Effortless macOS VM Installation with New Macinabox - Ventura & Sonoma Support
HTML-код
- Опубликовано: 7 фев 2025
- In this tutorial, I walk you through the process of installing macOS (from High Sierra to Sonoma) using the New Macinbox, on an Unraid server. This method makes it incredibly easy to select and install any version of macOS that you need.
⚠️ Important Note: To stay compliant with Apple’s EULA, this Unraid server in the video is running on genuine Apple hardware, which is clearly shown in the video. This ensures that the macOS virtual machines in this video operates within legal boundaries.
Please, if you can and want to support the channel and donate you can do so by Paypal here www.paypal.com... or check my patreon page / spaceinvaderone
----------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------
Need to buy something from amazon? Then please use my link to help the channel :)
USA - amzn.to/3kCikfU
UK - amzn.to/2UsYb1f
Sas cables amzn.to/49M0BgI
Mini SAS 26-Pin SFF-8088 Male to Mini SAS 26-Pin SFF-8088
amzn.to/2V4x9kT USA
amzn.to/3xfkxEl UK
HighPoint RocketStor 6414S amzn.to/3fiXv9s
----------------------------------------------------------------------------------------------------------------
Need a VPN?
PIA is popular with Unraid users as its easy to setup with various vpn download containers - www.privateint...
Torguard is also an excellent VPN again with both openvpn and wireguard protocls supported.
Get 50% off for life using code spaceinvaderone torguard.net/a...
----------------------------------------------------------------------------------------------------------------
Need a cheap windows 10 licence for around $10
consogame.com/...
---------------------------------------------------------------------------------------------------------------- 
Наука
"Run on Apple hardware" My PC box physically sits on top of my old macmini, so technically everything runs on Apple hardware.
Thanks!
I have used your previous version a couple of times on two different UnRaid boxes.
Now I have used this version a couple of times. The issue I am running into… Ventura system report shows 1 core when the default configuration is for 2.
Also it would really help if you could tell us how to completely remove every bit of of a VM on UnRaid. I have one UnRaid box that shows one that can’t be removed. I have checked appdata, domains, and isos, and nothing is there, but yet it shows under VMs.
I appreciate your knowledge and work!
Ed, I bought a used 2018 Mac Mini. Going to push the ram to 64G and use it for UnRaid. Since UnRaid boots and runs from USB, can you point to what you had to do to make that happen permanently. I have a spare Pro license USB. Currently has 6.12 on it, so I will update it to 7.0.0 beta 2. This will remove the array requirement. The SSD in the Mac is only 128G, but I have some Nvme usb drives or I can get a ThunderBolt gen 3 drive(s).
Awesome guide as always :) br from Austria! next step is to try to get my 1050ti passed through there :) just a sidenote : Without you Unraid wouldnt be as accessable to a load of people as it is :) thanks for all ur efforts :)
Thank you for all your help. Your guides help me a lot in my Unraid journey this year.
You're very welcome, I am glad you enjoy the videos. Thankyou so much for the super thanks :)
Thanks! Excited to play around with this.
Your welcome. Thankyou so much for the super thanks :)
Great video! I have had it on my list for a while to set up a MacOS VM on my Unraid host. This is terrific. I have upgraded iMacs with OpenCore, along with Mac Pro towers. I own a LOT of apple hardware, some of which I have running for various tasks. This is a terrific project. Thank you!
Funny, i was checking the old video yesterday. Time to install a new vm.
Brilliant video, thanks for all the super level of detail and explanations. Watched it side by side with doing the upgrade / replacement, made everything easy to understand. Awesome!!!
I am SO excited for this! Thank you for all you do!
You are very welcome :)
You Sir are Awesome!!
Marry Christmas
Great video Ed. Would love if you could do a quick Nextcloud revisit to help us plonkers who are not sure how to safely upgrade since the container update process changed a number of months back. I've found it impossible to get a clear, straightforward answer on what needs to be done. Thanks!
I will be making a new Nextcloud video but I will be basing it I think on the Nextcloud Alll in One container as after recently speaking to Josh a co founder of Nextcloud he has his set this way and it is their preferred method today. Not sure when the video will be maybe next month?
Great video as always Ed! Thanks for sharing it with us!💖👍😎JP
Thankyou. Glad that you enjoyed it :)
cleverly made Ed...thanks
@SpaceinvaderOne, your videos have meant a great deal, increasing my knowledge! With your help and the help of others in the chat, I've made some headway, but I am stuck at the disk utility screen where I only see one about 3Gb drive. I am on UnRaid 6.12.13, and I've tried deleting the VM and rerunning macinabox several times. I have also deleted the docker plus template and ensured everything was deleted from the AppData folder. When I did that, I could see the 100G mac-disk.img file in the domains folder, but I still can only see one 3.22Gb drive in the disk utility that only has 917Mb free.
Did you fix it yet? I got the same problem and nothing seems to fix it
Brilliant work!
edit: I was able to make changes after upgrading to 6.12.13, but i think it was probably the reboot that solved the issue. So anyone else having the same issue, start there.
The only way I can get it to load is to use the default settings.. changing anything like cpus or ram gives me "Guest has not initialized the display (yet)." have removed the VM (without disk) several times, manually removed nvram files. tried different cpuargs. nothing works unless i set it back to default. and run last cpuarg option.. im on 6.12.8 with an i7 10th gen. hopefully someone figures out a workaround as ive seen im not the only one.
Great content as always!!
Thank you!
Your welcome :)
@@SpaceinvaderOne Previously ran Big Sur, deleted and upgraded to Sonoma without any issues! It is way easier now. Wil we be able to upgrade Sonoma to Sequoia in the OS itself?
For some reason after the VM boots the first time and I get to Disk Utility I can only see one disk, seems like it is the base image, anyway the one that has 2.87 gigs free. No other disks are shown even they are mounted according to VM logs. I only pointed the virtual disk location to SSD only -share, no other changes made to the docker or the vm.
I was experiencing this same issue. I was able to fix it by starting from scratch and instead of the default raw vdisk type to qcow2.
@@MrFlakk Did not fix the issue for me
@@Tombatin Did you fix it yet?
Have you considered doing a frigate unraid install?
the coolest dude in YT :)
Thank you for you macinabox. It freat and easy install VM mac. kiss
Anytime I try to change cpu cores, ram, add a usb, I get “Guest has not initialized the display (yet)” It only works when I'm at the base 2 cores 4gb of ram.
I had the same problem. Updating from 6.12.10 to 6.12.13 fixed it.
@@colinholmes7180 That worked for me too. Now I just have to figure out why USB is not working.
same here. updated from 6.12.10 to 6.12.13 fixed it for me as well.
Thanks for this. I literally installed Ventura last night on a proxmox box, having failed on unraid previously trying to use the mackinabox installer. This works brilliantly. One question I have is about audio. I use VNC to access the VM, but there is no audio, is there a work around like a Windows VM where you can use a Virtio driver ?
The VM was running fine after first boot, configured it as shown. i powered it off and when i tried to bring it back up its just stuck at the apple logo halfway loaded.
19:58 I’ve followed it all through and getting “Guest has not initialized the display yet” when I start the VM and try to VNC onto it. Any ideas? Can I add my GPU at this point or does it need VNC first? Either way I’m stuck right now
Best to install before adding GPU. If you have an issue “Guest has not initialized the display yet” This happens sometimes on a VM when nvram is not right. Just delete the vm (but choose not to delete the disks) Run macinabox again and it will see the existing disks etc and recreate a new vm with new nvram. Then you should be good
@@SpaceinvaderOne I am also getting stuck on the "“Guest has not initialized the display (yet)” message. I did not add a GPU, and I've tried deleting the VM only several times, as well as with the disks, and nothing has helped. I've also tried Sonoma and Ventura. Thank you for another fantastic video!
@@jlmbkd I had the same problem. Updating from 6.12.10 to 6.12.13 fixed it.
@@colinholmes7180 That did the trick, thank you! I can now get to the Disk Utility, but I'm only seeing one 3.2 GB disk.
@@SpaceinvaderOne, thanks mate! It worked by removing VM (not disks), end run Macinabox again.
Installed Monterey fine on my hp z820 dual xeon box using vnc. When I pass through real gpus (amd 560 or 6600, both which should work), I get the apple logo with a status bar that never moves. It looks like others are having this problem... I also tried it on a dell precision dual xeon box with the same result.
The fact that it works under vnc tells me the cpus and memory are compatible so it either has to be the graphics card or the usb mouse and keyboard I pass through, but I doubt it's those...
Anyone crack this nut yet? I am basically done using windows after the last update, except when absolutely unavoidable.. I use linux for 90+% of stuff, but if I need some proprietary software for content creation I would prefer to use macos.
Can the same method be used to install sequoia?
Excellent video like all your other videos. Quick question, is it okay to login with my apple id so I can get iMessages on it?
I cant get my RX 550 lexa to boot with Catalina with gpu passthrough. it stops at [PCI configuration begin]. With QXL it works with help from Macinabox. Any tips how to make RX 550 at least to boot to mac os? It works fine in windows 10 VM with q35 v.6.2. Unraid 7
After formatting disk it reboots to a 3 icon screen: macOS base system, UEFI shell, Reset NVRAM. I pick macOS but just loops. Thanks
same issue here.
edit: Seems like Sonoma boots, Ventura wont
Same here. Anyone get a fix for this?
how did you intall the unraid in the macmini , i ahe been trying to install it in macmini 2011 without any lock
Been trying about an hour to install sonama but no luck, so changed to ventura and that works, reason why not the latest O/S will not download from template?
I've seen another person have a problem when they named the VM "Sonoma1" and then the install image wouldn't get recognized because it was still named "Sonoma" or something like that. I'm currently installing MacOS Sonoma, with the VM image being "Sonoma" - maybe try that if this is your issue.
@@tomyslo Thanls for reply but i restarted server and tried again and it installed.
I could only get this to work using the default 2 core, 4 gb ram model. Which is pretty darn slow. I've tried a few options listed as in the comments. Used Sonoma and Ventura. If I modify the then run Macinabox again I get ' “Guest has not initialized the display yet” '. No matter what options I try or even if i go back to the default, I get the same message. If I remove the VM only and leave the disk, rerun Macinabox then it works again but only on default. Any ideas on what to try next?
updated from Unraid 6.12.10> 6.12.13. made no difference to Macinabox Vm
Is there a fix for BigSur installing okay but none of the OS's newer work?
Like others, I too am getting the "Guest has not initialized the display (yet)." error. Followed your video 100%. Unraid v6.12.3, on a Ryzen 5700G CPU. Any suggestions? Thanks for the awesome video, as always. :)
Oh something worth noticing perhaps; when running (and thus getting that error), the first core of my cpu which I selected is at 100%. When the VM is off it's idle. All other cores are idle as well (on or off).
I have the same set up, did you get it to work?
I have gotten it to install so far but only when I leave the template after macinabox first sets up the vm. If i make any changes to the cores it will get that message. I am on 6.12.10
Will there be any issue along with Apple license if I install this on a non Apple device?
Shhhh.... if you dont tell, we wont...
Aww man I wish you did the igpu passthrough bit as well. I don't want to use a dedicated gpu because of the power draw and heat.
Trying to install Monterey but the ISO when loaded is Sonoma.
No need to run any opencore SW once booted to MacOS to make any changes? No more SN, EFI, etc? Changes to make it boot directly to MacOS instead of bootloader?
That's still required, because it's still using OpenCore as the bootloader. If you don't want a separate "disk" for the bootloader, you have to copy the EFI contents to your OS drive.
just tried installing but but seems to be frozen on the bootloader. looks like only 1 cpu is being used and is pegged at 100%…pls help :(
Had the same issue. Changed the CPU core count from 5 to 4 just like it was mentioned in the video.
For "Machine" in your VM settings, you have the option of "Q35-9.0". The latest version I have on mine is "Q35-7.2". Are there any instructions on updating the QEMU machine version? I searched UnRAID documents and couldn't find anything.
If I'm not mistaken, you get newer versions when updating Unraid. I'm currently on Unraid 7.0.0-beta.1 and my latest is Q35-8.2. Ed is on Unraid 7.0.0-beta.2 and his latest is Q35-9.0. I don't know of another way to do it but it may be possible.
@@tomyslo That makes sense! Thanks!
thanks! Everything works well except GPU passthrough... I have rx580 and I tried to set same rom bios file as I used in BigSur vm but it's not working... Looks like it get stuck on apple logo after I click on Mac OS drive.
Please help! Thanks!
I get this same thing, stuck with empty progress bar at apple logo
exactly same problem here. and also seems like i got sequoia os instead ventura or sonoma even i didnt selected. my graphics card is also RX580.
i've tried with vbios and without vbios. but nothing is changed
Same here... So far, probably on .plist and qemu args... =/ Tried with RX 6750 XT and with 580SP.... =/
when is unraid 7 fully out?
I dont have an exact date but it will be soon. A few thinks being ironed out at present.
@@SpaceinvaderOne thanks
Would this be updatable through macOS or would I have to update using the unraid dashboard?
I went to configure the VM to use my cache drive I have set exclusively for my VM disk and set the cpu/ram. I clicked update and it never updates and just hangs on updating. Not sure if this is a just me issue or not.
Does iMessage and Handoff work on the VM?
iMessage works, but for handoff to work you need a compatible WiFi and Bluetooth adapter. You can find which ones are compatible on hackintosh forums and websites
@@tomysloiMessage not working for me. Is there more configuration I need to do? Really just spun up this VM for bluebubbles
@@chrisperrywv Hmm, not that I know of. I'm running a Ventura VM for BlueBubbles as well and it's working fine. Then I'm running another Sonoma VM for regular use - everything is working well for me. Sorry I'm not sure how to help you.
@@tomyslothat’s okay. I’m sure I’ll figure it out. I appreciate you getting back to me. It is the whole reason I spin it up 🤣 how has blue bubbles been for you on the VM? We were running it on a 2012 MacBook Pro but the computer was being super unstable and therefore so was BB.
@@chrisperrywv Aa makes sense. For me it's been stable ever since I set it up. I dedicated 2 cores and 4GB of RAM to it and had no problems so far.
Wondering if its possible to pass-through dedicated SSD?
Almost certainly
sure is :)
I figured as much, but what with the half a dozen vdisks a macos vm makes you create, I had doubts...
I'll experiment and see what happens! Ive been running unraid (and defacto following your guides!) since... oh... around 2016ish? Hell, youre the reason I got a threadripper board!
I hope to keep seeing more awesome content!
Oh maybe an XP VM (*I* loathe xp, but my wife... yeah... she loves it. But I refuse to let a bare metal machine on the internet thats running XP...
It is! You can go the `/dev/disk/by-id/...` route, pass-through a whole SATA controller or an NVMe drive. Some disks might not be supported (check Dortania's OpenCore Install Guide) - in that case, you can add kexts.
Would this work on an AMD APU like the 3200G?
FWIW it works on my 1900X threadripper, so I dont think AMD is an issue. I just know the integrated graphics are (would be, Im pretty sure) a no go
@@dusterl1472 thanks, you've saved me lots of time :)
Thanks for the app and tutorial! Does anyone has issue using dedicated GPU in a Rayen system? my 6900XT hangs on apple logo or boot loop; no issue running the same copy of VM through VNC.
Same for me... any solution?
@@OfekSitbon GPU passthough doesn't seem work with this version of Macinabox. Even Monterey failed to start; I'm going to roll back to the previous version until someone has a solution.
Does Unraid support Apple silicon?
Has anyone had success in passing thru an AMD card? I have an RX560 and it just hangs on the apple logo. Prior comments suggest that others have had similar issues, so just checking back.
I don't see the "QEMU command line section on my unraid box", is this something new?
你需要在 UNRAID 的 设置 - 通知设置 中开启 Docker 通知功能，才能看到它。
Edit: Fixed. I’m an idiot.
Hey fellas! I have an issue if anyone can help. I had previously tried to install Macinabox and failed (about 3 months ago) yesterday I tried to install the new one but it didn’t show in VMs. Then I deleted some but not all of the files in app data hoping that would uninstall everything (I’m a noob) that didn’t work. Some of the folders I didn’t have permissions to delete thru windows browser browsing the share and I don’t know how to do it directly thru unraid. Now apps shows macinabox as installed with no option to uninstall and it doesn’t show in VM’s at all and most of the folders are deleted from the appdata share… help 😭
Hi ed thanks this is peak. Quick question do we need to do the opencore thingies like with the « old » macinabox?
Is it possible to install on a server with a AMD Ryzen cpu?
Theoretically yes, I've seen some people on Reddit do it. If I'm not mistaken, the `CPUARGS` in the Macinabox Docker template are "masking" the CPU to the guest OS, so MacOS thinks you have a Skylake Intel CPU, when in reality you could have a Ryzen. I'm not 100% sure though!
Is anyone else getting warning: host doesn't support request feature: xxxx?
Don't worry about that message.If you see those warnings, it just means your host doesn’t support some CPU features requested by the VM. The VM will still run fine, so you can safely ignore the warnings.
@@SpaceinvaderOne Does that mean that the CPUARGS need to be changed / modified? Is it possible to get rid of those warnings?
Got it up and running but iMessage doesn’t appear to be running. Are there more patches etc I need to do after install? Really just wanting this for bluebubblea and maybe AltStore.
I installed Ventura, and it is not letting me sign into my Apple ID in Settings or Messages :/ wanted to get this working for BlueBubbles... it seems Apple is on to us.
@@tjgruney mine isn’t giving me any kind of error. When I type in a number or email it turns red.
@@chrisperrywv were you able to figure this out? I gave up but am trying again to see if any updates...
@@tjgruney I didn’t. Sorry. I also plan on re-hacking in the future but had to prioritize elsewhere for a while. I - probably like you- plan to delete the entire setup and start over. I was really just spinning it up for blue bubbles and maybe AltStore.
I installed Sonoma and updated to Sequoia - MacOS 15 (aka Sequoia) is now detecting if you're using a virtual machine and will disable some Apple ID functionality. I know Macinabox doesn't "support" Sequoia, but I still can't be the only one who tried, right? Do you have any plans to support Sequoia in the future? Have you already played around with it and found came to the same conclusion as me? Any way to bypass Apple's check?
I installed Ventura, and it is not letting me sign into my Apple ID in Settings or Messages :/ wanted to get this working for BlueBubbles... it seems Apple is on to us.
@@tjgruney I checked again on my VM - I'm still signed into my Apple ID and most things are working - so far I've noticed that iMessages work, but normal SMS messages don't go through. I didn't have these problems on my old Big Sur VM.
anyone successfully passing through a apple comaptible wifi card and connected to a password-protected wifi network? previously when I updated to unraid 6.12 and connected to a wifi network in a macos vm, this just crashed the vm. Has this been solved now? If anyone knows about this, please let me know. thx!!!!!
It seems like if you give the VM a name macinabox will insert that name into the downloaded install.img file name. I named mine Sonoma1 and ended up with a Sonoma1-install.img which caused things to fail because macinabox was looking for Sonoma-install.img
A quick fix was renaming the file in the isos directory, editing any value in macinabox setup but changing it right back, then hitting apply
Edit: Doesnt matter, it wont boot opencore anyway. "Guest has not initialized the display (yet)." Unraid 6.11.5
Edit2: It works if I scrap everything and do not name the VM, just like was done in the video
Edit3: Quits working if I try to edit the VM at all so it is not the name thing. I added cores and increased the ram, re-ran macinabox and got the fixed notification, right back to the display error again.
You'll need to re-run the Macinabox docker container every time after you edit the VM. Just makes sure the XML is valid for the config.
@@christiandavies7650 that doesn't fix this error. I have the same issue and the xml appears to be perfect and I am getting macinabox messages saying the xml is fixed. yet opencore isn't working and I get "Guest has not initialized the display (yet)."
Thanks for pointing this out. I have just pushed a fix to the container to address this.
@@SpaceinvaderOne amazing. Thank you very much.
stalls at apple logo
This shit doesn't work at all
Boom!
First
3!
First! 😂
You sure were. Thanks for watching :)
I only can see one disk after powering on the VM, from the log, it said "Warning: exec(): Unable to fork [TIMESTAMP='1729572883' EVENT='Macinabox Container' SUBJECT='mac-ventura' DESCRIPTION='XML checked and fixed/updated successfully.' IMPORTANCE='normal' CONTENT='' LINK='' bash /boot/config/plugins/dynamix/notifications/agents/._Pushover.sh] in /usr/local/emhttp/webGui/scripts/notify on line 219
Warning: exec(): Unable to fork [TIMESTAMP='1729572883' EVENT='Macinabox Container' SUBJECT='mac-ventura' DESCRIPTION='XML checked and fixed/updated successfully.' IMPORTANCE='normal' CONTENT='' LINK='' bash /boot/config/plugins/dynamix/notifications/agents/Pushover.sh] in /usr/local/emhttp/webGui/scripts/notify on line 219" what does this mean?
Thank you!
Going to try this on a trashcan it will run vms only, so the unraid part of it the ssd will be setup in a pool of 1?
No parity or cache. Would that work?
How did you get it to book, not having luck booting off the usb?