I Bet You Didn't Know About These Mr. Heater Hacks
HTML-код
- Опубликовано: 4 фев 2024
- Mr. Heater Big Buddy: amzn.to/47Ho94p
Refill hose: amzn.to/3ulN2F8
All my favorite HVAC tools: www.amazon.com/shop/thediyhva...
#1 Source for HVAC equipment: hvacdirect.com
Use my discount code X17AYSRVNGN8 for an extra 3% off!
IF YOU ARE IN NEED OF GUIDANCE WITH YOUR HVAC SYSTEM, whether it is diagnosing a bad part, replacing your system, or help with sizing, check out our membership program here: / diyhvacguy
For a low price of $200, you will get assistance from myself when it comes to your hvac needs, whether it's sizing, diagnosing, or locating the correct equipment.
Here Is Where I Order All My Air Filters:
filterbuy.com/qYEa1J0knccjlwe...
Follow us for more diy hvac tips & to enter for our giveaways!
Instagram: / diy_hvac_guy
Tiktok: www.tiktok.com/@diy.hvac.guy?...
Facebook: / selfmadehvac
⚠️ Disclaimer:
This video is for educational purposes. Any and all HVAC repair work is done at your own risk. Any person attempting to deal with any type of refrigerant MUST have their EPA 608 certificate. The DIY HVAC Guy channel is not responsible for any possible damages or injuries caused by the use or misuse of the provided information.
The DIY HVAC GUY is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
Learned something new again. I have owned a Snozzle for quite a few years. I didn't know about the trick to let out air. I also like the hose. Just bought one off your link. Great job again.
Do not use any generic hose, only use Mr Buddy hose or the oils from cheap hoses will leech into the internals of the heater and cause all kinds of problems.
I would note that yes, you can use these indoors and while they do likely produce some trace amounts of CO, they're safe. It even mentions this in the documentaion for these heaters. The reason is that they have a very complete burn and most of the byproduct is water vapor. I've blasted mine in an enclosed space right next to a CO detector and its never registered anything.
You note that you can turn it down between low and pilot. I wouldnt do that. Just because it may not be burning as cleanly and completely as it could be - thus more risk of CO. Just a guess.
I believe you, ive also read that co detectors are not set to alarm until high levels are detected, it was just a warning. The original video no one mentioned cracking a window open or co detector, which everyone in there comments mentioned. It may be common knowledge for some people. Some others might not know. Is there an issue with adding a warning? This arguing is silly. It was just for people who may not know. Why learn the hard way? The risk is losing your life. I dont see an issue with a warning
It is not a matter of how complete combustion is. Its a matter of running out of availble oxygen for combustion. Once you consumed all of the oxygen in a space you will start to use the CO2. Then you will make CO since CO2+C->2CO. Anything that consumes oxygen for combustion will do this. You need adequate ventilation to ensure a oxygen supply. Just open a window a bit.
That fan is pretty cool!
All fantastic ideas, Thank You
Another Great Video....:) I don't comment often, but I don't miss a video and your Channel has grown tremendously....:) Good Work. Another thing you can do to release the air from the Tank is take a pair of 90 degree elbow pliers and pull up on the little valve pin that looks like a tire valve while filling until you see propane coming out and that should give you a Full 1lb. Tank....:) Take care and keep up the Good work 👍.
Thank you so so much for the support. I truly means a lot when people watch my videos. I’m always open to new video ideas so make sure and comment if you’d like to see something In particular! Cheers
Really good to know, thanks for commenting and sharing.
You're right. These things are truly invaluable!
Ty sir
Excellent info, thanks!
Good stuff as always! Thanks, Dave!!
Great information. Thank you.
Good stuff. Thank you.
Excellent, good stuff.
It's cool to see how this works with the regular 1lb propane cylinders for refilling. I like Flame King's refillable 1lb cylinders and the refill kit they make to go with them. I purchased 4 so I can fuel my Big Buddy inside, have 2 backup cylinders, and then refill them with a 20lb cylinder as needed. If I wanted to use a 20lb propane cylinder inside I'd likely try to run a ~12 foot propane cord through a window and place a pool noodle in the window jamb to help seal it a little and lessen pressure on the cord.
I'm tempted to install a direct vent Martin propane heater for backup heat without the ventless propane issues, but in the mean time my Buddy and Big Buddy heaters are great for outside and as a backup inside if I'm not using a generator to power my heat pump or electric space heaters. Hopefully everyone has carbon monoxide detectors.
if you get the 1lb bottles real cold they tend to take on more gas. those little heaters are awesome.
True statement! Weigh the bottles between frozen and ambient temp bottles after filling..
Don't forget to use CO detectors in the room it's being used in. Better safe than sorry.
Great tips! Id really go for the 1 pound bottles that are actually made to be refilled. They are more heavy duty
Propane cylinders are never filled completely, only to 80% full. If you bleed too much air out and fill too full of liquid you risk a tank rupture if it ever gets hot (left in a hot car for example).
I would recommend STRONGLY against topping-off the small cylinders. If you’re going to fill them just do it partially and do it more often.
The other BIG problem with refilling the small tanks is moisture. If you don’t purge the line and valve first, you’re putting air and water Vapor into the cylinder which can corrode and weaken it, just like if you don’t drain an air compressor tank.
I believe in reusing things where it makes sense, but holy heck, if you’re going to do this you need to understand the risks!
is luxor sponsoring you now? you are true business man!
This is great Dave! Do you kno how we can similarly fill up our 20lb propane tank from our large 500? Lb tank that fuels the house? Do you kno the adapters and hoses? Is there such a thing?
I got one last year for my Jeep. FIY they don't work very well in automobiles in the winter. Fogs up the winders. 🙃
Around here, you can't have the 1 lb bottles refilled anywhere -- you're supposed to recycle them, but they have to be completely empty first or the recycling places won't take them. So they tend to just get thrown out, which is crazy. I'll definitely refill mine.
Do you feel save using the 20lb propane tank inside? On the box it warns never to do this. I would refill the smaller canisters if using heater inside.
So much he missed here,
Yes the big tanks are required to be left outside.
I've used mine in the house with a 20lb tank but with a filter many times over the years in my house when the power goes out in the winter and obviously no problems or I most likely wouldn't be posting this just have to make sure everything is good and tight just like you have to do with the little tanks
Yes I feel it’s safe but it’s Illegal so I didn’t want to really promote that.
Propane is more dense then air and it will pool if it leaks. You cant see a leak but the odourant added makes it pretty obvious most of the time... as long as your there to smell it. If you have a basement it will pool down to there. If you do have a basement it likely has your hot water heater and furnace in it. These are sources of ignition.
If you ever go into an underground parkade you will see signs stating "No Propane Vehicles allowed". This is would be why.
RE: Air removal: Couldn't you just momentary-bleed the hose from the 20Lb tank (not inverted) prior to connecting to the 1Lb tank for filling?
Do you have a link for the fan ?
Great Information could you please send a link to the hose and adapter that you used in this video to refill the smaller tanks from a 20 lb tank. Thank you.
It is in the video description 👍🏼
@@diyhvacguy Okay, thanks. I wasn't wearing my glasses.
@@diyhvacguy Are the links working for you? The aren't for me. Both come back as an PR_END_OF_FILE_ERROR. The link to your store works just fine, though.
Is it okay to refill the 1 lb tanks from a 100 lb cylinder? Thanks
Where did you get the hose to refill the one pound bottles from a 20 lb. tank? Thanks
amzn.to/3ulN2F8 It’s also in the video description in case anyone else needs to locate that 👍🏼 cheers
If your Buddy starts having problems staying lit, I used the isopropyl alcohol fix and it worked for me. Although once it clogs, it easily re clogs so it turns into a maintenance chore. I'm just one data point but here is my experience: I ran my Big Buddy 2-3 hours per day for about 6 months using a 20 pound bottle WITHOUT a filter before I started having problems. I've run my regular sized Buddy for two years WITH a filter and have never had a problem. Maybe your mileage will vary.
If you use the mr.buddy hose you don’t need a filter. They have a patent on the hose. Use a filter if you use any other hose type
@@rogervaillant6044 I should have mentioned that! I used non Mr. Heater hose for a few months then switched to a Mr. Heater Hose but either that is marketing or I think the damage was already done and now, its just "in there".
I have a big buddy,lasted one season,think its plugged of something,not sure its worth my time to mess with it! Nice unit when it worked
Did you use a hose with out a filter?
Only certain hoses are rated to be used without filters.
@@Glocktard nope,just 1lb bottles
The instructions specifically state: Never set control knob between locked positions. Poor combustion & higher levels of carbon monoxide may result. Just sayin'.
I would suggest to use soapy water and spray / pour over the valve to check for leaks - I had a couple that leaked - when I went to use it - it was empty if it leaks - just use the small screw driver and “ pop “ it a few times to. “ re seat “ the valve - then check it again with soapy water
you should be using a low pressure regulator off the 20lb. tank threw hose into regulator built in buddy heater. its used as a filter and keeps a max pres of 5 psi on rubber hose, not 250 to 300 psi on rubber hose. good video.
Yeah, please add that link for the hose for the smaller tank from the 20lb tank..........
It’s in the video description 👍🏼 cheers
@@diyhvacguy got it! thank you. great video!
Keep the 20 pound cylinder, relatively warm, and put the 1 pound cylinders in the freezer before filling. I think you can get more in that way.
Sad that you don't answers questions or for that matter read the comments.. I've submitted the same questions several times! SHM
Dude there's a quick connect on the left side. No filter needed.
General comment for those that live in more fascist states where the cops can be picky. It is illegal to transport a refilled 1-lb cylinder in a vehicle. How do you prove it has been refilled? That would be tough. However, you may want to leave the rusty ones at home when you take them away from your home. Love your stuff.
I never run mine on a 20lb tank without the filter if using a rubber hose
I don’t use a filter, but I have a hose with the regulator on the 20 lb tank side. Going on 4 years and no issues. I’ve read it’s the higher pressure on the non regulator side that causes the issue with rubber hoses requiring a filter.
Also I used the quick connector fitting in the Big Buddy.
Mr heater does sell a special hose to be used without needing a filter, I know I’ve bought two.
75° and sunny today. I don't think its heater season.
What about carbon monoxide poisoning? How long can you safely run it indoors?
Indefinitely. These are designed for safe indoor use. Still a good idea to have a CO detector / alarm.
have 3..instruction dictate 9 sq inch opened window...really small...
They make refillable 1 lbs tanks. The disposable ones are just brazed together. Look how rusty yours is. Refilling these is just being cheap.
ThumbUp &Comment 4AIgos
I'd be careful refilling bottles, they are designed for single use and repeated refilling can stress them to a possible failure point. You can be sure the newer the bottle the thinner and more cheaply they are made. I'm just guessing but a ten-year-old bottle is probably safer to refill. Many people refill them and get away with it but considering what could happen if they failed I'd probably make a mark on the bottle and limit myself to two, maybe three refills. Adapting the heater to use a larger refillable tank is the best way to go in my opinion.
I didnt think it was legal to refill one pound cans. Am not advising anyone either way. I just thought that was on the label.
@@SteveSherman-ij5gm 😊
Theres a better way to blead the small btl when filling ...using the pressure release valve .
Guess u bet Wrong, In Fact Most people HAVE been doing this stuff for YEARS. U don't have to Unscrew the 1lb tank while charging, U can use a small flat head or a pair of needle nose pliers to slightly pull open the relief valve while filling to let a small amount of gas out to make more room for liquid.
'promosm'
Just so you know, it's illegal to travel with a refilled 1 lb. tank.
Just curious, you mention using this if you have a power outage. You don't mention anything about carbon monoxide poisoning? Does this not produce carbon monoxide? Any fuel burning appliance creates carbon monoxide Which is lethal. Its pretty irresponsible to not mention this. Many people might not be aware of this fact. You can die from carbon monoxide poisoning. Beware
The company that makes them states on the box that it can be used indoors. There is a video on RUclips Tube showing Mr. Buddy heater being used inside a camper with a carbon monoxide sensor. It is safe. Do a little research before making inane statements.
@@Ratlins9 you can erase my comments all you like. Fuel burning appliances produce carbon monoxide, unless it has an.exhaust to the outdoors, it states to have it heavily ventilated. I dont see that info anywhere
This is safe to use indoors without producing CO; we live in the most litigious country on earth and they wouldn’t be selling this as safe to use indoors if it killed people. The main danger in an enclosed space is that it will consume available oxygen. That’s why it contains an integrated oxygen depletion sensor. I personally would use a carbon monoxide detector and test connections with soapy water before using indoors but I’m a belt and suspenders guy when it comes to safety.
A fuel burning device does not normally produce carbon monoxide. Only if incomplete combustion occurs caused by a burner fault can then cause carbon monoxide. Think about stoves in houses without vents and ventless gas fireplaces, both sold without venting requirements. Having a carbon monoxide detector is the smart move regardless of your gas appliances are vented or not. More likely is low oxygen if the space is very small and sealed very well. This device has an oxygen sensor with shutdown.
@@rj.parker yes it does, it is a byproduct of combustion. Where do you get your facts from? Even gas stoves in a house produce it, even if its small amounts, happen to me, fire department confirmed it. In Ontario Canada the government just passed a new law act requiring any building housing humans to have a co detector. Hawkins-Gignac Act, on my buddy heater website, they even state to have the place well ventilated. Why do you think that is? Guy on the video never mentioned co detector or leaving any windows open. But hey bud if you want to take that chance. Id rather be safe and atleast inform people of the fact. Not here for argument or to throw insults around. It was just a warning.