Hello Sir, My City 4th Gen V MT 2021 has done almost 20k kms so far with no issues as such. She's doing great. The only upgrade I want is the Tyre upsize. I am using the stock 175/65/R15s tyre size from Goodyear. Could you please recommend perfect upsize and quiter tyres.
Sorry for being late to respond, if you are using stock tyres and do not want to change alloys the best options are as below Option#1: 185 x 65 R16 > Overall diameter: +13mm, Sidewall height: +6 mm, Ground Clearance: +7 mm, Speedo Error: +1.3 KM's/Hr Option#2: 195 x 60 R15 : > Overall diameter: +6mm, Sidewall height: +3 mm, Ground Clearance: +3 mm, Speedo Error: +0.6 KM's/Hr Option#1: Will offer more Ground Clearance and less impact on Fuel Economy. Option#2: Will offer better grip, Less Speedo Error, Better Breaking but will cost more hit on fuel economy and may be a bit of loss in acceleration. Choice you can make is always yours!! Good Luck.
I’m also having Honda city 4th generation. It came with halogen lights (HB3 - High & H11- Low). Recently, I’ve upgraded to Led lights. But the high beam throw is very less. How to adjust high beam separately ? When I turn that knob (shown in the video), it only adjusts low beam. I cannot find another knob for high beam. Please help !!
Well, people often do mistake by switching to LED Bulbs in Halogen setup, however the throw will not be same as it was before because of the reflectors are designed considering the bulb spec, so the lumens gets wasted by not concentrating the light on road. There is no separate adjuster as per my knowledge. I would have upgraded to better Halogen bulbs like OSRAM Night Breaker or Philips Xtreme Vision instead of aftermarket Halogen Bulbs.
It is LED Chip in-built, not bulbs. Aftermarket LED Bulbs does very less to the driver rather blinds the oncoming traffic because the reflectors are not designed for the LED Bulbs
If the Leveler inside the cabin is not working then most probable reason is the drive motor went kaput there, but if that is the case only one side of the headlight should be denying to be adjusted. If both the headlight (Left & Right) is not responding to leveler adjustment then there is a electrical issue with either the Switch, Wearing or the fuse". Please have those checked.
This video was taken using the Fog light used in 4th Gen, I was being told by Honda Service that the fog lights are same in 5th Gen too, not sure if anything changed.
The 2013 Honda City has two knobs for adjustment. I was able to adjust vertically through one of them. What is the purpose of the other knob?
Hello Sir,
My City 4th Gen V MT 2021 has done almost 20k kms so far with no issues as such. She's doing great. The only upgrade I want is the Tyre upsize. I am using the stock 175/65/R15s tyre size from Goodyear. Could you please recommend perfect upsize and quiter tyres.
Sorry for being late to respond, if you are using stock tyres and do not want to change alloys the best options are as below
Option#1: 185 x 65 R16 > Overall diameter: +13mm, Sidewall height: +6 mm, Ground Clearance: +7 mm, Speedo Error: +1.3 KM's/Hr
Option#2: 195 x 60 R15 : > Overall diameter: +6mm, Sidewall height: +3 mm, Ground Clearance: +3 mm, Speedo Error: +0.6 KM's/Hr
Option#1: Will offer more Ground Clearance and less impact on Fuel Economy.
Option#2: Will offer better grip, Less Speedo Error, Better Breaking but will cost more hit on fuel economy and may be a bit of loss in acceleration.
Choice you can make is always yours!! Good Luck.
In terms of Quieter tyres my choices are
a. Michelin
b. Continental UC-6
c. Yokohama Blue Earth
@@DebsAutoLogy thank you so much sir
I’m also having Honda city 4th generation. It came with halogen lights (HB3 - High & H11- Low). Recently, I’ve upgraded to Led lights. But the high beam throw is very less. How to adjust high beam separately ? When I turn that knob (shown in the video), it only adjusts low beam. I cannot find another knob for high beam. Please help !!
Well, people often do mistake by switching to LED Bulbs in Halogen setup, however the throw will not be same as it was before because of the reflectors are designed considering the bulb spec, so the lumens gets wasted by not concentrating the light on road. There is no separate adjuster as per my knowledge. I would have upgraded to better Halogen bulbs like OSRAM Night Breaker or Philips Xtreme Vision instead of aftermarket Halogen Bulbs.
Does it have led strips or bulbs? Is it possible to change the led strips for a more bright light?
It is LED Chip in-built, not bulbs. Aftermarket LED Bulbs does very less to the driver rather blinds the oncoming traffic because the reflectors are not designed for the LED Bulbs
My 1 led light not working can you suggest which one should I buy and what watt led light are installed in it..
Not sure which LED light you are referring to, can you please elaborate?
want to set High Beam only.. is it possible ?
Of course. Attach the high beam to the low beam itself. However it is not recommended considering the oncoming traffic will be disturbed.
My headlight leveller up down is not working please upload completely video including fuse loctaion i have honda city zx 2018 dtech
If the Leveler inside the cabin is not working then most probable reason is the drive motor went kaput there, but if that is the case only one side of the headlight should be denying to be adjusted. If both the headlight (Left & Right) is not responding to leveler adjustment then there is a electrical issue with either the Switch, Wearing or the fuse".
Please have those checked.
why do u make only honda city videos
Simple, I have one and I feel sharing what I learned over time may help others..
I have honda city zx 2020 with all LEDSs set up, not finding any screw as shown in video 😢
This video was taken using the Fog light used in 4th Gen, I was being told by Honda Service that the fog lights are same in 5th Gen too, not sure if anything changed.
it is h11 or h4
Neither, These are factory fitted LED chip, not a LED Bulb