Nice video Stan, great job explaining how to set it up. We will be doing a video soon showing it in action. I just finished making the holder for the diamond. I used to do a lot of form grinding using a dresser like this, CNC hard turning and grinding pretty much took over form grinding. Steve
Thank you for showing us how to use this gadget. I have one that I got a few months ago. I figured it was pretty complicated. You made it easier to comprehend. The center height gauge is my next project.
Thanks Stan. Alot to using a radius tangent dresser properly. I've set mine up and used it twice. I need to get it out and get some time on it so I'll feel more comfortable using it. Thanks for the video, I enjoyed it. Thumbs up
very informative thanks. I recently learned that diamond dimension/size also makes a difference depending on the type of wheel used - would be interested in learning about that as well.
Stan, you told me to get a dresser over a year ago and I did. Thanks for the the great guide on setting it up. I hope you do a video on the tangent function soon.
Respected sir. My name is Rahul (india) I just start up next month grinding shop. I just want to know how to set dresser in redius dresser. Can you send video, to me ,how to check dresser point ,both 30 degree site ,by liver dial gauge . Contact number (whatsapp +91 9967215988)
@@brucegor sir.. Now I don't have any redius dresser. I wilp taken next 15 days. But in my old compony I saw , the operator when set any type of redius that time he check the dresser dimond point zero by lever dial 30 degree left and 30 degree right.when both side 30 degree Dimond point goes zero than he set redius whatever he want.
@@rrr-uh9hk Yuasa featured in this video is the most comprehensive instructional video I have ever seen. My advice to you is to buy a Yuasa or similar wheel dresser and watch this video several times. He goes thru entire process of qualifying fixture and setting diamond for radius work
@@brucegor Sir. Pls send your whtsap number with country code. I will star set up of form grinding workshop. John shipman surface, Sine table, sine dresser, redius wheel dresser and profile projector. If i want any help for any information about form grinding. I will msg you. Thnx for guide me and replying me. +91 9967215988 its my whtsp number.
Great vid Stan! You have a knack for explaining things simply and precisely. I can imagine you'd be a great guy to work for. Keep up the great content.
Thanks a lot Stan very informative video, very helpful I DO APPRECIATE IT. By the way I love the most important part of the video the JD for after work, I got one my self it helps a lot.
Hey Brian, Same as a can of dusting air (Inverted) but it has penetrating oil mixed with it, anything with liquid nitrogen as a propellant will freeze parts.
I also have one of these waiting for me to get my Boyar Schultz into action. I know we were talking about your overhead dresser at the Bash, and I'm guessing this is your preferred method for dressing your wheels? Nice explanation Stan! 👍
Flat work and heavy removal the overhead is wonderful, for finish flat work I dress off the table, for shapes, I use the dressing head. Thanks for stopping by.
Isn't it nice when a problem and a sponsor arrive at the same time. Good explanation setting up the Yuasa.
Hey Stan! Glad those products helped you out. Bar-Z Summer Bash looked like a great time as well!
Sorry you couldn't make it out to the Bash this year, the viewers loved the prizes you sent, thanks a million.
Nice video Stan, great job explaining how to set it up. We will be doing a video soon showing it in action. I just finished making the holder for the diamond. I used to do a lot of form grinding using a dresser like this, CNC hard turning and grinding pretty much took over form grinding.
Steve
Thorough instructions and understandable explanation......THANKS!
Thank you for showing us how to use this gadget.
I have one that I got a few months ago. I figured it was pretty complicated.
You made it easier to comprehend. The center height gauge is my next project.
Thanks Stan. Alot to using a radius tangent dresser properly. I've set mine up and used it twice. I need to get it out and get some time on it so I'll feel more comfortable using it. Thanks for the video, I enjoyed it. Thumbs up
very informative thanks. I recently learned that diamond dimension/size also makes a difference depending on the type of wheel used - would be interested in learning about that as well.
Stan, you told me to get a dresser over a year ago and I did. Thanks for the the great guide on setting it up. I hope you do a video on the tangent function soon.
Damn that beats my J&S all ta hell and gone for surface work. Had my yuasa in a box for yrs collecting dust. Thanks
Respected sir. My name is Rahul (india)
I just start up next month grinding shop.
I just want to know how to set dresser in redius dresser.
Can you send video, to me ,how to check dresser point ,both 30 degree site ,by liver dial gauge .
Contact number (whatsapp +91 9967215988)
@@rrr-uh9hkI am not sure what you are asking Rahul. Do you have a J&S radius dresser also and wish a demonstration video from me?
@@brucegor sir..
Now I don't have any redius dresser. I wilp taken next 15 days. But in my old compony I saw , the operator when set any type of redius that time he check the dresser dimond point zero by lever dial 30 degree left and 30 degree right.when both side 30 degree Dimond point goes zero than he set redius whatever he want.
@@rrr-uh9hk Yuasa featured in this video is the most comprehensive instructional video I have ever seen. My advice to you is to buy a Yuasa or similar wheel dresser and watch this video several times. He goes thru entire process of qualifying fixture and setting diamond for radius work
@@brucegor Sir.
Pls send your whtsap number with country code. I will star set up of form grinding workshop. John shipman surface,
Sine table, sine dresser, redius wheel dresser and profile projector.
If i want any help for any information about form grinding. I will msg you.
Thnx for guide me and replying me.
+91 9967215988 its my whtsp number.
Great vid Stan! You have a knack for explaining things simply and precisely. I can imagine you'd be a great guy to work for. Keep up the great content.
CRC to the rescue! Great explanation Stan, I now understand another shop tools function!
Good run thru Stan.
Great demo. Scheduled maintenance will prevent those pesky tooling freeze ups.
great discussion/demonstration/refresher
Thanks a lot Stan very informative video, very helpful I DO APPRECIATE IT. By the way I love the most important part of the video the JD for after work, I got one my self it helps a lot.
Very timely as I picked one of these up a month ago. I may be missing few parts according to this video. BTW, love your SFH. 😁
Thats my "tenths tapper" :)
Great explanation!👍🏻
Great descriptive video, I´m looking for one also now, even more than before the video 🙂
Great video Stan, enjoyed!
ATB, Robin
Truly Excellent Video, Stan, Thank You So Very Much
Very nice....now I want one even more.... :)
Dad pronounced that "Yowseh" or "You Asseh" depending on his mood.
Good overview on the tool setup. Any idea just how cold that freeze off gets?
Hey Brian,
Same as a can of dusting air (Inverted) but it has penetrating oil mixed with it, anything with liquid nitrogen as a propellant will freeze parts.
That was awesome.
Another great video. I wish you had a little more time to explain the tangent (angle) feature.
Thanks Stan, excellent instruction.
I've got a Boyar-Schultz 612 - what are the hexagonal rods that look like foot pegs sticking-out left and right?
Those are rigging posts to lift the machine, 3 point mount, 2 hex rods + the front center cross feed snout. Machine will pick level and balanced.
Dónde lo venden y cuánto cuesta?
I also have one of these waiting for me to get my Boyar Schultz into action. I know we were talking about your overhead dresser at the Bash, and I'm guessing this is your preferred method for dressing your wheels? Nice explanation Stan! 👍
Flat work and heavy removal the overhead is wonderful, for finish flat work I dress off the table, for shapes, I use the dressing head. Thanks for stopping by.
Just subscribed. How have I not run across you before?
Thanks Stan,
And all this time I've been adjusting the diamond point ??
At about 3:00 is that bottle of JD cutting oil or some other lubricant?
Is that your neighbor mowing his lawn? Funny how everything is quiet until you start recording...
They have radar, I dont know how they know, they just do!