What a really excellent tutorial you have made. I looked at lots and yours is by far the best. Thank you very much for all the time you have saved me 😊
Saludos! Gracias por un review tan detallado, ¡me han encantado las pruebas en interior! He comprado este repetidor para un jardín y cámaras, de modo que la señal tendrá que atravesar más de una pared, y este vídeo me ha dado esperanza 🙂
100Mbps would be max theoretically, but more or less 80 to 100 if you have good internet connection.. and speed might vary specially for the 2.4ghz network if your area is too crowded for 2.4ghz wireless.
@@JKChavez I have a 300 megabytes fiber optic connection with low latency (-15 dbm excellent) and with this equipment I achieve these speeds. 2.4 G = 30 to 35 Mbytes 5.0 G = 90 to 95 Mbytes At my house the bands (2.4G) are saturated but not to the point of slowing down so much. I think it is a firmware problem. I am looking into updating it... Maybe it's just a low-end device. And the other problem I see is that in repeater mode (without cable) it disconnects when there is a lot of traffic. And this is a problem for me because of the wifi cameras in my home. Thanks for replying.
hi sir, have tried it again recently for 3 days naka on naman sya 24x7 witrh 3 devices connected d naman nag kaka issue on my end, gusto ko sana replicated ung current issue mo..
What a really excellent tutorial you have made. I looked at lots and yours is by far the best. Thank you very much for all the time you have saved me 😊
thank you so much..
Saludos! Gracias por un review tan detallado, ¡me han encantado las pruebas en interior!
He comprado este repetidor para un jardín y cámaras, de modo que la señal tendrá que atravesar más de una pared, y este vídeo me ha dado esperanza 🙂
What is the best camera to connect 2.4GHz or 5GHz?
Two port is cat 5e ??
Cause my router have rj45 port
excelente ;)
Maganda ba kahit may wall penetration? Lalo na kung concrete
Unfortunately hindi sya maganda for wall penetration, strength talaga nya is open area long range
@@peterjohnsagal8015 try mo ruijie ew1200g AP mode mo
@@JKChavez parang tp link lang pala.. balak.q kasi palitan tong eap110 ko mahina sa wall penetration.. thanks sa info
@@why-r8v problema kasi nyan hindi ya pang outdoor
Hallo po St, isa din ako na namomoblem ng interne(mt.province, nort lozon)sonuboksn ko po anh nasa video, ayaw parin pls help, thanks, God bless
Nabitaw sya kada 3 minutes, ginagamit ko sa vendo, any solution or suggestions?
both sir for 2.4ghz and 5ghz?
Ilang metro ang abot nang range nito sir? Hm?
2.4G is too low...is the same for me.. is normal?
100Mbps would be max theoretically, but more or less 80 to 100 if you have good internet connection.. and speed might vary specially for the 2.4ghz network if your area is too crowded for 2.4ghz wireless.
@@JKChavez I have a 300 megabytes fiber optic connection with low latency (-15 dbm excellent) and with this equipment I achieve these speeds.
2.4 G = 30 to 35 Mbytes
5.0 G = 90 to 95 Mbytes
At my house the bands (2.4G) are saturated but not to the point of slowing down so much. I think it is a firmware problem. I am looking into updating it...
Maybe it's just a low-end device. And the other problem I see is that in repeater mode (without cable) it disconnects when there is a lot of traffic. And this is a problem for me because of the wifi cameras in my home.
Thanks for replying.
Pwede po ba sim as isp?
hi, pwede po ung mga simbased modem as long meron silang lan cable to connect to this wavlink
2.4Ghz lang speed test mo sir?
Inside the house sir 2.4 sir, tried 5ghz on roofdeck and ground floor pero negative for indoor.. for outdoor 5ghz talaga ung highlight ng test
@@JKChavez ok sir salamat
pansin ko sa wavlink ac1200 laging nawawala signal
hi sir, have tried it again recently for 3 days naka on naman sya 24x7 witrh 3 devices connected d naman nag kaka issue on my end, gusto ko sana replicated ung current issue mo..
Ilang user kaya nya sir?
Not sure with the max user, pero have tried 7 units wala naman issue po..
@@JKChavez ayy wala nga palang vlan yan sir no