Comparison: Every LEGO Clone Captain Rex Minifig EVER (2008-2023)
HTML-код
- Опубликовано: 21 июл 2024
- YES, I am aware this doesn't have Old Man Rex in it... if you're about to comment that, you clearly didn't watch past the 30 second mark LOL
In this video, I'll show you every LEGO Clone Captain Rex Minfigure ever made, starting with the 2008/2011 Phase 1 minifigure and working our way up to the 2023 UCS Venator Phase II Version!
Shop for LEGO here (affiliate link): go.magik.ly/ml/oflu/
MiniSuperHeroesToday Instagram: / minisuperheroestoday
Send me stuff ⤵️
MiniSuperHeroesToday
P.O. Box 40153
Nashville, TN 37204
Get MiniSuperHeroesToday Shirts, Swag, and more - johnathan-pushkar.creator-spr...
Get LEGO sets HERE (affiliate) - go.magik.ly/ml/13wds/
Let me know what you think of this review of the LEGO video in the comments below, and let me know which characters you'd like to see me build next!
(FTC disclosure: I may be compensated as an affiliate seller if you make a purchase using the above links.)
#LEGO #StarWars #LegoStarWars
2023 is the best one yet, I don’t care what anybody says.
Exactly. Even with helmet holes/lack of waistcape, the helmet print is SO much better than the old Rex and in general looks a lot better imo
Agreed and I wish I could have it but I’ll never be able to afford that figure or the set it comes in
The figure is great, people are always finding reasons to complain these days
Exactly. Like obviously it would be better if it had a waist-cape but the figure is so much better in every other way. The fact that people are calling it bad is just nuts to me.
You have my point
Rex is naked without his rangefinder let's be real.
i'd rather have a rangefinder slot than a kama imo
@@HondaOhnaka Rex without a rangefinder reminds me of those times when Cody didn't have his visor (early clone wars seasons)
@@productionsinparadise2880 so true
@@productionsinparadise2880That was an animation error as far as I know and it was only really present in the Clone Wars movie with Cody scenes inside the Venator when he first talks to Obi-wan and later on when he commands the group of Republic Gunships to land on planet Teth to aid the remains of the surrounded 501st legion and Anakin and Ahsoka.
The new Rex looks so cool with the arm printing. It is too bad we get Cody and Fox in cheaper sets but Rex is in an over $600 set 😅. Hopefully he comes in a smaller set some day or he isn’t too expensive on Bricklink.
Wdym too bad to get in a cheaper set, it's really good unlike Rex which then it is too bad cause not everyone will be able to afford him. But it would be best to buy the new Rex minifigure on his own. I'm still looking for place where I'll be able to get him early, but so far, that's proven to be impossible until it releases.
They've already started to steal it from the factories and sell it, it goes for about 50 bucks. Not the cheapest but still more affordable than the 650 set
he should be coming in a microfighter hopefully. I pray they include his rangefinder, though if not I can always steal it from boba fett or some extras I have lying around
@@tonyflores270That’s not what he said.
People really need to stop complaining about those minor inaccuracies between two Phase 2 versions and they just don't get this:
2013 one looks more accurate to his character model used in season 4-7 of the Clone Wars show while 2023 one looks more accurate to his live action appearance as seen in the Ahsoka show, there I said it, they are 2 different versions of the same character!
Yeah
Agree
No actual Kama tho, Lego is cutting corners
I personally really love the og p1 rex, mixing the p1 rex and giving it the Pauldron and printed arms makes it perfect.
It was so good to see Rex in Ahsoka. I would definitely like to see Captain Rex, Hayden’s Anakin, and Ahsoka in live action together more.
You know that was actually a stray cosplayer who sneaked onto set during a take right? Rex wasn't meant to be in that scene like the jeans guy.
I normally prefer P1 armor, but Rex looms way better in his P2 armor, just looks more distinct.
I forget that Captain Rex was present during Return Of The Jedi, along with Hera
You know, if the 2023 Rex had a waistcape and a shorter pauldron it would be a top tier figure
But in universe it’s pretty big
@@nursestoylandbut it doesn’t cover his entire arm
Put macro binoculars on the new rex to make an Umbara rex. It also covers both helmet holes and makes him look so much better
In my opinion if the helmet hole was on the dot under it then you could not put the visor on it will be too low and the new binoculars just my opinion
I wish they would keep the holes, but remove the ones that are right under it ngl. Makes it seem better, and gets people to complain less. Its now serving a function and its not detracting from the ascetic one.
Nice expensive though
It's every Lego thing ever
You know I thought I lost the first Captain Rex figure over the years but I'm glad I still have it.
Nice video!
Do a video where you compare the second marvel cmf 2 to your customs that you made
Ph1. I just switched the kama for a cloth one but kept the hard pouldren and 501st trooper legs.
So there 2 that are legit completely the same beside thw visor no head differences or slight blue change?
There’s three other Rex figs, another cw variant, rebels variant, and rotj variant
Saddest thing ever i sanded the fin down on the phase 1 one trying to make it look like phase 2 (i was a kid)
have yo done a minifigure showcase for spiderman across the spiderverse?
Acabo de comprar el legó del capitán rex del 2013 espero haya Sido una buena opción ya que me costó 170 dólares 😅
Unfortunate that they finally release another Captain Rex figure only for it to be in a probably $500+ set
It’s $650 USD, he says it in the video.
@@turbkeysamdwich1880 oh I missed that part, but also $650? God damn it
@@G_R_H_Filmsyou can buy the fig separately. When the UCS razor crest came out, the Mando gif was going for 45-50 if I remember correctly. So I’m assuming rex will probably go for the same amount.
@@brendan7094 yea but it’s probably gonna be expensive as hell
@@G_R_H_Filmsyou can get him for as low as 35 from some sellers right now
my Favorite clone
Still can't figure out why Lego is unable to make a proper pauldron. It's not supposed to droop down like that.
Hey I have one of the displays from Target for avengers Infinity war I just wanted to share that cuz I think it's cool
I like the phase 1 best
Mostly I’m just gonna wait till I get the mini figure on bricklink because I’m not gonna waist $700 on the Ucs venator
They've done well with Rex
He said Rex needed a hair piece did he not know Rex is bald
Can someone tell me I bought the rex came with the box the speeder and obi all good the only thing I want to know does the helmet have a Lego logo on it it’s round inside so that tells me it legit
If the helmet has a Lego logo on the anti stud then it’s legit
My favourite is the phase 1 rex
The Best Rex are 2013 and 2023
Both have Great details
But to make the perfect Rex Figure you must take the waistcape, torso and Head from the 2013 one and
Arms,Legs,Shoulder piece and Helmet from the new 2023 Rex.
The 2013 Clone Wars Face looks better and The Torso from the 2013 Rex looks so much better than the 2023. I love the small dirty details from the battle on his Torso.
personally I'd use the 2023 head
Hi
i love the new rex and even if i cant afford the UCS venator i will def get him anyways
How will you get it? On bricklink?
@@What-gb6vk i got it on a app called whatnot.
I like phase 1 amd 2023
For me 2023 is the best, I always hated how he looked without the range finder and now we finally have it, I also didn’t like his helmet cause his “face” looks too small
Phase 1 is the best no questions asked
Hello there
General Kenobi!
You are a bold one.
Idk I’m gonna wait till the new Rex goes in bricklink because I ain’t buying a $650 set but I will buy the new Rex figure on bricklink that’s really all I’m doing
Hey, what about the guy from endor??? He's technically rex too... :/
There’s 7 rexes that have been made
Just need the head and the printed arms from the new one for the 2013 version
I didn't know the there was an old phase 2
I’m going to buy the new captain Rex figure as long as it’s under the $650, hopefully in the $100 range
If the arm print is worth 100, this figure will likely not remain fully exclusive, I find that hard to believe after what Lego has said in the past.
many people are selling the figure early on whatnot for 30-40 dollars. only downside is it doesn’t come with the pauldron but it’ll probably not be too expensive
2013 is best
Keep telling yourself that
Wow I'm early
I think the og p2 captain Rex may still be better
bro the poldren is too big on commander rex which is not accurate and the pouch is also not accurate its too big blocking his chest play how could you forget that come on dude
First
Yeah, but does anyone actually care?
@@turbkeysamdwich1880 apparently you do enough to respond 😂😂