ThinBlueSixxer well then his neighbors are dope then my neighbors are cool with me now but I’m taking a page out of dans book and am teaching myself to fix my truck when I need or want to replace things an I’ve been using a grinder lately and my neighbors are starting to get annoyed but they don’t cause trouble
So happy to see a video on the car! It’s been my dream car since I was 8 years old, 20 years later and I still look at these cars. Btw the horn going off killed me 😂
I'm seriously jealous. My first car was a '71 SS and still think they are the sexiest Camaro to ever roll off the assembly line. The previous owner of mine had done a rebuild to stock '71 LT-1 specs(330HP). After spinning a bearing I redid the engine senior year of HS to slightly better than '70.5 LT-1(360HP) specs. 10:1 flat top pistons paired with ported/polished/angle milled Edelbrock heads for 11:1 compression on pump gas, converted to full roller valvetrain with a slightly bigger than '70.5 LT-1 solid roller cam, single plane Edelbrock intake, 750 Holley, 1 wire HEI distributor, full length Hedman 1-5/8 stainless headers, 3" stainless H-pipe/"cherry bombs"/tail pipes. Probably way more car than any 17 year old should be allowed to drive, but damn it was fun.
I LOVE these restoration and modding videos Dan makes! I learn a lot from them, they're a lot of fun to watch, and it gives me ideas for future builds.
Now that I think about it, all the DIY stuff you've been doing lately (last 8-ish months?) really makes the name *Do It* With Dan more accurate than ever before in a way.
You catch the occasional comment on dans insta from Matt and its my favorite youtuber freindship ever. If both of them collab with cletus i will die a happy man
The steering wheel and the plate add so much I love it. The camera resetting to 24 fps was a little hard to watch but I can't get enough of these build videos
You just did that piston-firing explanation to show off those gains, right xD Loving the direction this channel is going in. From Wheelie Practice back in the day, to changing steering wheels. Much Diverse, such wow.
Honestly this is my favorite channel on youtube, your real about everything and admit when you make mistakes like the bumper, I feel like your a good person to relate to and I know your a hell of a youtube, you deserve more subs then this
Dan I recommend if your gonna keep that motor in it for awhile, throw a set of super nice spark plugs on it, and upgrade the intake, carb, and breather and some ebay longtube headers that’ll make a good bit of difference in the powerand make it look and sound a lot better. I’d also swap the valve covers to something nice looking instead of everything painted same color but that’s just me! Keep up the good work I love the car!
That car seems like based off the spark plugs you showed us it has or is running rich causing the plugs to foul. While increasing total timing helps it only helps in the way that with more timing its able to be more efficient with the air and fuel it gets which can slightly improve performance but wont make it 100%. Those little 2 barrels can be troublesome with the common rich condition issue as they can be hard to tune. If I were you id source a little 500 or 600cm 2 barrel holley to put on the factory intake if you want to keep it orginal. This will offer much more performance out of that little 350 and more tuneability. Another helpful thing as with timing is to get whats called a dialback timing light and set TOTAL TIMING at 34 degrees. Hope this helps! Love the vids!
Great looking Camaro Dan! excited to see how it will be once you're all done with it. Another note at least we all now know your dog get's all your money.
Beautiful car Dan! I, like you, have always wanted one of those. Something that will help driveability, try to run gas with no ethanol in it. Will be watching episodes on this one for sure!
Dan, I got a ridge wallet a while back when you first did an ad for them, I love it! Went with a black titanium. Use it every day and it's my only wallet now, super slim!
So I also used to gap spark plugs like that, but I learned the hard way that if you have platinum or iridium plugs, sliding the plug along the disc to widen the gap will shear the electrode right off.
I would only use that method of gapping spark plugs on older copper plugs like I'm sure that car uses. Newer iridium or platinum plugs have a small protruding electrode that can be easily broken off if you use a wedge to gap them. Other styles of gappers have a cutout to bend the grounding terminal in or out so you don't come in contact with the small piece of iridium or platinum. Just a consideration.
Probably wouldn't hurt to check the gap and dwell on the points. Also looking at the way the headlight beam pattern on side of the 1LE it appears you have the highbeams wired to the low beam circuit. Some aftermarket headlights use the H4 pin out which has swaps the high and low wires I had this issue when I did a Hella H4 conversation on my 87 Camaro. I had to use the adapter that came whit them.
The mechanic side of me hopes you learned to disconnect the battery when youre messing around with your steering wheel next time, but having watched your videos for years now i know that you didnt lol
you would only disconnect the battery if the steering wheel has an airbag. which that steering wheel does not have. he could have easily disconnected the battery to avoid the annoying honk. but... youtube content. it was funny as shit.
The LED lamps are better than I thought they would look. I had a baby blue 78 Camaro, 305 with the 3 speed. The doors eventually would not open so I just left the windows rolled down and we would slide in dukes of Haz style.
Cylinders are all numbered. On v8’s one side of the engine will be slightly offset to the front of the car to allow room for connecting rods. The front most piston is #1 and starting front to back on that most upfront side of the block the cylinders are 1,3,5,7. Same goes for the other side but it’s 2,4,6,8
@@strawsparky33 that's exactly what I would do what are you talking about did u read my post. I said I want to swap the 454 badges and put 572 badges on it with a 572 engine in it
Dan the way youre gaping spark plugs is actually incorrect when you gap a plug you aren't supposed to gap by the tip on those coin style gapping tools you are supposed to gap with the hole in the tool not by sliding it along the ridges on the edge aren't for gapping because the actual electrodes are tipped and gapping by forcing on the electrode will degrade the coating giving decreased performance you don't want to gap by the electrode but by the physical arm that holds the electrode Chris fix has a great video on gaping spark plugs (ruclips.net/video/m_ZsWQ_WXNo/видео.html) hope this helps... glad to see you finally having your dream car
@@_Glockyy_ no because you can damage the plating on the electrodes... Like for example a platinum plug isn't solid platinum (obviously) but the electrode has a platinum coating so when you apply force to the electrode it can damage/ remove that coating ruining the plug
Should have shown everyone where the gas tank fill spout is....(its its in the back of the car behind the plate, thats why it flaps down like that..for those that didnt know.. LOLZ) I LOVED that about my 77 Trans Am! Does your high beam switch sit on the floor board???
I love when I'm working on something and can't get it. Then I look up a ton of stuff and go, screw that. And just give it a solid pull till it works. Dan at 5:08 is my hero
I noticed the old ignition coil at 21:54 . How about a future video showing you remove that old coil and points distributor and replace them with a nice MSD Coil and HEI distributor ?
Dan I’m so happy you got this car you always smile when your around it and it really improves your content. I’m currently eating takeout sushi in bed (I know I’m sad) watching on PS4 but wanted to comment so I grabbed my phone lol. Nice video can’t wait to see what the MARO turns into 😂
You should throw a wide band O2 sensor and air/fuel gauge in...then get someone to jet the carb...it sounds like it is stumbling when hitting the gas... Plus it that car sat for awhile the plug wires might need replaced...check cap and rotor too... check all your vacuum lines for leaks...run some kind of fuel additive to clean the carb...could be gummed up from sitting too....maybe change the small fuel filter in the carb right behind where the fuel line goes into the carb. Notice it smoking...like blue smoke...oil burning...those engine are known for the valve seals going bad...especially if it sat...which could explain the 3 fouled plugs...and with the low mileage I doubt it was rebuilt.
Get an under hood liner/insulation ASAP to protect your paint from engine heat!!!! National Parts Depot has repro parts for CHEAP and they have EVERYTHING I use them for my 70' SS/RS
Dan you inspired me to go out and purchase my dream car a 1984 z28 camaro! It’s a bit of a project but I’m looking forward to all the headaches and cut up knuckles to make it mine. Keep grinding dan
Hey Dan, keep up all the great work. Those losers that bitch about car/truck, they aren’t watching for the personal connection. I have learned far more about you as your content expands. Plus I like cars and trucks and motorcycles and guns and knives flamethrowers and welding. I guess the only people that like the expanded content are men. 🤷🏻♂️ Love watching you bring your dreams to fruition. It’s very inspirational.
Poor neighbors during the steering wheel install lmao
I was honestly waiting for Laura to come out and be like "WHAT THE FUCK DAN"
they already hate him that just puts the cherry on the fuck you Sundae Dan serves to his neighbors daily
@@GREGtheDUCK44 actually if I remember right the place hes at now hes pretty cool with his neighbors.
ThinBlueSixxer well then his neighbors are dope then my neighbors are cool with me now but I’m taking a page out of dans book and am teaching myself to fix my truck when I need or want to replace things an I’ve been using a grinder lately and my neighbors are starting to get annoyed but they don’t cause trouble
He can be my neighbor. Straight pipes, and an air horn. I win beeatch😂
"" you gotta listen to some AC/DC"" proceed to put on modern rap 😂
Andrei Gusta yeah n it wasn’t even good rap lol
@@judekiv you heard 3 seconds of it dude how do you even know
Wesley Williams cause I know that song n in my opinion it isn’t good 😂
JudeINC : ooohhh
JudeINC same dude 😂
your dog is just chilling inside trying to take a nap thinking what is that idiot doing with the horn
So happy to see a video on the car! It’s been my dream car since I was 8 years old, 20 years later and I still look at these cars. Btw the horn going off killed me 😂
Dan your neighbors had to be absolutely FUMING. All that hornage😂😂
I'm seriously jealous. My first car was a '71 SS and still think they are the sexiest Camaro to ever roll off the assembly line. The previous owner of mine had done a rebuild to stock '71 LT-1 specs(330HP). After spinning a bearing I redid the engine senior year of HS to slightly better than '70.5 LT-1(360HP) specs. 10:1 flat top pistons paired with ported/polished/angle milled Edelbrock heads for 11:1 compression on pump gas, converted to full roller valvetrain with a slightly bigger than '70.5 LT-1 solid roller cam, single plane Edelbrock intake, 750 Holley, 1 wire HEI distributor, full length Hedman 1-5/8 stainless headers, 3" stainless H-pipe/"cherry bombs"/tail pipes. Probably way more car than any 17 year old should be allowed to drive, but damn it was fun.
I LOVE these restoration and modding videos Dan makes! I learn a lot from them, they're a lot of fun to watch, and it gives me ideas for future builds.
Now that I think about it, all the DIY stuff you've been doing lately (last 8-ish months?) really makes the name *Do It* With Dan more accurate than ever before in a way.
Wait diwd goes through demo ranch for his merch? Sweet
You catch the occasional comment on dans insta from Matt and its my favorite youtuber freindship ever. If both of them collab with cletus i will die a happy man
Make the collab happen!
@@Darthjammer224 Dan needs to go help Cleetus install that starlight headliner in the galaxy
@@Darthjammer224 dude I will literally kill someone to see Matt Dan and cletus McFarland do a collab
Yeah, Dan has been on demolition ranch.
Buy a MSD high voltage coil for HEI it will run a lot better
He mentioned in a previous video that he will be doing a ls3 swap. He's going to save the old engine though, since its numbers matching
fouled plugs, smoky exhaust, occasional back fire... may wanna look for an oil leak. valve seals, intake gasket, rings.
New Merch looks great Dan! Hope the partnership is going good!
Nobody:
Dan:(gets shocked) yaaaaa let me do it again 😂
Also, should get some blankets for the fenders for when you are leaning into the engine bay. Protect the paint
The steering wheel and the plate add so much I love it. The camera resetting to 24 fps was a little hard to watch but I can't get enough of these build videos
So glad to see that you have partenered with bunker branding, i still think you and Matt should do a gun video together though
You definitely need to do more old car videos like this I love them!
When Dan's happy making a video, I'm happy watching it. Love the evolution of your channel.
Gotcher self a pretty good little oil leak there dan
This channel make automotive 2 class so much easier. Thank you Daniel Yezzir
You just did that piston-firing explanation to show off those gains, right xD Loving the direction this channel is going in. From Wheelie Practice back in the day, to changing steering wheels. Much Diverse, such wow.
18 degrees BTDC.
I dig the car, glad you got a split bumper conversion. Looks great.
Perfect upgrades:
Chromemoly full-legnth frame tubes.
Slightly narrowed Dana 60 rear.
Richland gear T-56 Magnum trans.
800ci mountain motor w/Arias Hemi heads.
Maybe an enormous twin-screw blower...
😁😁😁😁😁😁😁😁😁
Honestly this is my favorite channel on youtube, your real about everything and admit when you make mistakes like the bumper, I feel like your a good person to relate to and I know your a hell of a youtube, you deserve more subs then this
Dan I recommend if your gonna keep that motor in it for awhile, throw a set of super nice spark plugs on it, and upgrade the intake, carb, and breather and some ebay longtube headers that’ll make a good bit of difference in the powerand make it look and sound a lot better. I’d also swap the valve covers to something nice looking instead of everything painted same color but that’s just me! Keep up the good work I love the car!
That car seems like based off the spark plugs you showed us it has or is running rich causing the plugs to foul. While increasing total timing helps it only helps in the way that with more timing its able to be more efficient with the air and fuel it gets which can slightly improve performance but wont make it 100%. Those little 2 barrels can be troublesome with the common rich condition issue as they can be hard to tune. If I were you id source a little 500 or 600cm 2 barrel holley to put on the factory intake if you want to keep it orginal. This will offer much more performance out of that little 350 and more tuneability. Another helpful thing as with timing is to get whats called a dialback timing light and set TOTAL TIMING at 34 degrees. Hope this helps! Love the vids!
Great looking Camaro Dan! excited to see how it will be once you're all done with it. Another note at least we all now know your dog get's all your money.
Beautiful car Dan! I, like you, have always wanted one of those. Something that will help driveability, try to run gas with no ethanol in it. Will be watching episodes on this one for sure!
Dan, I got a ridge wallet a while back when you first did an ad for them, I love it! Went with a black titanium. Use it every day and it's my only wallet now, super slim!
You trying to put on the steering wheel made my day, keep up the good content. The 77 Camaro is my dream car
2:40 That flook looks mighty dope in the reflection
So I also used to gap spark plugs like that, but I learned the hard way that if you have platinum or iridium plugs, sliding the plug along the disc to widen the gap will shear the electrode right off.
The Joy's of old cars! Easy as hell to work on haha
Get a layer of protection on the headlights, the housings scratch easy on those. I just did 35% tint but you could go lighter it’ll save you later on
I would only use that method of gapping spark plugs on older copper plugs like I'm sure that car uses. Newer iridium or platinum plugs have a small protruding electrode that can be easily broken off if you use a wedge to gap them. Other styles of gappers have a cutout to bend the grounding terminal in or out so you don't come in contact with the small piece of iridium or platinum.
Just a consideration.
My father has a 77 Camaro and I have fond memories of that car. Yours is awesome, love the color.
That driveway lineup is a fucking colorful array of beauty. Love it. Inspiring.
Probably wouldn't hurt to check the gap and dwell on the points. Also looking at the way the headlight beam pattern on side of the 1LE it appears you have the highbeams wired to the low beam circuit. Some aftermarket headlights use the H4 pin out which has swaps the high and low wires I had this issue when I did a Hella H4 conversation on my 87 Camaro. I had to use the adapter that came whit them.
omg i laughed so fucking hard with the horn going off while tightening those screws down xD
The better the mullet gets the better Dan's projects get
I wish i could like a video more than once, I tried like 3 times lol. Love the camaro man. Can't wait to see what you're gonna do to it!
The mechanic side of me hopes you learned to disconnect the battery when youre messing around with your steering wheel next time, but having watched your videos for years now i know that you didnt lol
I mean to be fair there’s no airbag in there
@@brendana9942 yes, but that horn is still annoying as fuck
you would only disconnect the battery if the steering wheel has an airbag. which that steering wheel does not have. he could have easily disconnected the battery to avoid the annoying honk. but... youtube content. it was funny as shit.
@@bromando44 thats what i said 🤦🏼♂️
Omg the horns going to blow up on him
The LED lamps are better than I thought they would look. I had a baby blue 78 Camaro, 305 with the 3 speed. The doors eventually would not open so I just left the windows rolled down and we would slide in dukes of Haz style.
9:40
Dan.... get you a set of REAL feeler gauges for gapping your plugs. Definitely worth it in my worthless opinion.
Cylinders are all numbered. On v8’s one side of the engine will be slightly offset to the front of the car to allow room for connecting rods. The front most piston is #1 and starting front to back on that most upfront side of the block the cylinders are 1,3,5,7. Same goes for the other side but it’s 2,4,6,8
I dont even mind sponsors anymore cuz dan makes em enjoyable 😂
One of my favorite youtubers getting his merch done through another favorite youtuber’s company
Congrats man. Love the tag and love the car. Most deserved. Keep up the grind.
My dream car is a 1970 Chevelle SS 454 but I want to change the 454 to a 572 and get 572 chrome badges for it amd swap out the 454 badges.
Why not just actually put a 572 in it? Instead of faking it?
@@strawsparky33 that's exactly what I would do what are you talking about did u read my post. I said I want to swap the 454 badges and put 572 badges on it with a 572 engine in it
@@CadillacJak read it wrong. Sorry
@@strawsparky33 lol it's all good that 572 would be sweet but damn its expensive
CadillacJak I have a 454 Chevy and it’s fast lemme tell ya
YEET finally on Bunker branding!! Can't wait for you to come to Texas again!!
Bunker Branding is doing your merch!! You totally need to get with Matt and do a DIWD/Demo ranch video where you blow shit up!!
Dan the way youre gaping spark plugs is actually incorrect when you gap a plug you aren't supposed to gap by the tip on those coin style gapping tools you are supposed to gap with the hole in the tool not by sliding it along the ridges on the edge aren't for gapping because the actual electrodes are tipped and gapping by forcing on the electrode will degrade the coating giving decreased performance you don't want to gap by the electrode but by the physical arm that holds the electrode Chris fix has a great video on gaping spark plugs (ruclips.net/video/m_ZsWQ_WXNo/видео.html) hope this helps... glad to see you finally having your dream car
If it works it works doesn't it?
@@_Glockyy_ no because you can damage the plating on the electrodes... Like for example a platinum plug isn't solid platinum (obviously) but the electrode has a platinum coating so when you apply force to the electrode it can damage/ remove that coating ruining the plug
Is it just me or did the passenger running light/turn signal go out when he turned his headlights on?
It seemed to
I got a nice 92. Glad you got the Camaro man it’s BEAUTIFUL
Should have shown everyone where the gas tank fill spout is....(its its in the back of the car behind the plate, thats why it flaps down like that..for those that didnt know.. LOLZ) I LOVED that about my 77 Trans Am! Does your high beam switch sit on the floor board???
Badass. I cant wait till I can have a driveway like you lol. SOON.
I love when I'm working on something and can't get it. Then I look up a ton of stuff and go, screw that. And just give it a solid pull till it works.
Dan at 5:08 is my hero
I enjoyed your video you bring back a lot of memories I grew up with that car. Nice car Dan.
Its looking great! My dream car is the Bandit Firebird. Will be watching these videos.
Favorite build series so far. 10/10
I own a 3rd gen camaro, i love your choice of car to bring to the channel, thank you dan
You should use a gapping tool with the loop for bending the ground electrode instead of wedging that against the soft copper.
That wood steering wheel was the perfect touch, that car is awesome
Dan's 5 minutes of horn play was played on full blast in bumper to bumper traffic today on my way home from work 🤣 thanks dan.
The ragtime music was utilized perfectly.
This was a great watch, I like the custom parts it's not too modern.
Great video. Thanks for sharing. I have an all original ‘71.
I noticed the old ignition coil at 21:54 . How about a future video showing you remove that old coil and points distributor and replace them with a nice MSD Coil and HEI distributor ?
Are you planning to change the front indicators ? If yes then something matching to the new LED headlights would look amazing.
Dan I’m so happy you got this car you always smile when your around it and it really improves your content. I’m currently eating takeout sushi in bed (I know I’m sad) watching on PS4 but wanted to comment so I grabbed my phone lol. Nice video can’t wait to see what the MARO turns into 😂
You should throw a wide band O2 sensor and air/fuel gauge in...then get someone to jet the carb...it sounds like it is stumbling when hitting the gas...
Plus it that car sat for awhile the plug wires might need replaced...check cap and rotor too... check all your vacuum lines for leaks...run some kind of fuel additive to clean the carb...could be gummed up from sitting too....maybe change the small fuel filter in the carb right behind where the fuel line goes into the carb.
Notice it smoking...like blue smoke...oil burning...those engine are known for the valve seals going bad...especially if it sat...which could explain the 3 fouled plugs...and with the low mileage I doubt it was rebuilt.
Love 2nd gen F Bodies sick 73’ Camaro. I’ve got a sweet 1970 Pontiac Firebird 🤘🏽
Be sure to adjust the headlights with the screws on the inner bezel
Love the vids man 👌🏼👌🏼 my dad has a 69 and a 73. Never got to see them but fell in love with them. Great content
Congratulations on ur dream car Dan! It’s already all comin’ together to your liking......noice👌🏻
You should let the headlights like they have been. Classic is the best 🤤
It's his car let him do what he wants with it
I like the original headlights also like the yellow lights personally I dont care if it's less bright
SHELLAC! Man I love this car! ALso all adverts should be made the same way yours are I'd actually watch them then :D
that little laugh he had after he discovered it shocked him killed me😂
I feel like you gotta listen to Chris Stapleton when driving that car
@3:38 when dan said shalat i felt that
Get a fiberglass hood it will be very light. And long tub headers, on older cars it makes a big difference
A carbureted fuel injection kit would help with the throttle response
But during the winter it’ll be fine starting and no waiting for the car to heat up
The steering wheel install was funny! When I put a new wheel in my c10 I disconnected the battery immediately cause I couldn't stand it
This is how many people like the CAMARO!!
👇👇
Dan needs to do a collab with demolition ranch since he gets his mercy through bunker branding now😂👌
Awesome Dan! Same lights I have to install! Looks super easy! Makes a change from chasing vacuum leaks on it! 😂😂
Get an under hood liner/insulation ASAP to protect your paint from engine heat!!!! National Parts Depot has repro parts for CHEAP and they have EVERYTHING I use them for my 70' SS/RS
Honestly kind of my dream series since I want to purchase an old muscle car in the future for myself. Please more content
edelbrock pro flo filter tossed one on my 89 camaro with 305 TBI made a world of difference
Dan I love my ridge wallet. Got the carbon fiber one too. 10/10 would recommend to anyone
all wanting dan to drop in a 632ci big block from blueprint engines say: YEET
YEEEEEEEEEEET
YEEEEEEEET
YEET
Dan you inspired me to go out and purchase my dream car a 1984 z28 camaro! It’s a bit of a project but I’m looking forward to all the headaches and cut up knuckles to make it mine. Keep grinding dan
Hey Dan, keep up all the great work. Those losers that bitch about car/truck, they aren’t watching for the personal connection. I have learned far more about you as your content expands. Plus I like cars and trucks and motorcycles and guns and knives flamethrowers and welding. I guess the only people that like the expanded content are men. 🤷🏻♂️ Love watching you bring your dreams to fruition. It’s very inspirational.
To stop the horn going off in the future, disconnect the battery when you install the steering wheel!
Get a rs or z gauge cluster...and keep the hood hinges clean and lubed..if one binds it could jack your hood up
Invest in a nice set of switchback running lights. Ive been nothing but impressed with mine
love how youre getting better at editing
LED turn signals and taillights next? possibly fog lights?
Congrats again dude, thats one hell of a car!
Hey Dan, just FYI those sumic GT's are a really cheap tire, you might want to replace them with something that's a higher quality
"Right here is my unit and now all I gotta do is pull it out."
Phrasing. By the way the '73 sounds SO much better now that you fixed the timing.