Big up Rowland if i had a car you would be my go to mechanic. Love that Dyno Shootout contest, what would be nice if you upgrade the data chart of the contest, to a digital display on a screen. The knowledge on the mechanic talk, you could sell ice to a Eskimo, so convincing and sure, it takes a special person like yourself who is passionate about your skills/craft to really achieve these innovate ideas in the mechanic world. Asafa there should be a Lets Go to Rowland segment when you and him have the time, like these random videos to spread some of the mechanic knowledge, great video....
Sub 10 a long time mi a tell you fi wrap the black series inna red you nuh. From dem long time deh yu ask, that was my suggestion. Once again, Roland a the General when it comes on to the automotive ting. I would seriously suggest that he patent his things just to be on the safe side. I throughly enjoyed this vlog and i am looking forward to the dyno shoot out.
Not really, is just research that's been opened for all on different vehicle platforms. Nothing new about slapping turbos on anything. Everything engine can be turboed
For the column mounted shifters. The logic is that you always know which paddle shifter is up and which is down, because it doesn't move. The ones on steering can catch you out if the wheel is at a degree where the paddle shifters are on the opposite side and drivers might accidentally shift up thinking they're shifting down. With the steering mounted, they're often times having to look at the steering wheel to make sure they're pulling the right shifter. But the wheel mounted shifters keep your hands at 9 and 3, so you don't have to take your hands off the wheel for most situations.
No he is using only exhaust from 3 cylinder to spool the turbo. If he didn't have the space issue he could have been using all 6 cylinder exhaust to spool the turbo. He isn't damaging half the engine, just making less power by using only half.
@@onaweekend5138 have you ever turbo a car before ? Do you understand the relationship between cylinder temperature and back pressure? Do you even understand engine load ? How are you gonna get accurate lambda value so the ECU can make corrections? The cylinder bank with the turbo gonna run extremely hot which gonna cause detonation. How can y'all not see how much of a stupid idea this is ? Is it due to lack of knowledge?
I don't think people understand whats going on here, the turbo isn't supplying boost to half the engine its just that only exhaust gasses from only three cylinders is being used to spool up the turbo
Huh? Its a single throttle body not dual so the turbo outlet is going to the single throttle body so both cylinder intake sides are getting air force induction by 3 cylinder exhaust bank instead of 6 that's how it works so regardless both heads are getting air but its being produce by half a cylinder
This is for roland. I find that the 2010 mark x has alot of space where the bumper itself sits. Me n my friends sit and watch and just wonder. But then u get factors like the intercooler where that would be its place. But i find they have space u just gotta.be.modest
Bwoy i only fix car mf like can't do those things bro that is some good stuff Jamaicans we the best 💯 i wonder how much my 2017 is350 would make with boost bc it is 306hp now natural
Definitely didn’t have to pull the front end off the car to change the thermostat. Could have easily put it on a lift and get it from underneath 30-45min job tops!
Mark x are govern from factory,180km in 4 gear,and still a two more gear leave,so it dies dwn.thats why some ppl Seh oh mark x fast tek off,then speed cut,them need to do research before talking.remove the govern sensor ect,and change the factory 180km
Will not wear more, please note that he only use 1 bank to spool/spin the turbo to produce more air that will then send to the intake molifold that is equally used by both side of the V6 engine.
Precisely that’s what gonna happen also you gonna have differential afr from the two banks and let’s not forget turbo back pressure. Everybody who thinks this is genius clearly knows nothing about engine building or timing. This motor not gonna last
I'm sure it could be done, but remember exhaust gas is used to spool the turbo and if 3 cylinders can do it sufficiently you don't have an issue. As the boost is then sent through the intake manifold and all 6 cylinders get that.
Asafa the bread I need a big board he needs a computer and a big screen he needs a 75" to 85" screen on the wall yes I know that you all are in 🇯🇲 but ting has gone 🌐 wide do tings international now so tidy up the ting clean up the garage I make it more international standards🙏🏿up 🇱🇨🇲🇸🇬🇧
There is no such thing as a procharger a 2024 wi inna now is a centrifugal supercharger it name the brand a procharger n dem nav nuh kit fi it u eva see 1? No a hks n rotrex kit make
@@truckingjamaicans5045 bro stop tagging me if you don't have common sense I was referring to have back pressure on one side of the engine gonna have its negative effects
@fastshiftauto8941 yuh talk pure nonsense stick to bmw n leave toyota alone n yes turbo cars have back pressure stick to an engine n car u know things about nuh body nah tag it's a simple reply learn how youtube works or go sym n done
U can actually high compression only needa high gas quality and proper tuning it has ntn to do with what turbo ,roland 8.6 second car is 12:1 on the skyline and it has over 1000hp and 2gr is not 12:5 @@Madmax-cy9qx
Rate how Rowland passionate bout him work, rare work ethic on the island Bless up💯💯
Am always dialed in when Roland make appearances I just love how much he loves it
I get fired up and want go get a Toyota
Roland is really a mad scientist.
The general put on the hat welcome to the war Chambers 😂😂
😂😂 c d boss a try fix him glasses n him nuh hve on any
Roland's Elite Performance Garage in Linstead St. Catherine, is definitely the best place for your automobiles 💯%❤❤ thanks Asafa Sub 10 King 👑
Roland turn the bimma inna beast, very passionate about his work. Respect
We need a twin turbo mark x
Interesting. Always learn when you go Roland enuh.
Mark X yah tuff🔥🔥🔥
Welcome to asafa vlog 🤘🏿,Blessings Saturday 🙏🏿 movement
Big up
I thought you didn't own the red gt nuh more?
Big up Rowland if i had a car you would be my go to mechanic. Love that Dyno Shootout contest, what would be nice if you upgrade the data chart of the contest, to a digital display on a screen. The knowledge on the mechanic talk, you could sell ice to a Eskimo, so convincing and sure, it takes a special person like yourself who is passionate about your skills/craft to really achieve these innovate ideas in the mechanic world. Asafa there should be a Lets Go to Rowland segment when you and him have the time, like these random videos to spread some of the mechanic knowledge, great video....
Sub 10 a long time mi a tell you fi wrap the black series inna red you nuh. From dem long time deh yu ask, that was my suggestion. Once again, Roland a the General when it comes on to the automotive ting. I would seriously suggest that he patent his things just to be on the safe side. I throughly enjoyed this vlog and i am looking forward to the dyno shoot out.
Blessing asafa sub10cars wow Roland know his stuff he can teach a class
Roland is really knowledgeable
Not really, is just research that's been opened for all on different vehicle platforms. Nothing new about slapping turbos on anything. Everything engine can be turboed
But in general he is very knowledgeable about cars@@jamaicanyute8441
@@jamaicanyute8441this is very stupid this engine not gonna last long just like the rest of them he turboed
@@jamaicanyute8441this is very stupid this engine not gonna last long just like the rest of them he turboed
@fastshiftauto8941 why you think it's not gonna last?
You needed create class for young people who need to learn about mechanical engineering
I love this Roland dude man.........
Hey pow, that thermostat conversation in that car always a come up. 😅
Me feel Roland know more about car than the person who built it
Was thinking about the fuse box and battery relocate only to hear him say it. That will be interesting.
For the column mounted shifters.
The logic is that you always know which paddle shifter is up and which is down, because it doesn't move. The ones on steering can catch you out if the wheel is at a degree where the paddle shifters are on the opposite side and drivers might accidentally shift up thinking they're shifting down. With the steering mounted, they're often times having to look at the steering wheel to make sure they're pulling the right shifter.
But the wheel mounted shifters keep your hands at 9 and 3, so you don't have to take your hands off the wheel for most situations.
The red Benz is fully sexy!
Big up asafa with some very interesting vlogs
Damm bro is a genius he figure out how to just damage half the engine 😂
No he is using only exhaust from 3 cylinder to spool the turbo. If he didn't have the space issue he could have been using all 6 cylinder exhaust to spool the turbo. He isn't damaging half the engine, just making less power by using only half.
@@onaweekend5138 have you ever turbo a car before ? Do you understand the relationship between cylinder temperature and back pressure? Do you even understand engine load ? How are you gonna get accurate lambda value so the ECU can make corrections? The cylinder bank with the turbo gonna run extremely hot which gonna cause detonation. How can y'all not see how much of a stupid idea this is ? Is it due to lack of knowledge?
@@onaweekend5138 explain the logics of how this won’t ruin the motor
Interesting and informative 🇯🇲 💯
Never hear of this one bank turbo set up , I know of the two bank combination, nice video though, big up uself
Mi trust this set up. But who am no mechanic
Now this is a much better video. Keep up the improvement on your videos
Am all about toyota mark x mi love ❤️ this bless up
I don't think people understand whats going on here, the turbo isn't supplying boost to half the engine its just that only exhaust gasses from only three cylinders is being used to spool up the turbo
Huh? Its a single throttle body not dual so the turbo outlet is going to the single throttle body so both cylinder intake sides are getting air force induction by 3 cylinder exhaust bank instead of 6 that's how it works so regardless both heads are getting air but its being produce by half a cylinder
@infinitibossauto exactly what i am trying to say, some people think only three cylinders are getting boost
@infinitibossauto can't wait to see the infiniti again bro👍
Man I was just about to make the same comment and you beat me to it
If me was the mark x owner I would be glad with that setup as long as it’s reliable and safe cause a mainly turbo noise me wudda want
Rate Roland cah sedway suh me love my music 💯
The one bank turbo reduce lag
asafa looks nervous poor thing 🇯🇲
This is for roland. I find that the 2010 mark x has alot of space where the bumper itself sits. Me n my friends sit and watch and just wonder. But then u get factors like the intercooler where that would be its place. But i find they have space u just gotta.be.modest
Roland is really smart… I never know that can happens!
Man a push up him glasses all when it nuh on
Bwoy i only fix car mf like can't do those things bro that is some good stuff Jamaicans we the best 💯 i wonder how much my 2017 is350 would make with boost bc it is 306hp now natural
Definitely didn’t have to pull the front end off the car to change the thermostat. Could have easily put it on a lift and get it from underneath 30-45min job tops!
How does he keep the automatic stay locked in a fixed gear when he makes the dyno pulls?
Wish I could've bring a mark x grmn in Trinidad...
1 Roland
Biggg up yourself Sub10 King
We need a 2jz swapped manual mark x please make it the first on the world
600whp w jz slow mi see 600whp lexus 350 run faster wid same amount a power jz old breda find a neda engine a dat alone toyota have which is a shame
bumber coming off. 👀👀 after the drive 28:35 time line💨🧠👀
He said earlier in the video that the owner had hit that side
@Madmax-cy9qx ahh 👍🇯🇲
Sound good Roland 😂😂😂❤🎉
I can contest to loving anything u do n ull be at ur A game each time
That blue BMW was him?!! lol
Would Roland work on a 2012 land Rover ? it not starting engine issue?
Torque ever present
just need a change of ecu and trans and you’re good
Him need to patton that set up
E machine sound good yf
Me can put me foot pon e dyno to eno 😃
dwl.... asafa a drama man yah sah... dont leggo di bar
Need fi turbo mi Rav 4. Roland!!!..u bad u fret!....mi soon fawud !!
I need a ignition coil or the wole distributor for a 96 handa civic sedan
Professor Roland. Roland University
Tell Roland fi do a You Chube channel 😂😂
v6 had one 😊😊 best
i actually have a turbo honda fit , that I might bring to the dyno @16:05...LOL
SAFA ASK ROLAND IF THE 2ZR TRANSMISSION IS LSD?
I want to turbo my honda fit but the pocket nuh ready fi dat yet
Mark x are govern from factory,180km in 4 gear,and still a two more gear leave,so it dies dwn.thats why some ppl Seh oh mark x fast tek off,then speed cut,them need to do research before talking.remove the govern sensor ect,and change the factory 180km
Any internals? All stock? 😮😮😮
So far, all stock
Big up MAX HP
So I have an RC 350 F sport. I want more power but I still want it streetable and usable. Any suggestions
Get a turbokit tundra throttle body the is350 runs 10.9 easily
wouldnt the engine wear more on one side, wouldnt the egt be way hotter on one side
Why would it wear more?
Will not wear more, please note that he only use 1 bank to spool/spin the turbo to produce more air that will then send to the intake molifold that is equally used by both side of the V6 engine.
Precisely that’s what gonna happen also you gonna have differential afr from the two banks and let’s not forget turbo back pressure. Everybody who thinks this is genius clearly knows nothing about engine building or timing. This motor not gonna last
@@lroytipithave you ever tune or built an engine before ?
So you're telling me he couldn't get a good fabricator to route the next side of the exhaust to the same position?
I'm sure it could be done, but remember exhaust gas is used to spool the turbo and if 3 cylinders can do it sufficiently you don't have an issue. As the boost is then sent through the intake manifold and all 6 cylinders get that.
He could but he always try to do as little cutting and modding as possible
People do it but a wul heap a piping
Machinnneeeeee!!!!!!!
Asafa the bread I need a big board he needs a computer and a big screen he needs a 75" to 85" screen on the wall yes I know that you all are in 🇯🇲 but ting has gone 🌐 wide do tings international now so tidy up the ting clean up the garage I make it more international standards🙏🏿up 🇱🇨🇲🇸🇬🇧
Power placement
This Asafa Powell? Didn't know he is a gas-brain, and on YT.
turbo on 3 cylinders only 😭
Ratid mi just a see dis an look how mi coulda forward 😢
Safa MI si yuh a feel di power 😅😂face mek up
All wheel drive?
Nope
Rear wheel
Where is this guy
Mr. Roe
Where a find the live?
Boosting one side of the engine? Hmmmm!
unfortunate dyno position
Need is business number can anyone share it
this make no sense why not go procharger like what the guys with the corvette do even the corvette engine bay is small and compact
All this gonna do is create more stress on the engine for one side only
There is no such thing as a procharger a 2024 wi inna now is a centrifugal supercharger it name the brand a procharger n dem nav nuh kit fi it u eva see 1? No a hks n rotrex kit make
@fastshiftauto8941 wrong it being driven off the crank how is that wearing on one side ? 😂😂😂😂 u just place it were you want it simple
@@truckingjamaicans5045 bro stop tagging me if you don't have common sense I was referring to have back pressure on one side of the engine gonna have its negative effects
@fastshiftauto8941 yuh talk pure nonsense stick to bmw n leave toyota alone n yes turbo cars have back pressure stick to an engine n car u know things about nuh body nah tag it's a simple reply learn how youtube works or go sym n done
proper
Teach people about cars
g80 is rwd and awd
tuff
Hi Roland where are you located and can I have the phone # please and thanks.I like you style and hope fully soon I will get a car done by you.
sheesh
Bad car 🚗
Crash and dead car dat 🚗
Twin turbo it an best believe 500 but to keep it reliable hold it around 430 hp
Cant just slap twin turbos on 12.5 compression ratio
@ no I’m more referring to the full 6 cylinder
@@BLESSED-ODM what do you mean? All 6 cylinders are getting boost
U can actually high compression only needa high gas quality and proper tuning it has ntn to do with what turbo ,roland 8.6 second car is 12:1 on the skyline and it has over 1000hp and 2gr is not 12:5 @@Madmax-cy9qx
@@infinitibossautothat only possible on methanol fuel only you can’t even do that on e85 it will blow to pieces
Mark X 300hp Waste of time
How so?
I agree, I would have built the motor.
Maybe the owner didn’t have the money. Built motor would have been nice though
Just like every bmw wid a 2.0 engine 😂😂😂😂😂 n mercedes junk
@Roland how much is it to over a demio 04