Finally, thank you for this tutorial bro, simple/basic settings are great for casual player, because I'm tired following recent Mini 4WD trends that became complicated lately
Sir, If i pierced my wheel what should i do to secure my wheel from the shaft? Is it already good to leave the end or the tip of the shaft before the wheel open or what? I'm worried about the wheels comin off from the shaft. Sorry i'm new to this hobby.
Hey Z3N Bluster, planning to build my first Mini 4WD, the Diospada Premium, you think I can apply what I learned from Part 1 and 2 of this video and apply it to myself? ...for my very first build? It was difficult to understand at first why we need all the other steps but I got it, also all the special tools you had kind of started to discourage me since it's more of a monetary commitment than I anticipated, though I'm very interested but obviously with entry level knowledge. Anyways, any other help and advice you could give me would be very much appreciated, thanks!
Everything should fit as long as it's AR. The only issue I foresee is that there may be clearance issue with the body front and sides. If that's the case you're allowed to trim the body to allow the parts to fit.
You can use 15451 in the front if you want that as your roller mounts. But for the super x piece I was trying to use. That was meant to be an underguard. Now I just use the 19mm HG Taper Rollers 95436
I love watching u build a car... How u done it is like a real pro... But could u give an advice how to pull out those wheels without making them bend??
The motor pinion have to be free spinning? Mini 4WD transmission is direct drive. Even when the motor isn't running, the pinion and motor are all connected to the gears.
Yes, we have some innovations that were made recently here in the States for Tuned Class. I will release those updates in the future when I have the time.
Look in my channel for the videos Tamiya Mini 4WD Testing: AR vs MA vs FM-A Technical and the video Tamiya Mini 4WD Testing: AR vs MA vs FM-A Speed Tech.
If you want to use Hyper Dash Pro. You'll need to change the front underguard to have brakes too. The limit of this design is a STRONG Light Dash if you can find one. It was designed for Tuned Motors so you'll have to make changes.
Isaiah Pertierra Compared to other hobbies it isn't expensive. For example, there's a card in magic the gathering called Misty Rainforest. A card used in competitive magic decks in alot of formats. An original Near Mint, Non-Foil copy is going to cost you $35. For your deck to be competitive you generally want around 3-4 these in your deck. That is either going to be $105-$140. A tournament legal deck requires 60 cards minimum. While you may have a nice set of 4 Misty Rainforest that you bought for around $140, you still need to build the rest of your deck. You will still need to buy 56 more cards to be able to compete. In comparison, this car costs around $160-$170.
i started this hoppy and im making everything step by step , you got this mate , you dont need to do everything at the same time every hobbys needs time to learn and practice so just start it slow and end it better! dont be hurry on everything you will get everything on the end , thats how the pro players are, you should start from ZERO!!
Finally, thank you for this tutorial bro,
simple/basic settings are great for casual player, because I'm tired following recent Mini 4WD trends that became complicated lately
Thanks, I learn alot from this video
Hi z3n! just a question, for the hollow stainless steel shaft can we use 60mm instead of 72mm? Is there any pros or cons?
Im waiting for part two..then many builds ahahah
Sa lahat ng filipino dyan😂😂kaway kaway naman dyan😂🤪🤟
I Waiting For part Two Stay cool Bro🖒
Do you need all the extra steps to put the basic car together? Like does everything come in the box to build the stock car?
Sir, If i pierced my wheel what should i do to secure my wheel from the shaft? Is it already good to leave the end or the tip of the shaft before the wheel open or what? I'm worried about the wheels comin off from the shaft. Sorry i'm new to this hobby.
Hey Z3N Bluster, planning to build my first Mini 4WD, the Diospada Premium, you think I can apply what I learned from Part 1 and 2 of this video and apply it to myself? ...for my very first build?
It was difficult to understand at first why we need all the other steps but I got it, also all the special tools you had kind of started to discourage me since it's more of a monetary commitment than I anticipated, though I'm very interested but obviously with entry level knowledge.
Anyways, any other help and advice you could give me would be very much appreciated, thanks!
Everything should fit as long as it's AR. The only issue I foresee is that there may be clearance issue with the body front and sides. If that's the case you're allowed to trim the body to allow the parts to fit.
@@Z3NBluster Can I use the FRP Wide Front Plate and Rear Plate since you mentioned the one for the Super X Chassis did not fit?
What part numbers?
@@Z3NBluster Front Plate (#15451) Rear Plate (#15452)
You can use 15451 in the front if you want that as your roller mounts. But for the super x piece I was trying to use. That was meant to be an underguard. Now I just use the 19mm HG Taper Rollers 95436
newbie question master zen why do we need to pierce the wheels? thnx
Give wheels more grip on the shaft minimizing slippage. Also makes it easier to use wheel pullers and pushers.
Pwede rin ba yung rear 3mm hg carbon stay (95259)? With the same multi roller stay sa front.
I love watching u build a car...
How u done it is like a real pro...
But could u give an advice how to pull out those wheels without making them bend??
Yes, you use a wheel puller. The wheels are pierced on this build.
Finaly.. Yeay.. 😍😍😍
Newbie question: what kind of lube did you use for gears?
Do you used medium wheel set
Thats Cool Bro thanks for info
Ali Dadulit You're welcome. Stay tuned for part 2.
I thought if it basic set up you could only use plastic parts like the rollers
newbie question sir, which do you prefer, medium dia or large dia tires for AR?
Medium mostly, but it depends on the track.
Will this do for super XX chassis too?
Maybe. It's up to you if you want to try it. You will need to use narrow medium dieter wheels on all four. But as far as I can see, you might be okay.
new to this type so Are Hard tires better than rubber ones when making mini 4wds?
I'm sorry what do you mean? Hard tires are also made of rubber. Are you asking Hard Tires vs Slick Tires?
sorry I mean slicks I’m really new to this
The only strange thing about these cars,the motor pinion is pressed on.The motor and pinion have to be free spinning
The motor pinion have to be free spinning? Mini 4WD transmission is direct drive. Even when the motor isn't running, the pinion and motor are all connected to the gears.
Do one for a super xx chassis
is there any chance you solve the under guard issue since 15242 not fit? I mean without cut the chassis.
Yes, we have some innovations that were made recently here in the States for Tuned Class. I will release those updates in the future when I have the time.
@@Z3NBluster Thank you.
Oh ok thanks
Ano takbo nan zen pro stack o technical??
Look in my channel for the videos Tamiya Mini 4WD Testing: AR vs MA vs FM-A Technical and the video Tamiya Mini 4WD Testing: AR vs MA vs FM-A Speed Tech.
I'm gonna be using one of my Asia Challenge AR's. Is that a bad idea?
The Thundershot Asia Challenge? That's up to you. You'll need to buy separate medium diameter wheels and tires though.
2.1 ba tlaga yung wheel piercer drill bit? Tningnan ko sa shopee 1.2 mm pinaka malaki..
Yeah, the 2.1mm bit comes with the Object 324 Wheel Piercer kit.
Did you change the gear from the box?
I said the gear ratio within the first three minutes of the video.
Thanks for the reply! Got it thank you so much
Can i use electronic contact cleaner instead of lighter fluid? Nauuso nnmn d2 sa pinas. ^_^
You can. It's up to you. Running it in a jar of lighter fluid is more thorough.
I only have manta ray cover.
Why u need to soak the bearing ball n roller to lighter fluid??
To remove the grease. the grease slows down the bearings.
Then do I need to put a small amount of oil on it before the race?
Bro can you make tutorial vid for xx chassis please thanks
No, X/XX has too many disadvantages.
Bro what item did you use for putting wheel on the shaft together?
Arrowmax Wheel Installer. Check DXNprovisions.com for availability.
You do shipping in PH?
@@pjm012 Go to the website, and ask them directly.
what body are you using poly aero avante?
Yes.
hi sir i have just moved to the us recently so where can i get the parts? are there any online stores? thx
Click the link in the video description. DXNProvisions.
Z3N Bluster thank you!
Is that a vtec solenoid cover?
No.
Is that a torque tuned motor?
No, it's a Torque Tuned 2 Motor.
Bro in this setup can use hyper dash pro?
If you want to use Hyper Dash Pro. You'll need to change the front underguard to have brakes too. The limit of this design is a STRONG Light Dash if you can find one. It was designed for Tuned Motors so you'll have to make changes.
Why do you soak them on Lighter fluids?
To clean out the grease. It slows down the bearing.
Light Fluids, as in pang sindi?
Zenbuster ? Do you have a avante pro x ?
Are you talking about Item number 18616? If so, then no. Also it's just called Avante X.
what gear ratio did you use?
I'm pretty sure I mentioned that in the video.
How much does all the parts use cost
Watch part 2.
@@Z3NBluster thanks master already seen it.
saan po tamiya race plsss kayalangan ko locations
Click the dxnprovisions.com link in the video description. I also showed those links in the first 1 minute of the video.
How expensive was this?
Watch part 2.
@@Z3NBluster thanks
How much po ang inabot ng build?.
Watch Part 2
kawaykaway ako
16:20 LMAO
This hobby is expensive :(
Isaiah Pertierra Compared to other hobbies it isn't expensive. For example, there's a card in magic the gathering called Misty Rainforest. A card used in competitive magic decks in alot of formats. An original Near Mint, Non-Foil copy is going to cost you $35. For your deck to be competitive you generally want around 3-4 these in your deck. That is either going to be $105-$140. A tournament legal deck requires 60 cards minimum. While you may have a nice set of 4 Misty Rainforest that you bought for around $140, you still need to build the rest of your deck. You will still need to buy 56 more cards to be able to compete. In comparison, this car costs around $160-$170.
Z3N Bluster I am frugal. Anw, maybe i feel this way because i bought individual parts rather than buying a box set which cost me more :(.
i started this hoppy and im making everything step by step , you got this mate , you dont need to do everything at the same time every hobbys needs time to learn and practice so just start it slow and end it better! dont be hurry on everything you will get everything on the end , thats how the pro players are, you should start from ZERO!!
pinoy amputa. hahaa Idol
Ako ang puta?