Milling 2x4 lumber on the sawmill
HTML-код
- Опубликовано: 6 сен 2024
- Time to fire up the Norwood LM29 again to mill 2x4 lumber for our chicken hoop house. We took our first log from our felled tree from the previous week and put it on the sawmill only to realize it had a bad curve in it. We had to cut it short and fashion an extra guide to be able to secure it on the mill.
Be sure to subscribe to our channel and support our efforts by giving us a thumbs up.
Follow us on facebook at / redtoolhousefarm
On Instagram at
/ redtoolhouse
Visit our website and be sure to sign up for our email newsletter so you will be up to speed on what goes on at our homestead. redtoolhouse.co...
If you would like to help Red Tool House Homestead maintain the expenses of running this channel, consider using our Amazon Affiliates link when you shop on Amazon.
Amazon Link: goo.gl/4fiaxX
On a homestead with lots of good trees, it certainly pays off to have your own mill. It is nice to be able to mill whatever you need instead of having to go pay money for it at a store... Love the series Troy.
Thanks, Harold. Yes, If I was buying logs, it would take a lot to justify the expense.
what I do in the case like this I mill the log as if I cut it off but dont cut it you will get some with bad ends but in the middle you will get full length boards
Throw down a tarp to easily bag the sawdust for the chicken run deep bedding over winter. If you feed corn the pigs will turn the compost for you in the spring.
I agree. I jimmied a 5 gallon bucket with some straps at the exhaust and then I dump it in big contractor bags. Makes great bedding in winter too.
I came here to see a real 2”x4”.
We only have imitations that are are 1.5x3.5
Loved the video thanks Troy!
Great job explaining.👍🏼
I felt the "AAHHH CORNER OF THE MILL!!!" In my soul.
You sure could use a grapple on that tractor. Makes picking up and placing logs very easy. Cleaning up brush is almost fun with one too
I had a company approach me about doing a quick attach conversion on my Kioti as a video series. I would also need to add the wet lines which would make that more of a project.
Never even thought a "Common Core Tong Thrower"...possible......LOL !!
Had me worried a couple of times remembering the post at the end of the popular what set to the top of it. Then you took the saw all the way past it. I was almost expecting the blade to run into it. Good one, You fooled me there Troy.
I would never do that!!! (Again)
Yeah I cringed for a second my self.
Great video
If you buy an extra log stop/rest to put in between the 2 you have you wont have to use a sacrificial board. I did and can cut down to just over 4 feet, lots of possibilities. Keep on sawing!
Nice video, as usual! Sure wish I had a lumber mill... just might have to look into getting one. They look extremely useful.
Chris Spurr I think the Norwood is the one to get.
If you have access to logs, they are handy!
They're worth it, you'll get your money back in no time, you can get a good second hand one for between $2,500 to $4,000
Lmao “this has got good idea written all over it” I started laughing so hard when you said that.
We are flush with great ideas around here...
Hi there
Good job
He bud just some FYI for ya. I got my mill put together and was having same problem with the throttle you might be having. Up under the fuel tank there is a nut you can loosen just a little bit to take tension off of throttle. Then I added a little spring on the return and it works like a champ. Keep the videos coming bud.
Yeah, the spring that came with the mill isn't strong enough to return the throttle to idle. I will check that out.
I took a picture of the nut to loosen but I don’t know how to post it. Lol
Hi Troy and Kelly
i wouldnt call those 2x4´s Maybe 1x3 lol. When they dry they will be even smaller than box stores
Why cut the end off ?????? some of the lumber would have been 8 ft now none of it will be.
I’da jumped off that tractor so fast and told him to do it his self so fast it wouldn’t of been funny
So this is a few years old now, there were lots of questions regarding shrinkage. How much dod the lumber shrink? Its my understnding that originally cut to 2 x 4 will shrink to 1.5 x 3.5
Did you ever try the “back to eden” no maintenance garden method in the farm? Looks like with your logging you would have the mulch for it
Yes, we use wood chips all the time!
@@RedToolHouse so cool thinking of getting out of the corporate rate race and getting a small farm.
I liked the part when you super imposed the lines on the log, great information.
Thanks! Wish I could do that when I was milling. Too much thinkin' makes my head hurt.
Anyone tried making log stops out of wood?
Instead of messing up a board for a guide...just use a end peice from the burn pile and a c-clamp ....clamp the peice on the cross frame of the mill...your welcome👍
Hi Troy good job on decision to cut off the crook but you made a common mistake when deciding how to disect the log. Before slabing decide or calculate what the dimensions of your cant needs to be, in order to get what you need from that particular log. Also the biggest error is not allow your kerf waste of each cut your going to lose about an 8th inch that has to be calculated in. This then will allow you to better maximize each log ans also less cuts. In this demo i counted i believe 3 unnecessary cuts maybe more that could have been saved. That adds up on blade longevity.
Why cut the end off ?????? some of the lumber would have been 8 ft now none of it will be.
@@ExploringCabinsandMines there is at least a couple good reasons to cut off a crook in a log. True you might get a couple long boards maybe but the extra time spent getting that extra 2 board feet of lumber often will cost more than the extra value you would get out of it. In Troy's case he has access to all the free logs he needs for his own use. He doesn't have to worry about extracting every marketable inch of wood. Time and wear on the mill is more of a concern than a extra board foot of lumber.
it took extra time to get the tractor position the log and cut it a 3rd time, he could have left it alone and just started cutting. think about it.
@@ExploringCabinsandMines you obviously know very little about milling you just don't start milling a log just Willy nilly however it lands on the mill. Logs are neither straight nor perfect round and have to be properly positioned to get the cuts desired. Plus like I said he has free access to a ample log supply Troy doesn't have to make every cut in a conservative way. Plus he doesn't waste the flitches as he chips a lot of it for mulch and some goes for firewood.
@@kenjett2434 Interesting, what else fo I know or not know ?
You're saying it's absolutely impossible to mill a log with a crook in the end ? You're a moron.
LMFAO who said willy nilly ? you did.
I have to ask. Isnt the whole reason that construction grade lumber is smaller than the name because of shrinking when drying? So why do you cut it to actual dimentions?
No, they plane and sand it
That looks like an expensive machine
Good thing she dropped the log stop down cuz your not cutting that far.
Those sacrificial poplar strips could still be used for tons of things, so they're not necessarily wasted. I recall you also do woodworking in your shop, so there's a lot of potential there, too.
But I wonder why you can't just get another log dog and put between those 2, so you have the first 2 about 4' apart for those rare instances you might want to mill a shorter piece of log.
Yeah, I mentioned that as an option. Probably will invest in one at some point. It isn't a huge expense. The poplar boards will be used as rick boards when I mill the big red oak I have to mill.
shrinkage? after drying out the 1.5x3.5 will be even smaller right? HOW MUCH BIGGER SHOULD ONE CUT TO ALLOW FOR SHRINKAGE GETTING CLOSE TO BOX STORE? ADDITIONALLY, WOULD ONE CUT TO SIZE AFTER BOARDS DRY OUT BY AT LEAST LOSING HALF MOISTURE CONTENT OR MORE?
Well, we have used ~5% shrinkage on pine. So to get 2"*4" (50.8*101.4 in metric) we cut ~ 54*107. Sometimes a little over, sometimes a little under but we aim for 2"*4" when it's dry. That is in mm (metric), I think that it's close to some of the quarter-scales?
You should do a comedian standup.
I would of thought at least every other bunk would have clamps.....or at least moveable ones.
I can move mine around and adjust the bunks
What brand do you have?
Well......it started as a thomas built but my dad rebuilt and remodeled alot of it and extendaed it to 18ft. And mounted it to a large trailer with top awning and a log deck.
But as a thomas built each bunk had its own backstop and clamps.
I’m in eastern Kentucky… will he buying one of these within the next month… plan to mill enough tulip poplar aka yellow poplar from our 50 acre farm to build a 1900 square foot house… very informative video, thanks.
You should never walk under a bucket or boom very unsafe if that came down and hurt you
Yvo
This title should say how not to mill 2x4
Amazingly they came out a 2x4 shape. Crazy!
Liked for the cringe