Thank you! Will follow this video during the weekend to clean my Krups :) I suspect some pipe is blocked because it is leaking coffee. Was already considering buying a new espresso machine. But luckily found this video.
My machine is stuck in cleaning/rinsing ycle and water/coffee comes out of the bottom! Is this deep cleaning worth a go, or is it time to retire the thing?! Had it 7 years and its had a good run!
Another excellent video, thank You! Just a question. Some sellers offer a Krups repair kit with silicone grease included, do you have any thoughts on where should that go and/or how often? Many thanks!
05:00 That screw can be removed by using an 2,5 mm Allen key ...it fit perfectly. Edit: 07:54 the screw in the front upper-left side is fake, it doesn't hold nothing. 😁
Hi, our machine keeps failing to put the residue in the designated compartment. Only like 60% gets there, the rest goes everywhere in the machine. Any idea how to fix it? I already dis-an reassembled the whole thing a couple of times but no luck yet. Thanks for the video btw!
I cleaned as instructed but did not change the seals. My espresso result is diluted, not very dark. Towards the end of the pour the fluid is clear. Any suggestions?
Thank you, Adrian. Very nice and useful video. Unfortunately, I have same problem like @krisssy7150 with the spring. I don't know where the free end of this spring is fixed. One end is attached on the black plastic part but the other end? I suppose that this is my problem because after cleaning and reassembling when I try to make first coffees where very weak and I found a lot of ground coffee in the tray, right side.
Salut Adrian Dupa ce am postat, am vazut mai multe fimulete si am constatat ca de fapt exista cel putin 2 variante de arc la piston, una are arcul in forma de U iar in cealalta arcul are capatul lasat liber. La mine este ultima varianta. In concluzie problema mea cu cafeaua care in loc sa intre in pahar este deviata in tavita nu are de-a face cu arcul pistonului. Ai vreun sfat pentru mine?
Salut. Modelul cu arcul gros de diametru mare este EA 87. Dar ajuta-ma să înțeleg după ce ai făcut o curățare a aparatului a apărut problema că , cafeaua e mai slabă și a apărut cafea măcinată in partea dreapta a tăviței ?
@@benassy69 Salut Adrian. Da, problema a aparut dupa ce am desfacut espressorul si l-am curatat. Intre timp m-am lamurit cum este cu arcul la modelul acesta: este normal sa fie liber dinspre rasnita. L-am desfacut din nou, am mai facut o curatare cu pastila si o decalcifiere cu "praf" de la Krups (dizolvat in rezervorul cu apa). Dupa asta si mai multe limpeziri am scapat si de led-urile aprinse si nu am mai gasit cafea in tavita, cel putin dupa 3 cafele facute. Nu am nicio explicatie ce s-a intamplat, dar e bine! Multumesc ca-ti faci timp sa-i ajuti pe altii. Spre deosebire de alte fimulete, ale tale sunt chiar instructive si explicate pe intelesul tuturor si in plus, se vede ca ai experienta in depanare. Mult succes!
Thanks for the tutorial, like it. Question though about the cleaning tablet mechanism: how does that work? because my tablets slide in en remain there, they're not being cycled in the cleaning process ... any knowledge on the cause or issue ?
You cat sounds like is a bengal cat! 😃 thanks for the great tutorial, suggestion, maybe next time you can fast forward when you unscrew / vacuum… just in the beginning rest of the video is amazing thanks bro 😊
After throughly cleaning, I couldn't remember where to fix black screw and where to fix stainless steel screws bcoz they are almost same in size. Does it matter ?
Hi. You have online one stainles steel screen and that one is the one holding the piston and is a different size. Others are the same. There are 4 silver ones holding the front mask
Thanks for the video! What’s your opinion about the “expensive” cleaning tablets you have to put in the top, under the steam part every time you clean the machine? In my opinion if I use a liquid coffee machine cleaner, which you fill the water reservoir with, should be enough. Im curious about your opinion :)
I just cleaned my unit with the tablet and it stopped working straight after! Didn’t even finish the rinse part of the programme properly. Then found loads of water had been leaking out the bottom! Not just from the drip tray but from one of the feet and also another area 😭 looks like I need to try similar to this vid or pay someone 130sgd to fix it 😖 Had it for 7years tho so it’s had a decent run
Hi Adrian! Very uselful video! I followed the steps and now I'm at the point where I have to put it back together. Where does the spring go? Do I have to attach it somewhere or not? Thanks a lot!
Daca toate 4 ledurile clipesc si aparatul nu mai ia comenzile,ce ar putea avea!?Mentionez ca l am desfacut tot si l am curatat tot!Thx! E modelul din clip
Salut. Dacă toate ledurile clipesc înseamnă Operation Mallfunction. Poate fi foarte multe cauze cea mai gravă gînd placa de baza și cea mai simpla find senzorul de temperatura de pe boiler.
@@benassy69multumesc pt raspunsul promt, eu l am desfacut tot inclusiv motorasul cu distribuitorul de apa,in prima faza dadea apa incontinuu in tavita de jos apoi l am desfacut iar ,motorasul merge vreun minut fara sa se apreasca si se aprind ledurile,dar daca mai ai vreo idee ,o poti posta aici!
Just… why do they put 30 sec adverts in your video 😂 when I’m watching and cleaning the coffee machine… I’m not interested in car adverts at all, hahaha
Really do I need to do this every year by myself, and with my own hands? That’s what Krups says? Sounds like bad fairytale with not really good ending 😢😂
Всё очень просто, промойте все узлы капучинатора а особенно белую форсунку с резинкой. Снимите аккуратно резинку с форсунки и промойте её под горячей водой, а затем я делаю так. Набираю в рот воды и через форсунку с силой проливаю эту воду, там очень маленькое отверстие и если через отверстие льётся струйка воды то значит форсунка промыта, а если не льется то конечно же молоко не будет пеной. Если у вас там сильно забито молоком то на две минуты в кипяток в кастрюльке чтобы эта пробка ушла и потом опять промойте сами через рот с водой. Как только тонкая струйка будет хорошо литься то пена 100% гарантирована. Я после каждого утреннего кофе с вкусной пенкой мою все узлы и обязательно белую форсунку с резинко и Вам советую!!!
Finally someone who knows how to remove the upper "cup tray" / steam part w/o tools 👍🏼
Thank you. It only took 10 years before on of us Krupsies dit a real good maintenance upload.
Thanks! Very informative! Trying to clean my Krups Evidence because it’s stuck in rinsing cycle and service costs 250 Euro
Thank you bro.
Did it work? I have the same problem
Thank you! Will follow this video during the weekend to clean my Krups :) I suspect some pipe is blocked because it is leaking coffee. Was already considering buying a new espresso machine. But luckily found this video.
Thanks, this has helped me a lot. Only re assembly of the spring was a bit clear for me.i now have a new piston and better coffee again.
Thanks for the upload! Helped me unclog the grinder and clean the whole system 🙂
Adrian can you please show how that little spring is attached to clean the coffee track?
My machine is stuck in cleaning/rinsing ycle and water/coffee comes out of the bottom! Is this deep cleaning worth a go, or is it time to retire the thing?! Had it 7 years and its had a good run!
Another excellent video, thank You!
Just a question. Some sellers offer a Krups repair kit with silicone grease included, do you have any thoughts on where should that go and/or how often? Many thanks!
Haven't done this ever with mine.. it has over 4 years of daily use now.. I need to do it, wonder what I'll find inside lol.
Thanks for sharing!
Foarte tare filmarea, multumesc, maine fac curat la dozator. Sunt curios ce model este aspiratorul tau, cel pe care il folosesti
05:00 That screw can be removed by using an 2,5 mm Allen key ...it fit perfectly.
Edit: 07:54 the screw in the front upper-left side is fake, it doesn't hold nothing. 😁
Hi, our machine keeps failing to put the residue in the designated compartment. Only like 60% gets there, the rest goes everywhere in the machine. Any idea how to fix it? I already dis-an reassembled the whole thing a couple of times but no luck yet. Thanks for the video btw!
How do i clean the water tank tho? Really hard to get rid off the sediment
Thank you so much! I fixed my machine. There was so much coffee underneath the piston, it couldn’t move anymore
Sa-ti dea Dumnezeu sanatate! foarte util!
Multumesc!
I cleaned as instructed but did not change the seals. My espresso result is diluted, not very dark. Towards the end of the pour the fluid is clear. Any suggestions?
Thank you, Adrian. Very nice and useful video.
Unfortunately, I have same problem like @krisssy7150 with the spring. I don't know where the free end of this spring is fixed. One end is attached on the black plastic part but the other end?
I suppose that this is my problem because after cleaning and reassembling when I try to make first coffees where very weak and I found a lot of ground coffee in the tray, right side.
Salut Adrian
Dupa ce am postat, am vazut mai multe fimulete si am constatat ca de fapt exista cel putin 2 variante de arc la piston, una are arcul in forma de U iar in cealalta arcul are capatul lasat liber. La mine este ultima varianta. In concluzie problema mea cu cafeaua care in loc sa intre in pahar este deviata in tavita nu are de-a face cu arcul pistonului. Ai vreun sfat pentru mine?
Salut. Modelul cu arcul gros de diametru mare este EA 87. Dar ajuta-ma să înțeleg după ce ai făcut o curățare a aparatului a apărut problema că , cafeaua e mai slabă și a apărut cafea măcinată in partea dreapta a tăviței ?
@@benassy69 Salut Adrian. Da, problema a aparut dupa ce am desfacut espressorul si l-am curatat. Intre timp m-am lamurit cum este cu arcul la modelul acesta: este normal sa fie liber dinspre rasnita. L-am desfacut din nou, am mai facut o curatare cu pastila si o decalcifiere cu "praf" de la Krups (dizolvat in rezervorul cu apa). Dupa asta si mai multe limpeziri am scapat si de led-urile aprinse si nu am mai gasit cafea in tavita, cel putin dupa 3 cafele facute. Nu am nicio explicatie ce s-a intamplat, dar e bine!
Multumesc ca-ti faci timp sa-i ajuti pe altii. Spre deosebire de alte fimulete, ale tale sunt chiar instructive si explicate pe intelesul tuturor si in plus, se vede ca ai experienta in depanare. Mult succes!
Very good video and instructions and explanations
Thanks for the tutorial, like it.
Question though about the cleaning tablet mechanism: how does that work? because my tablets slide in en remain there, they're not being cycled in the cleaning process ... any knowledge on the cause or issue ?
Happens to mine too, just push it down with the backside of a theespoon
Tengo 1 duda nose si ah escuchado como calibrar la krups para tanto como expresso lungo o americano para tener un buen café y no sea solo monótono
You cat sounds like is a bengal cat! 😃 thanks for the great tutorial, suggestion, maybe next time you can fast forward when you unscrew / vacuum… just in the beginning rest of the video is amazing thanks bro 😊
Thanks! Very useful video. 👍
After throughly cleaning, I couldn't remember where to fix black screw and where to fix stainless steel screws bcoz they are almost same in size. Does it matter ?
Hi. You have online one stainles steel screen and that one is the one holding the piston and is a different size. Others are the same. There are 4 silver ones holding the front mask
Thank You. Much appriciated
Thanks for the video! What’s your opinion about the “expensive” cleaning tablets you have to put in the top, under the steam part every time you clean the machine? In my opinion if I use a liquid coffee machine cleaner, which you fill the water reservoir with, should be enough. Im curious about your opinion :)
I just bought 10 for 15 euro today.
I just cleaned my unit with the tablet and it stopped working straight after! Didn’t even finish the rinse part of the programme properly. Then found loads of water had been leaking out the bottom! Not just from the drip tray but from one of the feet and also another area 😭 looks like I need to try similar to this vid or pay someone 130sgd to fix it 😖 Had it for 7years tho so it’s had a decent run
The distributor got stuck
Just had the same problem. It’s just a 7€ O ring you need to replace. But to do so you have to take apart the whole unit
Hi Adrian! Very uselful video! I followed the steps and now I'm at the point where I have to put it back together. Where does the spring go? Do I have to attach it somewhere or not? Thanks a lot!
The spring has to be attached on the white piston
@@benassy69 I see that the black plastic part goes onnto the piston but the other part of the spring? Do I need to attachbit somewhere? Thanks! :)
Both ends of the spring need to attache on the same wall on the black plastic part. The spring should look like a U
Thanks!
Merci pour cette vidéo. Un tuyau bouché 😂 et de la crasse Tout marche impec
Thank you very much, useful video 👍
Thank you Adrian 🧽☕
Thank you !
Daca toate 4 ledurile clipesc si aparatul nu mai ia comenzile,ce ar putea avea!?Mentionez ca l am desfacut tot si l am curatat tot!Thx! E modelul din clip
Salut. Dacă toate ledurile clipesc înseamnă Operation Mallfunction. Poate fi foarte multe cauze cea mai gravă gînd placa de baza și cea mai simpla find senzorul de temperatura de pe boiler.
@@benassy69multumesc pt raspunsul promt, eu l am desfacut tot inclusiv motorasul cu distribuitorul de apa,in prima faza dadea apa incontinuu in tavita de jos apoi l am desfacut iar ,motorasul merge vreun minut fara sa se apreasca si se aprind ledurile,dar daca mai ai vreo idee ,o poti posta aici!
Sigur ai conectat toate mufele corect cum au fost?
@@benassy69 da,sigur sigur
شكرا ❤
Didn't see you refitting filter
This is waaay beyond my competence level. Guess I'll stick with cleaning tablets for a while :P
Top but you forgot to unmount your grinder to cleanup!
Nice 👍
Thanks ✌
Just… why do they put 30 sec adverts in your video 😂 when I’m watching and cleaning the coffee machine… I’m not interested in car adverts at all, hahaha
Sorry about that. RUclips's policy. Personally I opted for RUclips premium since years and I never see adverts. Best decision ever.
No worries! I understand the advert policy etc. Thanks for the video again, it helped me a lot 👍🏼
Really do I need to do this every year by myself, and with my own hands? That’s what Krups says? Sounds like bad fairytale with not really good ending 😢😂
Всё очень просто, промойте все узлы капучинатора а особенно белую форсунку с резинкой. Снимите аккуратно резинку с форсунки и промойте её под горячей водой, а затем я делаю так. Набираю в рот воды и через форсунку с силой проливаю эту воду, там очень маленькое отверстие и если через отверстие льётся струйка воды то значит форсунка промыта, а если не льется то конечно же молоко не будет пеной. Если у вас там сильно забито молоком то на две минуты в кипяток в кастрюльке чтобы эта пробка ушла и потом опять промойте сами через рот с водой. Как только тонкая струйка будет хорошо литься то пена 100% гарантирована. Я после каждого утреннего кофе с вкусной пенкой мою все узлы и обязательно белую форсунку с резинко и Вам советую!!!
Are you posting this on every krups espresso videos?👀