The two most popular ways to install a stud snap into a solid surface are: using a 3/8" screw stud #333105 OR by using the SnapRite Surface Mount Stud Die #103754 with a Blind Rivet #103756 then a Stud #333100. Visit: sailrite.com and enter the part numbers for more information.
Step 1= squeeze the handles of the rivet tool together to withdraw the internal pulling jaws. Step 2= Thread the die onto the rivet tool until it is fully seated; then release the handles. Q1= Are the mandrels just finishing nails?
They should screw into a standard rivet tool, not sure about a lever-handle rivet press. If a standard rivet tool die fits in your rivet press, then yes it should work.
6:35 How exactly do you install the stud into a hard surface? I want to install the stud onto the top of a plastic kayak; the snap will be attached to some spray skirt materials....help. thanks.
![Eminem - Fuel (Shady Edition) feat. Westside Boogie & GRIP [Official Audio]](http://i.ytimg.com/vi/k1OquBida9s/mqdefault.jpg)
The two most popular ways to install a stud snap into a solid surface are: using a 3/8" screw stud #333105 OR by using the SnapRite Surface Mount Stud Die #103754 with a Blind Rivet #103756 then a Stud #333100. Visit: sailrite.com and enter the part numbers for more information.
PHUCK OFF
Step 1= squeeze the handles of the rivet tool together to withdraw the internal pulling jaws.
Step 2= Thread the die onto the rivet tool until it is fully seated; then release the handles.
Q1= Are the mandrels just finishing nails?
Answer: Yes, but they are stainless steel mandrels that have been tested to not break prematurely.
You never go button to button
Can these dies be used with a standard thread lever-handle rivet press?
They should screw into a standard rivet tool, not sure about a lever-handle rivet press. If a standard rivet tool die fits in your rivet press, then yes it should work.
Will this work on leather or will it Jack it up
Yes, it will work with leather
Will it work on "Better than Teak" marine flooring?
Yes, it will. We have used it with Infinity Luxury Woven Vinyl™ Flooring.
6:35 How exactly do you install the stud into a hard surface? I want to install the stud onto the top of a plastic kayak; the snap will be attached to some spray skirt materials....help. thanks.
Go to the hardware store they have button snaps with a screw in the Center of the stud that mounts to hard surface
i know it is kind of randomly asking but do anybody know of a good place to stream new movies online?
@Jaime Johnny I use Flixportal. Just search on google for it :)
@Leighton Paxton Thank you, I went there and it seems to work :D I really appreciate it!
@Jaime Johnny No problem =)