Updating Firmware and Maps in my
HTML-код
- Опубликовано: 2 май 2021
- #myCupra #CUPRA #SeatLeon #DIYAuto #EA888 #IS38
Attention: this video is now superseded by the 2024 version that can be watched here: • Updating Firmware, Map...
This is the 3rd video about my new project car, the Seat Leon Cupra 2019 model. This video is about updating the firmware and maps in your Seat. Yeah, it is a rather simple process, but somehow I used to messed up. I found a nice methodology and I thought you may find it useful. Enjoy!
As I explained in the video, there are two methods for enabling extra features in the infotainment system. The dealer is the one we all know, and the other one is shown below. Please use it at your own risk!
Workshop manual - vwts.ru/engine/engine-chha-ch...
More info.: linktr.ee/javitosprojects 
Авто/Мото
Hoi allemaal! A new version of this video is uploaded and it also includes the update of the Point of Interest, Speed Cameras and the Radio Database! You may have access via the following link: ruclips.net/video/kxS_ZfOZVS8/видео.html
I've found that that after trying different combinations of version for updating the Map data on my 2019 Seat, that i had to use the original "OVERALL.NDS" from when i originally got the car before i did any other updates before this time. It didn't work with the file from the update i did in 2022 but it did work with the one date June 2018. Thank you! Your video helped fix my maps after trial and error.
Thank you for sharing this vídeo! I was unable to update my gps to the lastest version even doing every step that is on the official website. Now is running perfectly 😎🙌
Oh yeah! Glad to be of help!! Have a nice day!
Hallo Javito, Zeer veel dank voor het delen van dit filmpje, ik kreeg de update maar niet in orde maar met jouw hulp rij ik nu opnieuw met de meest geüpdatet versie, zeer veel dank en waardering voor je moeite!
Bedankt voor jouw reactie Stefan! Groetjes!
Thank you! Perfectly works with that file what was needed to replace👌
Your advise to replace the file is brilliant💯(SEAT Arona, updating Navi maps) and worked for me perfectly! Thank you for saving my time!😇
It's a pleasure!🙃
Hey, can someone send me the overall file pls
After hours of trying, your advice with the overall.dns file was the key. Thx a lot from Germany. Btw tarraco 2019
Thank you very much! I had the same issue with the Navi file. Work perfectly now
My Cupra 290 didn't come with an SD card so I'll have no chance in updating and grabbing the old file, which sucks, however, I was wanting to know something... Can you put the Sat Nav into the instrument cluster & use carplay/android auto at the same time?
Thanks for the video, very helpful 🖤
Výborne, pracuje ako má!
First of all, thank you very much for your sharing. Good luck with your spirit. My car is 2015 seat leon FR plus. There is a 6.5-inch previous-generation screen and a unit with code 824. Currently 0252 MU software is available. I want to upgrade 0346 to get the mosaic logos in the interface and new visual elements in the driving mode. I got some information about 0330 software should be installed first and then 0346 should be used.
@JAVITO The "OVERAL" file trick worked for me, as well, I would add to people here to make sure to download the maps from seat country site matching original country of your car in case of import, it worked only like this for me, thanks for this video which is really useful, very good work !
Hi @adbelaziz k! Nice to read that this video could help you! Thanks! Actually, you have a very good point and I forgot to mention that in the video. Anyway, I will be making a "2022 version" in full detail in some time.
@@javitobosch it's never too late, and it never could happen without your outstanding contribution here 👌👏
Thanks heaps Javito! Your Navigation Update guide was a lifesaver. I was struggling till I copied the "OVERALL.NDS" file from the backup over the top of the new version on the SD card. Thank god I did a backup! Did you try the 0516 firmware yet? I have the same hardware as you in my 2020 Cupra Ateca. I'm wondering if its worth upgrading from 0514 to 0516?
Thank you! Copying the old file solved the issue. Seat should hire you
My pleasure! It is such an easy thing that is not mentioned anywhere and can avoid you a nice and painful headache...glad it helped you!
Hi all! thanks a lot for your interest in this video. You can find the link for the infotainment firmware in the description! Remember to choose correctly your infotainment unit. Otherwise you may brick your unit! I will be making a "2022/3 version" and I will try to be as detailed as I can. Please let me know in the comments if you want any part of this video more in detail and I will do my best to include it in the next video! Have a nice one!
Hello, it didnt work for me as i have seat Leon cupra 300 mid 2018. I downloaded the file and put them in the SDcard and didnt work
@@Hatchbacksnerd Hi! Are you referring to the firmware or maps file?
@@javitobosch hello ! Thanks for replying, yes the firmware file. Running now the 0472T.
@@Hatchbacksnerd No problem! Did you make sure the infotainment system (hardware) corresponds with the file you downloaded? Also, when you insert the SD card, format should be FAT32 and should be inserted in slot 1, and no other hardware should be plugged in. Make sure that the SD card has only the update firmware files (unzipped if I remember well).
@@javitobosch yes sir.
I have the mu 0478t and want the 05xx version
Hello and thanks for the information. How can i know which MIB update file should i download for my seat? My model is kj1\6f (2019).
Thanks.
thank you very much
BIG THANKS for the big tip on 08'55" beacuse if not, it doesn't work! 🙌
Hi Javito. I tried to find the find the infotainment version for my car through the site you provided, but i can't find it to download it. I have already downloaded the file for the navigation system update, but is only possible to do it after the firmware update in the infotainment system. Mine is a navy system plus from 2020.
Thanks in advance
Hello , can u help me with the update ??? I have a Leon ST FR Facelift from 2017 , the navigation is 6PO , I updated the maps but I don't know how to update the firmware of my unit .
says on the seat website "MapCare is not available for UK vehicles. Please note that the only way to update the Sat Nav is through the purchase of an SD card from an authorized dealership." sadly, im in the uk so im unable to do this
Hey @Javito, where did you found the latest version for your unit. I've the exact same one, but I don't find any newer version as the installed one (wich is MST2_EU_SE_ZR_P0514T). Thanks in advance!^^
Hi Sebastian Weiland! No worries, just follow this within the MIB Solution page. Go to MQB_Solution - MST2 - TechniSat Preh - Firmware - SEAT_ZR. There you will find the 515 and 516! Good luck and thanks for reaching!
Hi Javito, I can not find my software firmware version (MSTD_EU_SE_P3311) at the mibsolution website. Do you have any idea where I can find my update version? Waiting on your response. Cheers
Thank you for your sharing and support, i have ateca 2023 , i am in Morocco, i cannot connect wireless carplay , and i noticed wifi grey ‘not activated ‘ please support
my actual software is mst2_eu_se_zr_PO515T do you know thats one is the new? or the one is posted in te web page is the one and what is the change ?
Will works this method (replacing OVERALL.NDS) with latest 2023 maps?
Thanks 👍 appreciate your video, same here I had to copy from old maps for new one to work, why they don't explain it properly on seat website I don't know
Thanks
It is actually a very good question! I once called SEAT about the maps and they said the technician would do the job and that they actually don't know. I understand if they picked up the phone from the sales side. But, in the website is so simple to add the simple trick of leaving "the" file in place...Perhaps WE are doing it wrong?! Who was first the egg or the chicken? Thanks for your comment and glad you found the video useful =)
I have Leon 2017 . I want update the firmware. I will buy new SD card of 32 GB. I will format by Fat 32 . Could you say me when I will download the zip file....which ones I have to copy on the SD card?
Hi Javito, I'm trying to update the navigation of my Seat Ibiza FR 10-2018, but it first says "SD card 1: The source contains the navigation database". After that it says: "Checking navigation data..." just as your video does. But it keep staying at this screen. Nothing further happens. Will it be resolved after pasting the old data in the new folder? By the way, you're living near to me:)
I've got the exact same issue as you, did you ever get it fixed?
Hi thanks for showing how to update. Do you know where to download the firmware for the seat arona car is from 2021. Thanks
Hi Haider! Unfortunately no. All the resources I used where coming from MHHAUTO forum. It take a lot of time to find what you want, but it tends to be there. PS.: don't pay users for services!
where can i find the version ??
thanks a lot for sharing you experience I appreciate it.
-i have 0514 and i have apple car play and android auto working perfectly, do you think upgrading is worth it? I have to say the screen sometimes act crazy but not sure id the software is the reason
-Also i see in the link u have posted you have 516t is it fine to upgrade from my 514 right away to 516t?
thanks in advance!!
Hey! I am super happy that you found this video useful! First of all, I believe the changes between 514 and 516 are minor. We as users are not really able to notice the difference. I must say that from 479 to 5xx my unit suffers from less freezing events (I had to restart the whole unit every time). Perhaps we are talking about the same issue? I think if version 514 works so well as you mentioned in your car, just leave it as is. On a separate note, I just installed 516 (video soon!) and it works as well as 515. I could see that there were minimal upgrades in CPU.main files (maybe for efficiency?). Anyway, keep me posted if you have any issue =)
@@javitobosch mine acts jumpy if im zooming in and out for example in the maps, that is why im not sure if the software would solve this issue as it seems like the touch capacitor in these cars are a bit old. Total freeze happens every 3 weeks or so. I think ill give the update a shot, but do u know if there is anyway of backing it up if everything goes south?
looking forward to your video update 🙌🏻
thanks again, cheers from Leiden!
quick update:did the update and it took like 15-20 mins, as u said i did not notice any difference. Thanks man you are a genius!!
-on another note though: i updated also the navigation, it works perfectly but what i find weird is that after the update it doesnt start with 6p0 anymore it starts with V0 even though i nade sure i fownload the 6p0.
cheers man!!
@@AKJ19950 Thanks for keeping me in the loop! I was about to record the last part of the video and you got me curious. Indeed, the new maps update starts with V0 and I have no idea why (I also made sure that it was the right one). The thing is, it works! Thanks for letting me know and greetings from Boxtel!
I format the old card, because the files was corrupted, so i dont have the overall.nds to replace it, how can i find one that work in my car?
Hey Marco! Good question! To be honest with you, I learned this trick because I erased all navigation data from the SD card the first time. I did not know what to do, so I decided to start by finding someone with the same problem online and I was lucky (www.seatcupra.net/forums/threads/updating-the-inbuilt-mib2-satnav-mib2-tricks-and-lost-mib1-card-solution.388586/page-53). I checked the maps version that is shown in the SD card and/or in the infotainment system and also found someone with previous maps version online (no link, unfortunately I do not have it). I recovered it from there. Perhaps I could help you if you tell me your navigation version that is shown in the infotainment system and also if the SD card is showing some version too. Another thing you could do is to run a data-recovery program. The file is pretty small. Lastly, you could buy an original replacement from eBay. Good luck!
Hello
Could you please give me that file because i did formate the sd card without doing a copy of the files
hello, nice work.
Hi @Stéphane Lacoux! Thanks a lot for your comment! Actually, I found a very nice repository for many VAG cars and different infotainment units. I will leave the link to the newest firmware version in the description, so you can help yourself! Anyway, I will upload a "2022 version" in some time, so stay tuned!
@@javitobosch I found the 0516 version is it ok to update directly from the 0514 ? you put a message for uk users about mapcare, what is it ? My car is a french one I dont remember if I had get this service, how can I check ?
@@stephanelacoux6711 I also updated from a 047X version before. No issues at all as long as you respect the recommendations! What I do get in OBD11 is that the unit reports a message that the firmware and the maps are "different", but it is "green" message (it gets cleared out automatically). A message for UK users? The link is not mine. I found it online! I am not the owner =) I have a DE Cupra, imported to NL. I always try to use the same stuff as I found in the car previously, so in this case European (EU). I believe that should be enough. Good luck, man!
@@javitobosch I was talking about the firmware version the 0479 is older than mine 0514 , but I found the 0516 in another folder on the site. The message is for UK vehicules at 7:43 in your video, you were talking about mapcare. I thought the NDS file trick was ok too on non mapcare sd card...
Via welke website kan ik de meest recente firmware voor mijn Seat Ibiza FR uit 2018 downloaden? De link om de omschrijving van de video werkt niet (meer). Alvast bedankt.
Hoi @djannick95! Ik heb net de link gecontroleerd en deze is een beetje traag, maar het werkt =). U kunt ook de volgende link raadplegen: mib-helper.com. Success!
Can I use it for my 2014 seat leon Tgi with the basic system unit?
Hi Kostas. If I suppose it is a facelift model (5F), then this method should work. Remember that your firmware (software) should match your unit (hardware)! =)
My unit seemd to update the firmware correct. But after the second reboot. The unit is stuck on the Seat bootscreen for over 40 minits. Do you know how to recover this?
Hello! Have you tried to press the on/off button for good 40 seconds (hard reset)?
can you please help me to witch version should i pick to update? i have seat ibiza 2018 and the currect version is MST2_EU_SE_ZR_P0462T
Hi Dimitris! Thanks for your comment. Apologies for the late reply. Please make sure that the file you pick up is also named as MST2_EU_SE_ZR_P0XXXX (it will correspond to the same infotainment unit you already have) and the version is above 462. I hope I have informed you enough. Good luck!
@Javito, thanks for the video!
I have question:
To update the firmware, can I use a regular usb stick (fat32 format?) ?
Should the SD card in slot 1 (maps SD) and 2 be empty while updating?
How exactly did you do it?
Does Full Link still be functional after the update?
Will Errors be shown, because it wasn't a "legit" update by Seat?
I don't know if a update is necessary anyway for my Cupra..
My current version is: 0468 -> want to update: 0478 (05/2018 Cupra 300 4Drive)
My hope is that the "sport information" HMI display will be fixed. Sometimes the shown indicators (for example water temp) are "freezed up" and will not be shown. After a restart they're back to life. This issue does not always happen. Did you perhaps experienced those issues as well?
Thanks in advance! Cheers from germany!
Hey gearloose! Thanks a lot for your message! As far as I remember, I used a SD card in Slot 1 ( I think this is the reference slot for the system) and I removed any other connected devices. You can always try from a USB stick and see if the car actually detects it as a valid device.
The firmware update will not block the "extra packages" you have already installed in your car (e.g., sport HMI, Mirror Link) but it might solve glitches in them since they should be embedded in the update (or at least this is what sounds logical to me). Honestly, I did not see any difference when I updated mine. It was already on the 5xx version, so I did not expect big changes.
Honestly, I think these firmware packages are "legit", otherwise I would have needed to patch my unit first.
Version-wise, try with what you planned and if you feel confident go ahead and update to the 5xx version (if your hardware allows!). Nice car of yours...I am pretty sure you are enjoying/squeezing each of the 300hp XD.
I have never had such issue, but what I had in the past is that when I am driving, the whole infotainment system decides to restart, so it freezes first and then after ~10min it restarts while driving. Sometimes I had to stop and switch off the engine, get off the car and lock/unlock it. This hasn't happened in a long while, so I attribute this to the latest update, but I might be wrong!
i would understand if the HMI Sport freezes after a few hours driving due to overheat of the unit, overloaded RAM (if it has), or many processes being executed simultaneously (multimedia + BT + call + navigation + Car Play + HMI at the same time, to give you an example).
I hope I am clear and greetings from the Dutch neighbourhood!
😉
@@javitobosch thank you for the detailed answer and your time :) I will think about the firmware update, firstly the maps update.
Cheers! 🍻
@@javitobosch sorry, I forgot something.. What I saw and read was, after installing the firmware update, the error "confirmation of version change" occurs. With Vcds or Obd11 it can be deleted ("Mr-Fix" showed it). Did you delete yours? If not, does this error will be shown/pop up on the head unit or just when connected to vcds etc?
@@Testobesser92 hmmm...good one. Sorry for the late reply (very busy lately...) I like Mr-Fix! I do get an error on the maps update in OBD11 but is labelled as "green" (it is deleted by itself). Functionality is 100% OK, but never thought of actually taking care of it as it is displayed as "not important" although there was nothing there before... I will definitely take a look whenever I update to the next version. Thanks!!
I accidentally deleted the original data that was on the SD card (I was an idiot) and now the navigator doesn't work anymore. Could you send me the original data to see if I can get it to work again? Thanks.
Hey Mauro. I am pretty sure you are not an idiot =). We all make mistakes and learn from that. Actually, the first time I updated the maps in my car, I did exactly the same 😂, so there is a solution. You need to download the same maps version as the SD card originally came with. If that does not work, I would appreciate if you tell me the maps version that should be specified in the SD card, so I can help you further. Good luck!
My Leon Cupra 5F 2019 model has the software MST2_EU_SE_ZR_P0515T installed. I found there is 516T version available in the archives. How do I update it? Also does anybody have any idea why android auto wireless adapters do not work with my cars full link?
Hi! Thanks for reaching me and apologies for the delay! New update video is live: ruclips.net/video/kxS_ZfOZVS8/видео.html. And as of the second question, I have no clue unfortunately. Let's hope someone in the comments or in a forum can help you. Good luck!
Can you please help me update my seat leon fr 2015 please
من فضلك اريد تحديث سيارتي والسبب يكمن في عدم اشتغال الشاشة الثانية امام السائق الشاشة الرئيسة
Hi Javito, I was hoping you could help, i've downloaded the firmwire update but it is telling me it is unable to read the release information file. My system is currently MST2_EU_SE_ZR_P0472T and i'm trying to update it to MST2_EU_SE_ZR_P0479T. I Have a 2018 Seat Leon FR. Any help would be awesome buddy.
Hey Chris McClintock! Thanks for your message! Let's see if I can help you. Have you placed the SD card in Slot 1 with ONLY the firmware files? The file should be unzipped if I remember well (I will be making a new and better video soon). As far as I know, you can also use a USB flash drive and even a CD (?!). Also, based on the message, perhaps the file is corrupted? Maybe downloading it again could solve the issue (maybe). Let me know if you managed and if not, I would appreciate if you could please send me a details mail to javito.bosch@gmail.com. Good luck!
dove trovo il fw per seat ibiza tgi 2018 ... qualcuno ha il link
Hello mate, i hope and will really appreciate if you can help me..please, i jist but my seat leon xcellence 2017 and tried to update my navigation system Europa 1 (V4) is my sd card originale from seat.. my problem is i tried update following your video but it when i tried again it can read the SD card but says that the navigation system is not available..what i can do to fix this problem? Thanks in advance..
Hi @Cassie Ross! Silly question: did you try to place all those "old" files back in the card and test if everything is still working?
Hi, my ateca 2019 has a navigation system plus (with HDD). i don't have mapcare which is necessary for a map update. does this trick work also for my car? i would be verry happy for an answer. thx.
Hi Napim! Apologies for the late reply. Honestly, I haven't had the chance to play around with a Navi System Plus and a HDD. Perhaps you could read though in this webpage: www.seat.com/owners/about-my-car/navigation-systems/ateca-navi-system-plus
For navi system with HDD you can use any SD card. That navi use different maps (almost 30GB)
I have just bought a Seat Ibiza (2020) but I ave deleted all the contents of the original SD. I just noticed there is one file that needs to be copied from the original folder to the new on.e What if I deleted that file (which I did)? Can I get it from somewhere?
Yes, you should be able to download that very specific version of the maps you deleted (usually specified in the SD card sticker). From where? I honestly would start by googling it, because I believe there must be at least one forum keeping track of these things. There was another user in this thread with the same issue. Keep me posted!
@@javitobosch I tried to download the maps from Seat site and I unpacked it into the original SD card, but when I inserted the card in the car slot, and tried to read the SD card, it throw an error reading the SD card. Do you use Signal or any other chat app other than whatsapp? I don't use WhatsApp. Or how can I talk to pi directly?
@@psysc0rpi0n31 You can contact me via Instagram if you like =). Remember about the OVERAL. NDS file from the old maps version =)
Hi the firmware link not working anymore, can you please update the link.
Thank you
Hi Anass. Thanks for noticing. The link was not mine, but I hope I will find something similar and let you know asap. Thank you!
Forgot to save the "OVERALL.NDS" before formatting, I might be screwed :'(
Hi. Could you tell me what is the root folder structure of the original card? Is it ./maps or ./00 and ./EEC ???
Hi! Thanks for reaching me! I have made two screenshots for you (one of the main structure and the other one more detailed): mega.nz/file/Zf5kRYIJ#kFEgGaQL5kpZL5NCHOI9IIqSklid3Ghlmm83NVEbCxo
mega.nz/file/hG4ETCwT#YemF4BjZ1BWFKvA7udKtOySTjsllEXGxqreMScLF2wg
Let me know i this helps! Good luck!
@@javitobosch I think that's wat I have. maps in the root folder and then 2 sub folders with the same names. But the car couldn't read the SD card. No idea why!
@@javitobosch I have a question. Do we have to update the software AND the maps or by updating the maps, the software gets also updated? I have 0514 in my car, I guess but when I insert the SD with the maps/ folder, it tells me that the versions file could not be read! Can you help me?
@@psysc0rpi0n31 sorry for my late reply. Busy days. The maps and the firmware are two different things. Both are hardware-dependent files by means of the type if infotainment system you have. Perhaps if you could share the "Installed train SW version" line from your car, then I could help you further. Check 4:36 in the video for more info and good luck!
@@javitobosch can I contact you somewhere else? Telegram, Discord, Signal??
Hey, can u send me the overall.dns file please !!
Thanks for the video and the link, but i've run into an issue
When I run the update I get the following error:
"Unable to read the file meta-information
dependencies of the update are not met"
* The car is a 2017 Seat Leon 1.4 FR
* The current software is MST2_EU_SE_ZR_P0359T (0359-3)
* I downloaded and unzipped to a SD car MST2_EU_SE_ZR_P0479T
Can anyone advise me thanks ?
Hi Leon! Thanks for leaving a comment! Then only thing I can think of is that the file is corrupted despite of a successful decompression. Silly question: have you tried to download it again? Apart from that, perhaps you could try to proceed with the firmware update, but using the same firmware file as the car has right now (359) or the very next version (e.g., 360?). I think this could also help you troubleshooting. Best of luck and don't hesitate to reply to this comment for further help!
Can i use it for my 2015 5f ?
Hello Jonas Ir. Sorry for my late reply. Would you please share with me your "Installed Software Train" version (@ in the video)? With that you we can check your infotainment unit (hardware) and check in the link if there is firmware available. But my Seat is also a 5F. I suppose there should not be any problem.
Would you please help me with update firmware for VW T-Roc
Hi Day Work. I am happy to try. Please, PM me through Instagram. Greetings!
@@javitobosch With my pleasure ;)
can you give us the link to update the fireware???
Hi just kais! You can find the link in the description. It is from MEGA.NZ. Let me know if you need further help =)
@@javitobosch yes i think that i need more further help sorry 😁
I want add that my version système is 0425 and i want upgrade to 0480
@just kais, no problem at all! Would you please share with me your "Installed Software Train" version (4:31 in the video)? With that I could probably forward you to the right firmware, so I can make sure you do not bric your unit =).
Ciao non mi fa entrare mi dice username invalid
Can you guide me to My update vice files seat Leon 5f 2019
Can i find you on Facebook?
@@jf-prints9455 Sorry for the late reply. You can contact me through Instagram.
@@javitobosch I also have a 5F from 2019. Would you mind me contacting you too in regards of the files?
@@Sora185 For sure. Contact me through Instagram. Unfortunately, I do not have all files for all models, just for my cars but I am happy to help you troubleshooting.
How to replace the file ???
Hi! Could you please be a more specific? Do you mean how to replace the OVERALL.NDS from the old maps folder into the new one?
I got this version name wich file do i need to download from your link ? : mstd_eu_se_p3311