Never understood why they used the G5 version, there was Intel Mac Pro in this chassis (well similar with different cut outs), it should have been easier... I guess G5 ones were cheaper on ebay.
@@katecolleary6382 they will try to it is rather possible that they tell you they analysed the unit and it requires replacement, as a repair would cost mucho dinero. not noticing it is not actually a Macintosh, because they did not actually Analyse it...
When did comments in the form of this one start being every where? E. G. : Someone in Video: "Says something" Someone else in video or not: "Hold my beer" Seriously, every video has the first 25 comments in this format and you cannot see a single video without them? Is this the popular thing for people born after 2000 or something?
hahaha this is the tools requirement form the service manual... fuck that... The following tools are required to service the computer: Long-handled magnetic Phillips screwdriver (10-inch shaft) Short-handled magnetic Phillips screwdriver Flatblade screwdriver Jeweler’s flatblade screwdriver Nylon probe tool (black stick 922-5065) Needlenose pliers Small wire cutter Long-handled 2.5 mm hex wrench Mat knife and cup hook (to remove locking rivet) Tape (for temporarily holding cables out of the way) Small mirror (for seeing small boards inside the enclosure) Soft cloth (for protect removed parts from scratches)
@@robertt9342 I thought it was obvious that wasn't a real opinion. After all, the Genius Bar doesn't repair devices, they just tell you to either to buy a new one or they replace all the internals (I guess one could argue that this is technically repairing) making it cost more than a new one and Louis knows this.
it is straightforward. if you use tools and not your bare hands to take it apart. everything you'd usually want to access (pci/agp, ram, hdd's, odd) is all neatly catagorized and accessible. it's arguably apple's most user friendly computer to service they ever made.
It's straightforward to people with intelligence and working brains; if you're not an absolute caveman for the sake of 'entertainment' then it's *by far* one of the best, most well built and professionally well designed machines on the planet. Back in the day nothing came close. Ever. About 17 years later other companies are catching up. Besides maybe the HP VooDoo Firebird, that thing was... stunning. May buy one to do a "Linus Special" like in this video, but for a gaming rig.
@@Ashleyyyyy666 except that "tools" isn't available publicly and can only be found on apple service center. and this is why he goes ham and bruteforce it
When you do multi-part videos like this can you post a link to the earlier videos in the series so it's easier to watch the entire series? It would be nice if you edited the old video to have a link to the next video in the series also, but that might be askign too much.
When did comments in the form of this one start being every where? E. G. : Someone in Video: "Says something" Someone else in video or not: "Hold my beer" Seriously, every video has the first 25 comments in this format.
@@Incurafy It is easier on the metal than conventional Sharpe maker (they may "eat into" shiny finished metal surface making your machine the surface again to remove it... our shop instructor told us a story a guy ruined a part worth 3 grand by write some marking on it... using a Sharpe)
"I wanna bet alot you didn't have a ton of faith in this project when we began" Watched Linus pointlessly tear apart a g5 Mac case, Faith Ummm I still don't any
When did comments in the form of this one start being every where? E. G. : Someone in Video: "Says something" Someone else in video or not: "Hold my beer" Seriously, every video has the first 25 comments in this format.
2:40 -- Rare footage of the Canadian Sandled Tech Orang-utan in its natural environment. "Here we see the dominant male of the group cracking open a husk to get at the goodness within." /Attenborough voice
@@mbolchunas I'm so sorry :/ I wish I could build a modern PC in one of those beauties but it seems much damn work. I don't think I have the skills or the time for it unfortunately.
byzhiphop Theres a Kickstarter called Dune, which is creating replica Mac cases for standard pc parts. Seems pretty interesting. Dunno if they can actually deliver tho.
@@iMapleCreator that looks pretty cool! I hope they deliver. Though I wonder if they make or are planning to make one in the old Mac Pro style (not the trash can but the tower). I usually like Apple's design but I'm not a fan of the new one's look. 😟
I asked myself this question a few days ago and I think that the simple answer is, they are now resting in the workshop and used as tools instead of decoration.
4:46 "I'm sure all the seasoned Mac technicians out there are like "LOL, well actually..." No, I'm pretty sure they are screaming uncontrollably while watching you defile that Mac's mutilated corpse. On the other hand, that back plate you did is looking pretty good. There is indeed a lot of work ahead, but it's shaping up great.
@@ratuldeoun7228 it probably has little value as a working PC (although, again, I saw a lot of videos where this machine is playing RUclips, for example) but it will soon have a pretty high value as a collector's item. It looks amazing and it's the last PowerPC desktop ever made.
3:55 the mobo goes with it, my god how even... Also I've always been impressed by the size of IBM's PowerPC processors, they are small, compact, but rarely or never on a socket, mine is soldered on my AS/400 preventing any upgrade.
@@VolumeZero374 Did she get them taken out without anaesthesia? I got mine taken out a few weeks ago, and the only thing I felt was the prick of the syringe with anaesthetic.
@@User_2 My dentist allowed me to bring my own music. I enjoyed Poledouris Hymn to Red October most. It did not overpower what happened in my mouth - no music can, I tested Sabaton (metal) - but it was strong enough to give me something to focus on, while still being somewhat calming.
chnapo1 This is a genuine question, what university degree so you need to be able to build and configure a pc like this, I find this so fascinating, some of these videos reach the upper limit of my knowledge on this shit and I need to learn more😩🙏
"I bet a lot of you didn't have faith". Whaat? I totally have faith, with such resources and around 30 talented people like Alex, Anthony, Jake etc. you need to be able to pull of crazier projects!
Linus: Takes apart a whole powermac so he can put the components in Also Linus: we have to cut these components out, but why would we do that? just take another case that is already done..... Viewers: BUT WHY???
From a previous video it seemed like they were moving most general tools to the new workshop area and then tools specific to PC-builds were going to be put in the workshop through that door you can see behind him in this video
That wisdom tooth comment as you were prying standoffs out of the case!!! What horrible memories. I definitely had a rough day after a hammer and chisel beat my teeth out. Thanks!
4:38 Funny how you said it felt like when you had your wisdom teeth removed. I am actually watching this with a very very very saw bottom jaw after having 4 taken out yesterday. Still painful even though on very strong painkillers.
Ashame regardless that you taken it apart. But what I’ve done with one of my G5’s was tried my best to keep the G5 look. Did well didn’t cut much reused the rear fan Assembly and fitted new 92mm looks great front I/o with new usb parts and the original power button. What an amazing case and computer.
Having worked in several service departments, though not for Apple, my personal favorites are the ones that's obviously been opened and messed with while the customer swear to high heaven that no one has even as much as looked at it with a screwdriver in the room. That ribbon cable that wasn't plugged in had to have been like that from the factory, and those screws that was missing, and that self tapping screw that you've never seen in any other of these computer, yea that to came that way from the factory... A few times when I saw mismatched screws or a chassis that didn't quite go together the way it was supposed to I called in another technician as a witness when I first opened the machine. Later as camera tech evolved and digital cameras got to be actually usable and no longer was just novelty items I started filming the disassembly, just in case...
I love the contrast between Linus being all serious and the editors adding in these little quips and past-times. Really keeps the video informative but also entertaining at the same time!
When you do these multi-part videos PLEASE keep the titles consistent, and put links to prior parts into the description of the subsequent videos for those who missed out. It was a bear finding "The Mac Pro Apple WISHES they built - pt 1" instead of "Hack Pro Pt. 1" like I would have expected. And since there were no links in the descriptions, I was on my own to find part 1 and get caught up.
Its been a while since you posted this build. I for one am interested in seeing how this compares with the new Mac Pro 2019. Were you able to finish it or is this going to slip into obscurity? I was really keen to see you finish this and the final results.
Linus: you gotta be careful when removing these parts because you might not know when there are working parts Also linus: *runts and grunts as he fiercely rips away the components* Also linus: oh cool !! So this part....
Most people's solution when trying to take apart a weird computer: Huh, this is catching, perhaps I should see what is catching and consider another approach and or take a while to remove the standoffs. Linus solution when trying to take apart a weird computer: BRUTE FORCE! Honestly not really what I expected. But it is Linus, expect everything. Especially dropping stuff.
“I’m willing to bet that a lot of you didn’t have a ton of faith in this project...” Between Alex in fabrication, Tehran in design, and Anthony working on VMs there isn’t much that team can’t do!
Right now, somewhere. An Apple product designer is sitting with a glass of whiskey in front of him, his hands across his face saying "My baby.. Why did you do that to my baby!!" :D
as a seasoned apple tech, i can verify linus' method of disassembling the g5 was indeed much easier, less time consuming and less frustrating than the proper way.
Next build : Toaster PC, build a pc that looks like a toaster case or literally build a pc inside of a toaster. Cool it with an energy drink for bonus points. For total gamer points add a lot of rgb...
Linus: *breaks apart the guts of a g5 in order for the case to be used.
Also Linus: *proceeds to show us an already prepped up case.
I can't believe they made a 12minute video of them just putting things against the walls of a case. WTF.
@@curt8806 its Linus, its over 12 misnaming too, that means a bit more money(?) too??? idk
e-waste - is not a major concern
Never understood why they used the G5 version, there was Intel Mac Pro in this chassis (well similar with different cut outs), it should have been easier... I guess G5 ones were cheaper on ebay.
@@blitzwing1 nah, use fire. more effective.
Would love to see them take that Power Mac to an authorized Apple repair center.
They would probably just send you out with a new unit.
@@katecolleary6382 they will try to
it is rather possible that they tell you they analysed the unit and it requires replacement, as a repair would cost mucho dinero.
not noticing it is not actually a Macintosh, because they did not actually Analyse it...
wow, u so edgy
They will say "the motherboard Will need replacement n it will cost $10000 + labor fees"
I want to see this happen
Verge: "How to build a computer"
LTT: "How to disassemble a computer"
*disassemble
You: "How to tipe"
When did comments in the form of this one start being every where? E. G. :
Someone in Video: "Says something"
Someone else in video or not: "Hold my beer"
Seriously, every video has the first 25 comments in this format and you cannot see a single video without them? Is this the popular thing for people born after 2000 or something?
hahaha this is the tools requirement form the service manual... fuck that...
The following tools are required to service the computer:
Long-handled magnetic Phillips screwdriver (10-inch shaft)
Short-handled magnetic Phillips screwdriver
Flatblade screwdriver
Jeweler’s flatblade screwdriver
Nylon probe tool (black stick 922-5065)
Needlenose pliers
Small wire cutter
Long-handled 2.5 mm hex wrench
Mat knife and cup hook (to remove locking rivet)
Tape (for temporarily holding cables out of the way)
Small mirror (for seeing small boards inside the enclosure)
Soft cloth (for protect removed parts from scratches)
Destroy***
"I can't belive it all fits!"
G5 case "Gentle, please"
Linus: "I'll go slowly, and be careful."
G5 Case 3 seconds later: *_"Oh GOD!!!_*
This is art.
Don’t let Deviant Art see this comment
@@touchofthorn1841 oh no
Linus Sex Tips ( ͡° ͜ʖ ͡°)
Yo richfiles, if you take that outta context though......
Louis Rossman: This is how they handle your Mac at the GeniusBar
Hmmmm... If he did imply such things then I guess opinion doesn't mean much.
@@robertt9342 I thought it was obvious that wasn't a real opinion. After all, the Genius Bar doesn't repair devices, they just tell you to either to buy a new one or they replace all the internals (I guess one could argue that this is technically repairing) making it cost more than a new one and Louis knows this.
"Everything is designed to be straightforward"
Lol, this was great.
it is straightforward. if you use tools and not your bare hands to take it apart. everything you'd usually want to access (pci/agp, ram, hdd's, odd) is all neatly catagorized and accessible. it's arguably apple's most user friendly computer to service they ever made.
It's straightforward to people with intelligence and working brains; if you're not an absolute caveman for the sake of 'entertainment' then it's *by far* one of the best, most well built and professionally well designed machines on the planet. Back in the day nothing came close.
Ever.
About 17 years later other companies are catching up. Besides maybe the HP VooDoo Firebird, that thing was... stunning. May buy one to do a "Linus Special" like in this video, but for a gaming rig.
@@Ashleyyyyy666 Kids on the internet don't know anything, lol. His comment "was great."
@@Ashleyyyyy666 except that "tools" isn't available publicly and can only be found on apple service center. and this is why he goes ham and bruteforce it
xs3tsunax wrong. Iirc it uses normal screws that anyone with an ifixit kit can undo
When you do multi-part videos like this can you post a link to the earlier videos in the series so it's easier to watch the entire series? It would be nice if you edited the old video to have a link to the next video in the series also, but that might be askign too much.
For a hypersquirrel like Linus? Way too much asked...
And have the titles be consistent. I've noticed that issue a lot with multi-part videos like this. This series is no exception.
ruclips.net/video/o3HlyPsf9uo/видео.html
Also this ruclips.net/video/0TBQ_DHCtmI/видео.html
For a team of 25 people is not that much though
Linus : we should do this slowly and carefully
Also linus : YEET
When did comments in the form of this one start being every where? E. G. :
Someone in Video: "Says something"
Someone else in video or not: "Hold my beer"
Seriously, every video has the first 25 comments in this format.
@@post-leftluddite kids aren't very original
Hello my friend
@@SpektrikMusic
>kids aren't very original
>kids
So naive.
Non-working or not, still cringed at that G5 "disassembly" LOL.
Bolling Holt I modded one of these myself. They‘re not hard to disassemble... Either Linus is terribly impatient or they just wanted to mock Apple.
Leo Klaus It’s a pretty big pain in the ass, but not as bad as he made it out to be
I dont like Apple and so what if it wasnt working but he just ripped it appart for just no damn reason at all not even to use the case =/
The thing that annoys me about this is that I've torn these down before and it really isn't that difficult.
Title of the video: "Can't believe it all FITS!!!"
Linus 5 minutes in: "DP"
That's what she said...
what does this means?
@@utentecaal5660 If you don't already know and don't wanna google it you probably shouldn't know
displayport
jk
@@juanp.5993 i already google it but i find out that something whatsapp releated
Wen the ‘adapter’ they use is just a big blue metal windows logo.
@@han5vk I didn't know what it was or what it was for, so eh, great comment.
They actually used proper layout dye, I am surprised.
@@Incurafy It is easier on the metal than conventional Sharpe maker (they may "eat into" shiny finished metal surface making your machine the surface again to remove it... our shop instructor told us a story a guy ruined a part worth 3 grand by write some marking on it... using a Sharpe)
@@AaronShenghao That's cool, thanks for the info. :D
I think thats a flag of FInland
"I wanna bet alot you didn't have a ton of faith in this project when we began"
Watched Linus pointlessly tear apart a g5 Mac case,
Faith Ummm I still don't any
Hi dear
me too xD
Linus: "We don't want to damage anything that could work"
Also Linus: "Starts ripping out coolers and fans"
Yeah that really hurt me D: I remember the G5 fondly. Was such a good machine back then. Its hard to find complete ones.
When did comments in the form of this one start being every where? E. G. :
Someone in Video: "Says something"
Someone else in video or not: "Hold my beer"
Seriously, every video has the first 25 comments in this format.
2:40 -- Rare footage of the Canadian Sandled Tech Orang-utan in its natural environment.
"Here we see the dominant male of the group cracking open a husk to get at the goodness within." /Attenborough voice
hehe
Hello
I'm pretty sure I had a stroke when that Radeon sagged
Linus ripping out the cpu's really hurt me as a fan of technology...
CPUs???
Golden Empire Productions the CPU’s were attached to the heatsink’s
DP = Dual Processor
"Get your head out of the gutter"
-Linus 2019
I mean display ports are pretty gross.
bow chica wow wow!
Am i too pure cuz idk what else it could of meant
Ale Sen you don't want to know, *DON'T* look it up
the Director of Photography isn't that kinky
0:41
the most alpha run i ever saw
Humanity is sooo doomed...
@@sleeptyper talk about being a drama queen he just ran weirdly
@@ni.ko3869 You must be funny at parties...
@ni.ko386 Its fun at parties 4Head
sleeptyper probably doesn’t get invited to any in the first place
Linus taking a dump on Apple while wearing an apple watch.
Yes xD
😂😂
I'm glad you commented on this. So confused...
"Peak hypocrisy"
His channel is based on reviewing products, might be trying the new series 5 of apple watch.
"I can't believe it all FITS!"
- LMG 2019
-Thats what she said-
This isn't even the hardest part yet
Hey
@@justAguyDs ...
I've never had to worry about this.
3:00 you dont want to RISC damaging anything. Hehe get it
I'll see myself out
Hehehehehe
“I don’t always drink water, but when I do, it’s from my LTT water bottle.” *LLT store plug Intensifies*
Every second of him gutting that Mac had me fearing for his soon to be bloody hands.
Pierre Evers asshole.
Na it's a mac g5 not a x86 desktop cheap case.
@@Damicske Bruh it being a Mac doesn't magically make it's sharp edges safe to touch. And the case has nothing at all to do with a CPU being x86.
@@josh6567 This is correct. Which door would you like to open?
There's a Kickstarter called Dune. They make replica Mac Pro 2019 cases but for standard PC components.
@@sulaiman9766 hey, there is a button called CAPS LOCK find it and press it.
YEAH LTT KNOW ABOUT IT AND THIS VIDEO WAS SHOT MONTHS AGO AND ALSO THIS MOTHERBOAD DOES NOT FIT IN NORMAL CASE
also with the cd tray that has the sliding door?
you bitch thats not a powermac g5 copy
@@FirstCllass Why? The point is building something unique with a bit of a challenge not just buy shit.
Linus , Where is part 3 ?
WHERE IS IIIIIIIIIIIIIIITTTT...
@@jhkcreates It's called "Water cooling the FASTEST Mac on the Planet"
Lol ur pfp is the ppsspp emulator logo
did you guys ever finish this? still interested to see the final product.
The old Mac Pro case is so damn gorgeous.
I hate myself for giving mine away back in the day...
@@mbolchunas I'm so sorry :/ I wish I could build a modern PC in one of those beauties but it seems much damn work. I don't think I have the skills or the time for it unfortunately.
byzhiphop Theres a Kickstarter called Dune, which is creating replica Mac cases for standard pc parts. Seems pretty interesting. Dunno if they can actually deliver tho.
@@iMapleCreator that looks pretty cool! I hope they deliver.
Though I wonder if they make or are planning to make one in the old Mac Pro style (not the trash can but the tower). I usually like Apple's design but I'm not a fan of the new one's look. 😟
This was a Power Mac G5. The only real difference would be the additional optical slot.
I like how 90% of the tools is missing from the wall.
they are in the new workspace.
I asked myself this question a few days ago and I think that the simple answer is, they are now resting in the workshop and used as tools instead of decoration.
Better be or heads will roll hehe
I like the big Windows logo 0:17, it’s very nice
So, is there a pt. 3 coming soon? :-)
i had the same question..
Guess not, wonder if they just misnamed the pt4 video or if part 3 is sitting somewhere in LTT
the part 3 file might have been corrupted
It’s here. Just named differently. ruclips.net/video/Td1lgAW08ho/видео.html
2:53 And just like that, I was traumatized for life.
Me too. I run one of these machines on Linux for low powered gaming.
4:46 "I'm sure all the seasoned Mac technicians out there are like "LOL, well actually..."
No, I'm pretty sure they are screaming uncontrollably while watching you defile that Mac's mutilated corpse.
On the other hand, that back plate you did is looking pretty good. There is indeed a lot of work ahead, but it's shaping up great.
This one physically hurt.
Linus: *says to remove everything carefully*
Also Linus: *tears apart every part in the machine like it's a piece of trash and absolutely no value*
to be fair, it was a mac. it didnt have value.
@@companyoflosers TBH the highest end PowerMac G5 still has a little value. At some places, it is selling for about 200.
@@ratuldeoun7228 really, why ? would not even pay 5.
@@ratuldeoun7228 it probably has little value as a working PC (although, again, I saw a lot of videos where this machine is playing RUclips, for example) but it will soon have a pretty high value as a collector's item. It looks amazing and it's the last PowerPC desktop ever made.
Good day
I thought I had already seen this video, turns out it was just the title being used on a different website.
Ahhhhhhhh ahhhhhhhhhhhhhhhhhhhhhhhhhh
Ahhhhhhhhhhhhhhhhhhhhhhhhhhhhhahaahahhhhhh
3:55 the mobo goes with it, my god how even...
Also I've always been impressed by the size of IBM's PowerPC processors, they are small, compact, but rarely or never on a socket, mine is soldered on my AS/400 preventing any upgrade.
you take hackintosh to a whole new level lol linus ive been watching your videos since day one YEARS N YEARS LOL always the best tech vids.
Linus - "Feels like when I was having my wisdom teeth removed"
Me - *intense flashbacks*
Well my mum just had hers out and she says its the worst pain shes ever felt
@@VolumeZero374 Did she get them taken out without anaesthesia? I got mine taken out a few weeks ago, and the only thing I felt was the prick of the syringe with anaesthetic.
oof
I'm having mine taken out in 2 hours
@@User_2 My dentist allowed me to bring my own music.
I enjoyed Poledouris Hymn to Red October most. It did not overpower what happened in my mouth - no music can, I tested Sabaton (metal) - but it was strong enough to give me something to focus on, while still being somewhat calming.
"I can't believe it all FITS!!!"
-Ebony pornstar, 2019
link?
No, just no...
@@alil1294 Racist
alili1294 racist
@@yourneighbourhooddoomer triggered much
That moment when you realize its been so long sense part 1 came out you don't even remember there was one.
"Everything is designed to be straightforward"
Including self-servicing Apple devices?
5:35
linus : spec here 2 ghz dp
google : did u mean double penetration
linus : no its dual processor
chnapo1 This is a genuine question, what university degree so you need to be able to build and configure a pc like this, I find this so fascinating, some of these videos reach the upper limit of my knowledge on this shit and I need to learn more😩🙏
@@diegoamorim7924 honestly youtube videos will teach u everything about pc building to this degree
"these are thicc too"
- Linus 2019
ULTRA ok boomer
Jeff Jefferson ok boomer
give this to ijustine and see how she reacts.
He is like pouring all his anger on Apple on that poor G5😂😂
"I bet a lot of you didn't have faith". Whaat? I totally have faith, with such resources and around 30 talented people like Alex, Anthony, Jake etc. you need to be able to pull of crazier projects!
That apple Watch is crying "Why you Mean man you Kill my Grand Pa Pa! Grand Papa Nooooo Stop it mean man stopppp!"
Linus: Takes apart a whole powermac so he can put the components in
Also Linus: we have to cut these components out, but why would we do that? just take another case that is already done.....
Viewers: BUT WHY???
When you said "DP" I honestly thought you meant DisplayPort.
I like how all the tools on the wall are gone and missing
With Linus there it was probably the right call. - Somebody here in the comment section. Oh, right. Me.
From a previous video it seemed like they were moving most general tools to the new workshop area and then tools specific to PC-builds were going to be put in the workshop through that door you can see behind him in this video
@@Sharklops Yeah, the new tool-shop / man-cave is pretty epic.
they are moving to a different workshop, they posted it on instagram and twitter
Can we see some of the machining done to make the adapters in that new shop?
That wisdom tooth comment as you were prying standoffs out of the case!!! What horrible memories. I definitely had a rough day after a hammer and chisel beat my teeth out. Thanks!
Linus: and be careful
Linus 1 second later: *break everything*
this kills me lmao
Is pt 3 ever coming out?
RUclips: Double Ads
Linus: Double Ads
FINALLY !!!! I was pretty anxious to watch the PART 2 of this project !!!
4:38 Funny how you said it felt like when you had your wisdom teeth removed.
I am actually watching this with a very very very saw bottom jaw after having 4 taken out yesterday.
Still painful even though on very strong painkillers.
My jaw hurts thinking about it, sorry man get well soon.
RIP to everyone who just googled “DP”.
RIP
Shoutouts to those who didn't have to google
@@Yuzuki1337 🤙
DisplayPort
Haha dude perfect amirite guys?
Where's part 3? It's been 3 months
Linus: Children of all ages
Also Linus: swears
@Benny T ( ͡° ͜ʖ ͡°)
@Garland Key (first off, I'm 15) they do, but they're not supposed to
(I'll even admit, I do that a bit)
Ashame regardless that you taken it apart. But what I’ve done with one of my G5’s was tried my best to keep the G5 look. Did well didn’t cut much reused the rear fan Assembly and fitted new 92mm looks great front I/o with new usb parts and the original power button. What an amazing case and computer.
Ok, I've been watching LTT for years, but the quality of editing in this vid is ON POINT!
How many comments are just gonna be people saying “that’s what she said?”
thats what she said
comments in Linus videos are only people trying to quote something they think is funny. 99.9% of the comments are garbage. Mine included.
haha fuuny im laughing hard
she has a massive box to be fair
@@DJChipsandGarlic Her box was massive cuz all her innards were jammed in tight and alotta her was plen-ny thicc. 🤪
Louis Rossmann says this is how franchises and AASP’s go about repair.... then they send the pieces to him.
Having worked in several service departments, though not for Apple, my personal favorites are the ones that's obviously been opened and messed with while the customer swear to high heaven that no one has even as much as looked at it with a screwdriver in the room. That ribbon cable that wasn't plugged in had to have been like that from the factory, and those screws that was missing, and that self tapping screw that you've never seen in any other of these computer, yea that to came that way from the factory...
A few times when I saw mismatched screws or a chassis that didn't quite go together the way it was supposed to I called in another technician as a witness when I first opened the machine. Later as camera tech evolved and digital cameras got to be actually usable and no longer was just novelty items I started filming the disassembly, just in case...
Part 3 please!
I love the contrast between Linus being all serious and the editors adding in these little quips and past-times. Really keeps the video informative but also entertaining at the same time!
When you do these multi-part videos PLEASE keep the titles consistent, and put links to prior parts into the description of the subsequent videos for those who missed out.
It was a bear finding "The Mac Pro Apple WISHES they built - pt 1" instead of "Hack Pro Pt. 1" like I would have expected. And since there were no links in the descriptions, I was on my own to find part 1 and get caught up.
Its been a while since you posted this build. I for one am interested in seeing how this compares with the new Mac Pro 2019. Were you able to finish it or is this going to slip into obscurity? I was really keen to see you finish this and the final results.
Title:
15 year olds: Snicker
True Adults: _wheeze_
Helli
When is part 3 coming out ??? any chance you can actualy beat the new mac pro ??
Really love the mad mods requiring actual fabrication, totally answers all questions of "can i?" or "how do i?"
Thumbs up for brute forcing everything apart. Love it haha
New alternative title:
Linus tottering a mac
Where's Part 3?
"Ladies and Gentlemen, Children of all ages"
And here I thought he'd say "Freaks and geeks, trolls and derps alike."
Linus: you gotta be careful when removing these parts because you might not know when there are working parts
Also linus: *runts and grunts as he fiercely rips away the components*
Also linus: oh cool !! So this part....
I love how all the tools are missing from the peg board.
“I can’t believe it all fits”
ha that’s what she said
Most people's solution when trying to take apart a weird computer:
Huh, this is catching, perhaps I should see what is catching and consider another approach and or take a while to remove the standoffs.
Linus solution when trying to take apart a weird computer:
BRUTE FORCE! Honestly not really what I expected. But it is Linus, expect everything. Especially dropping stuff.
“I’m willing to bet that a lot of you didn’t have a ton of faith in this project...”
Between Alex in fabrication, Tehran in design, and Anthony working on VMs there isn’t much that team can’t do!
sfollows Yeah but Linus is building/ripping it apart. I’m waiting for them to finish it and then Linus drops it while moving it.
Lol Tehran
Right now, somewhere. An Apple product designer is sitting with a glass of whiskey in front of him, his hands across his face saying "My baby.. Why did you do that to my baby!!" :D
It's really cool that you (probably Alex) have the possibility to make your own hacks/fixes for a new mac!
what a tease... I was getting really into the build, and then he hits me with "subscribe for the next part" ....
Linus: "-DP, dual processor, get your mind out of the gutter"
Degenerates: Double Penetration
Me: Diamond & Pearl
me: donkey punch
I googled it and got dude perfect
and i thought it's a display port since i was browsing for monitor earlier
I like how the plate that screws onto the motherboard looks like it has the windows icon painted onto it
blursed profile pic
as a seasoned apple tech, i can verify linus' method of disassembling the g5 was indeed much easier, less time consuming and less frustrating than the proper way.
You know how damn long I’ve been waiting for this vid ugh! I freaking luv LTT THANK YOU 4 THIS!!!!!!!
Next build : Toaster PC, build a pc that looks like a toaster case or literally build a pc inside of a toaster. Cool it with an energy drink for bonus points. For total gamer points add a lot of rgb...
Build it in the razer toaster
Apple will hire you to destroy that pc 😂
7:00 sounds perfectly like pulling a sword
lol i hear that
LMFAO
0:40 when you hear your mom pulling up to the driveway and you realized you have cleaned the house yet
There are so many channels on tech. This is why I watch LTT
Why I am the only one looking for part 3? Where is it?
Deez_Nuts? It’s called water cooling the fastest Mac on the planet
Snickerdoodle Gamer Thank you!
Half Life 3 anyone?
So this was in October! Come on where is the final video!!!
"you gotta be careful"
-Linus
BossDart dats wot she sed
Anyone else realised the video format fits the iPhone X and above screen perfectly?! MUCH more screen without the notch interfering! Brilliant
Cable management is gonna ba a nightmare. Can't wait for part 3! I know you have that space behind the Mobo but still...
PART 3!?!?!?!
linus: *literally rips up the pc*
screws and screwdriver: am i a joke to you?
Pt.3 guys
Come on it's been 3 mouth
Oh man, so looking forward to the final results!
Hopefully part 3 will come sooner than this.
Nice thing is that this build will see Catalina from very beginning.