You explained and demonstrated better than EVERY SINGLE other tutorial I've watched. I've applied and removed the medium and paint 3 times already. I just couldn't get it. Then I watched your video. So helpful! THANK YOU!!
I’ve watched this video about 10 times in the last week. I’m starting my first cup tomorrow with the crackle look! let’s hope I can get crafty enough! Thanks for such an easy to understand video.
Really enjoy watching your videos! ❤️ I know they sell a lot of designs for water slide, but do you know how we can create designs ourselves? Can't wait to see your next video!
Can Mod Podge be used in place of Elmers School glue? Maybe watered down a little? I bought the Elmer’s Glue-All Extra Strong Formula which doesn’t work!
Royal Elements Printable Vinyl for Inkjet Printers - 10 Waterproof Sheets - Dishwasher Safe www.amazon.com/dp/B07D7K96JJ/ref=cm_sw_r_cp_api_i_wObGEbZ5MGEKE
I notice you go all the way to the top of the rim and cover the bottom. I love your results and easy techniques! I watched other videos and the artists are very particular about taping off the top and the bottom. I know the Amazing Clear Cast is FDA approved. What are your thoughts on this??
I like the look of the tumbler being completely covered with the design. Others prefer the tape off. Either or is fine. But, if you aren’t taping off, make sure your epoxy is FDA approved and it’ll be okay
That’s a good question. I would imagine so, but I have never tried it. I would try it and if it doesn’t work then strip the tumbler with a rag and some acetone. It’ll be easy to remove the glue and paint
I love your tutorials because you always explain it in detail so it makes it easy following along. Your cups always turn out great. Thank you
You explained and demonstrated better than EVERY SINGLE other tutorial I've watched. I've applied and removed the medium and paint 3 times already. I just couldn't get it. Then I watched your video. So helpful! THANK YOU!!
Best Crackle tutorial I've seen. Using a glittered and epoxied cup I followed along and it looks PERFECT. Thank you!!
Instablaster...
I just used this method on a tumbler for the first time, and it worked beautifully! Thank you!
Gorgeous tumbler!!! Great job!!
Great method!! Love it with the sunflowers!! 🌻🌻 Awesome shirts! 🌈🌈
I love this method, I can't wait to try it!!! Love your tumbler; it's SUPER cute!!!
What printer do you have. That is magnificent.
Muchas gracias justamente lo que necesitaba!!! Aunque casi no entiendo el inglés lo explicaste a la perfección !!!! Gracias!!!
I just tried it & it worked 😍😍
Awesome!!!
As always the best tutorial!❤❤❤
question- if u don’t get much crackle after dried - can u apply glue and paint over the other layer ??
I’ve watched this video about 10 times in the last week. I’m starting my first cup tomorrow with the crackle look! let’s hope I can get crafty enough! Thanks for such an easy to understand video.
Do you with inkjet have to seal printable vinyl.? Love the rustic look.
Do not have to seal printed vinyl
@@MissKissKreations thank you
Really enjoy watching your videos! ❤️
I know they sell a lot of designs for water slide, but do you know how we can create designs ourselves? Can't wait to see your next video!
Thanks, this was very helpful!
Could tacky glue but used in the place of school glue?
Can I add glitter under the crackle?
If yes, would I do a layer of mod podge , glitter, then the glue and then acrylic paint?
Which spray paint do you suggested to use?
Love this! Would the effect only be truly noticeable using white acrylic paint?
The effect can work with any color. As long as you have two opposite colors. 😁
Can Mod Podge be used in place of Elmers School glue? Maybe watered down a little? I bought the Elmer’s Glue-All Extra Strong Formula which doesn’t work!
Love this video! Where did you get the printed vinyl?
Royal Elements Printable Vinyl for Inkjet Printers - 10 Waterproof Sheets - Dishwasher Safe www.amazon.com/dp/B07D7K96JJ/ref=cm_sw_r_cp_api_i_wObGEbZ5MGEKE
Cool technique
Thank you!
Can you use mod podge instead?
I notice you go all the way to the top of the rim and cover the bottom. I love your results and easy techniques! I watched other videos and the artists are very particular about taping off the top and the bottom. I know the Amazing Clear Cast is FDA approved. What are your thoughts on this??
I like the look of the tumbler being completely covered with the design. Others prefer the tape off. Either or is fine. But, if you aren’t taping off, make sure your epoxy is FDA approved and it’ll be okay
Miss Kiss Kreations thank you so much!! Your work is beautiful.
can I use Tacky Glue instead of the Elmers glue?
I’ve never used it with this method but it can’t hurt to try!
Do you know if the clear Elmer's glue will work the same for this effect? I have almost a gallon of that stuff on hand! 🤣
That’s a good question. I would imagine so, but I have never tried it. I would try it and if it doesn’t work then strip the tumbler with a rag and some acetone. It’ll be easy to remove the glue and paint
Could you glitter and epoxy than do the crackle? Like have base glitter underneath
Yes
Really cool
Thank you.
What program would you use to download an image, resize the image, then print on hp printer to make a waterslide?
I use my Cricut design space
Can I use clear Elmer’s glue
I have never used it. But I heard it works
If you’re able to chip it off with your finger how do you prevent that from happening when you epoxy?
I haven't done this method yet, but I'm assuming to just ensure that the glue is completely dry before epoxying it.
What if you added a color to the glue before putting it on the tumbler🤔?
That works too
If you dont have a heat gun, can you use a blow dryer?
It’s worth a try. I believe it may work, if you keep the cool setting off.
Can you use clear elmers glue?
Did you ever get your answer. i have the same question
Can you do a glitter background? Or would that look strange?
I think that would look nice!
I think it would look beautiful
How would you do the look with glitter? Sounds neat!
Epoxy is not for me.i just cant get it right.can i use mod podge as a sealer?
No you cannot unfortunately. It will not be permanent
Try brite tone
What kind of printer do you use ?
I bought a $20 canon from Walmart
Can you make a tutorial creating waterslide decals
Would that also be called a stress look...
Yes
Will mod podge work instead of glue