DIY EZ Green Bow Press Draw Board
HTML-код
- Опубликовано: 28 сен 2024
- Materials:
-1.5" x 12" 12ga. Square Tubing, mild steel
-0.75" round bar, mild steel
-5" x 4" 12ga. sheet, mild steel
Total: $28.17 shipped
-TYT 600lb winch = $28.04 + tax
-Alien Pro bat grip = $9.99 + tax
Total~ $66.20
Not including expendable materials (grinder wheels, drill bits, welding rods/gas, electricity, spray paint, fasteners, etc.)
I’m a 29.5” draw length and I cut my arrows to 28” on the advice I got from Aron Snyder. That’s roughly middle of the shelf and I’ve had great luck. Awesome draw board invention!
Great to see a man making something rather than spending the 250$. Great video.
Wow nice invention usually arrows are cut 1 inch longer than your draw length nice invention 👍🏼
good video man thank you for sharing i got the same bow
Of course!
Thanks for the comment!
Good bow :)
Took three deer with it so far.
The mark you made in my opinion is a good sound solution for your draw length. The guys who have mentioned as long as it is in front of the rest are correct, essentially years ago when all the companies where chasing arrow speed, not that they still aren't, almost everyone came out with some type of overdraw for the bows, (short lighter shafts equals faster arrows) I recall those days of the extreme over draws and they were fun to shoot,) as you mentioned seams sketchy at best and I believe that is the best way to say it hahaha. Great Job on your draw board, thanks for sharing, I may try to make one myself. Thanks again for sharing and I hope you recovered from your cold from last year when you made this video.
Have a blessed week.
Dale
Dale!
I appreciate the feedback brother!
Have recovered since the video was posted and no longer sound like a frogs in my throat haha.
Have a good hunting season and God Bless!
thanks
You're welcome!
Can you tell me how much it cost all together with the metal and wench? Doesn’t LCA draw boards use angle iron for their mounts?
Sure thing man, check the video description. :)
Does your welder have a chiller? If so what is it?
I think its just air cooled.
I believe its an AHP Alpha tig 201?
Older model ( 2 years ago?)
I did the same build.. those screws you were talking about.. except I used angle for the winch as well.. I just loosened those screws you were talking about slid the angle in the tubing and then tightened the screws back down to hold the angle in place
Atta boy, I'll have to try it out!
Where you find that little winch? What is selling name? It looks so little or do you have very big hands? Thanks for your video.
www.amazon.com/gp/product/B08PV97MGH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
You should sell these! I’d buy one if it saved me $250 from lca
Ya Id buy one too!