other connectors
Support for Linux??
What could be the reason why all the taskbar icons are suddenly opened since I started using the case? although I don't touch it
The monitor I’m using is showing the picture in landscape mode but the y 70 touch screen is showing the picture sideways. I tried to go into the window display settings as well as the Nexus software and change the screen settings but I’m having no success. Please help.
Whenever I plug it into my gpu it takes over my monitors screen and monitor goes off? how do I get rid of this I basically have no monitor or no lcd screen
Is it possible to make my own video background or only the preloaded ones?
Yes it is
This may be the last case I'll ever buy
I can't use the touch function because the monitor isn't recognized by the software. I uninstalled the app several times and checked all the cables
How much is it?
I do not have an option for faces and cannot change the front panel, does anyone know why?
how to download the case?
Mine says no touch screen detected but it turns on an i can see my desktop. Help?
hyte, suggestion can you add accessory rack for extra HDD/SSD, I had 5 ssd but the y70 can accommodate 4 ssd/2 HDD
Invest in m.2 nvme so some are on your board lol. I have 3 ssd on my board 6tb total. Do you have 5 sata ssd 256 gb?
@@dassbear I dont have 256 gb all are 1 tb/500gb
I have the system since a Week and Overall i live the case, but the Software sometime crash and the configuration is not so intuitiv
😮😲😯😳
the 1st screen with the dock icons (file explorer etc) at the bottom are off center even after calibration and correct screen resoultion. Anyone have any fixes? Ive tested a 4070 and 4080 GPU, swapped power supplies, reinstalled nexus, and nothing is fixing it.
i hope you can add discord as a shortcut
the software doesnt start by windows 11 or is there something i need that it starts?
only hyte nexus but i have the problem that i can´t calibrate the screen it shows only y70 touch screen
Cool
How do I get my browser to stop showing on my LCD screen on my Y70
Make your other monitor your preferred monitor in the display settings.
so my y70 isn’t being detected, anybody have any help ?
I wish u caould use discord on it! It would be super handy
obs wasnt working for me, anyone else have this issue?
oh trop chouette cette façade lcd
takes forever to load and never actually happens anyone got any ideas? thanks in advance
Yeah, use Rainmeter + Wallpaper Engine.
It just says no sigal pls help
Hi @Mamaacookiee, sorry to hear you're having trouble. Please check out the help center on HYTE.com or join our discord and we're more than happy to help you out.
@@hytebrand ok thanks
I want it so bad
You skiped wheather why? LOL
Y60 can’t do nun of this
I got a black screen that’s it 💀
Hey @4mil97 sorry to hear on the issue you're having. Please check out the help center on HYTE.com or join the discord and we'll help you out!
this software is pretty horrible. just dropped almost 400 bucks for a case and the software is garbage. buggy as hell. dont do what u want it to do. confusing as hell. like something for a mac not pc. widgets are pointless. cpu and gpu do absolutely nothing just list the name of your model.
thumbs down for skipping weather.
Although this is nice it'll annoy the heck out of you when something goes wrong.