This work on Bedrock Edition? I have been through 4 different guides that dont say different and i messed up my base building them only to have to rebuild it and try again 😰
@@Goose_with_internet Oh no I meant i have tried other ones and they have failed, i wanted to question this one before i built it 😆 Thanks for the answer though bro
One of the pistons isn't going off, the redstone connection is out of power, but when i try to put a repeater/comparator there that piston doesn't get pulled back.
Great video! Super easy to follow. But one minor thing, if you click a repeater twice its actually at 3 ticks. because a standard repeater always has 1 tick of delay, so two clicks makes 3 ticks. Only confusing if you know it
While I was building I tried to test the door, when I turned it on it worked perfectly, but when I closed it, the bottoms sticky pistons acted like normal pistons.
This does not work in c aves and cliffs part 1 as far as I know, the redstone that’s supposed to go into the repeaters and to the left/right to be hooked up to the rest of the redstone connects with the piston next to it, which just fucks up to whole build.
I'm doing this in a public server, so your video was really helpful I have a 2x2 hole from y 76 to y -44 with carpets over powdered snow at the bottom There's also a bubblevater going up two blocks from the down hole The server has a land claim mod installed, so nobody can break the door open or touch the button for the door, which also prevents them from falling in my base
The red dust doesn't seem to link to your first horizontal sticky piston and it works great. When i try to copy, it doesn't work and the ONLY thing different is that red dust link
When I set it up. I noticed that on my end while the on position works (the bottom pistons are pushed) when turning it off those bottom pistons while being pulled down are somehow left in the dead center. What’s causing that.
so i was building this and I realized that the door stays open once you go into the base is there a way to make like a timer that closes the door after you go into it?
@@vonnbvlogs144 to make a button, make a redstone wire going through a block with a redstone torch on it. that redstone torch activates the piston door which means the door is going to be closed. when you press the button it deactivates the redstone torch. you can also add a few repeaters
@@sweetcisteen lol thanks but i figured it out lol 4 months ago i was extremely terrible at redstone now i made a button with a delay and a second button from the underground part
Great video. Thanks for NOT glossing over the steps. Often times I watch a tutorial and go away scratching my head. However, I'm going to save this to my favorites and use it repeatedly.
one solution is that if you use a button instead of a lever, and use redstone comparators to extend the button's signal it will give enough time to go through then it will automatically close when it is done
i didn't tried building it yet but for those who don't get it working in bedrock try to connect the 4 repeaters and the redstone so that they face to the sticky pistons than it should work. in bedrock a repeater works only in the direction it is facing.
The Pistons are moving though, how do I not make them move because then they swap and some of the blocks that are supposed to raise aren’t raising only moving forward
I did exactly as you did. but after more than almost a handful of attempts, I now give up. I simply do not understand why it does not want to. especially when I do the same as you 😳
Tyson for showing me this I remeber the time when I didnt even know how to make a red stone door then I knew now ik this tysm for learning me I really appreciate it
Not working for me I covered it up then I pressed the lever the Pistons that were supposed to bring the stuff the dirt up just stayed there the other Pistons didn't bring it to the side I wasn't able to drop down
Thanks a lot man:) U explained it so nicely, it didn't confuse me the least... I just surf into ur vids whenever I end up stuck doing any minecraft job... EXCELLENT JOB FARZY!! MY BEST WISHES FOR U!!😉🤟🤟
I forgot to put one piece of red stone down at a part and was stressed out thinking what’s wrong for like 10 mins but after I figured that out the door worked great 👍
THIS IS THE best tutorial I’ve EVER BEEN WATCHING! You are really helpful, and it’s really easy to follow along. Your sub count should be much higher. Thankyou for further encouraging my newfound love for red stone.
I did exactly what you said, and for the most part it works but when i retract it, the sticky pistons facing up don't get taken back with the others, what am i doing wrong?
Great video! Just note that if you're doing this in bedrock it might not work because pistons are dumb and the bottom ones won't pull back the pistons that push the grass up, and the grass will get stuck on the top pistons instead :)
I'm having trouble getting the bottom horizontal sticky pistons to retract the vertical sticky piston that retracts the floor. The sticky pistons that bring the material block over horizontally function but the sticky pistons that brings it down stay in the same place blocking the entrance. Could be a thing I'm messing up or it could be patched but I'm not sure how to make it work
I figured out a fix for those of you having trouble. STICKY PISTONS DONT PULL PISTONS THAT ARE EXTENDED.The short answer is to put a delay on sideways facing pistons so that the upward facing piston has time to retract the block before being pulled away by the bottom sideways facing piston. So just make a line for the sideways piston but put a max delay on it. Then make a line for the upward one but with no delay. Lmk if you need more detail
Hey farzy it got to complicated so i took 2 pistobs away and it was those facing up ones and then i made a pool on top of it and then i tested it an it works
Ik this is 2 yrs ago but do you know how to make the thing where you put a redstone torch somewhere then a piston breaks it then opens the door? Im trying to build it in my circular hut so im thinking of doing that kind of redstone instead of a button or lever😊
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Materials
12 sticky pistons 8 repeaters 32 redstone
your welcome
Thank you, and its you're
and one redstone torch for the inverter.
@@Enderia2 ye
@@Enderia2 if you don’t mine me asking, how do you invert this contraption?
thank you dude
Bruh my sticky piston won’t grab the other. It pushes it out and won’t grab it to put it to its original placement
Lmao same
@@waylonquiggle2492 same
did you find a way to fix it? im having the same issue
Mine is doing the same
are we all bedrock players?
Me building this in my single player survival world😂
Same I gave up
You should have said. Me building this in my single player world knowing that no ones gonna join it 😃
This work on Bedrock Edition?
I have been through 4 different guides that dont say different and i messed up my base building them only to have to rebuild it and try again 😰
@@46whiteout yes it does work on bedrock maybe you messed something up and didn't realize it
@@Goose_with_internet Oh no I meant i have tried other ones and they have failed, i wanted to question this one before i built it 😆 Thanks for the answer though bro
One of the pistons isn't going off, the redstone connection is out of power, but when i try to put a repeater/comparator there that piston doesn't get pulled back.
That happend to me too
Yup, me too
same here
Same here
same here, does anyone know what to do?
when you explaned it was so nicely now i can steal things from my sisters tysm your the power jesus btw im a new subber and love your vids
thanks :)
Great video! Super easy to follow. But one minor thing, if you click a repeater twice its actually at 3 ticks. because a standard repeater always has 1 tick of delay, so two clicks makes 3 ticks. Only confusing if you know it
While I was building I tried to test the door, when I turned it on it worked perfectly, but when I closed it, the bottoms sticky pistons acted like normal pistons.
same
set the 2 facing to you the tick set it to 4 tics
Same
same
@@bluingcar1211 wait which ones
This is so simple and easy and very functional. Probably best redstone door tutorial there is
This does not work in c aves and cliffs part 1 as far as I know, the redstone that’s supposed to go into the repeaters and to the left/right to be hooked up to the rest of the redstone connects with the piston next to it, which just fucks up to whole build.
Same not working for me
Same it not working
it worked for me in caves and cliffs part 1
are you on java? idk if redstone is still different between the 2 versions
I did this in caves and cliffs and it works fine
this is literally goated, you rock man
thanks dude
I'm doing this in a public server, so your video was really helpful
I have a 2x2 hole from y 76 to y -44 with carpets over powdered snow at the bottom
There's also a bubblevater going up two blocks from the down hole
The server has a land claim mod installed, so nobody can break the door open or touch the button for the door, which also prevents them from falling in my base
Thank you
anti grief plugins are boring as fuck
@@bbwong1027 ?
Nobody cares 😭😭
@@luhbeantalk 55 people did, more than nobody
This is so fun XD new to redstone but this worked perfectly. Thank you!
simple, easy to follow, great vid!
The red dust doesn't seem to link to your first horizontal sticky piston and it works great. When i try to copy, it doesn't work and the ONLY thing different is that red dust link
Same. It links to the first row of pistons where in his video it doesnt turn to connect to those ones. Doesnt work anymore
Good to know that I'm not the only one who had the issue.@@traviscomley8712
Right
When I set it up. I noticed that on my end while the on position works (the bottom pistons are pushed) when turning it off those bottom pistons while being pulled down are somehow left in the dead center. What’s causing that.
The same thing happened to me
Same
same here
I figured it out. Just remove the temporary blocks on the side of the center (not the pistons, the 2 other sides)
@@Sam_Wich for me it worked when I did that but the pistons didn’t raise
Thank you for helping
so i was building this and I realized that the door stays open once you go into the base is there a way to make like a timer that closes the door after you go into it?
does buttons work for it? idk maybe it works cuz in strongholds it closes the iron door after a few seconds
Then just add a lever on the inside
Use a pulse extender and a wood button
@@vonnbvlogs144 to make a button, make a redstone wire going through a block with a redstone torch on it. that redstone torch activates the piston door which means the door is going to be closed. when you press the button it deactivates the redstone torch. you can also add a few repeaters
@@sweetcisteen lol thanks but i figured it out lol 4 months ago i was extremely terrible at redstone now i made a button with a delay and a second button from the underground part
Great vid but I would build a redstone invertor so it could lock without the lever
Im having a priblem where the sticky piston facing upwards doesn't move back over to the side, they just get stuck in the middle. How can I fix that?
i like it when he is nice and taking things slow this deserves a like and sub
Great video. Thanks for NOT glossing over the steps. Often times I watch a tutorial and go away scratching my head. However, I'm going to save this to my favorites and use it repeatedly.
JUST what i needed, here you go, a sub for you my man!
You've been the best at explaining redstone creations! You're the best
You are favorite redstone tutorial maker now
2:30 I’m so confused! When I’m placing the red stone it attaches to the first piston, what should I do?
same:( but i think it works
You have to configure it a bit in bedrock or else it won’t work
same I did it in 1.17 and it didn't work
This happened to me too, it didn't work.
it no work
So how would I add a second switch out of the secret exit?
The grass blocks don’t travel with the pistons for some reason and sometime the pistons do not stick to the others
Same
Same
Same
@Blqze_PvpYT correct. Unfortunately. I loved the design though
@Blqze_PvpYT oh no shit?
Thanks for the tutorial man
@Farzy is there a way I can make it close from the inside. One lever on the outside and one on the inside so I can close it while I’m in the base
one solution is that if you use a button instead of a lever, and use redstone comparators to extend the button's signal it will give enough time to go through then it will automatically close when it is done
Oh my goodness thank you so much it was taking me forever to look a
For a video like this thank you ☺️
i didn't tried building it yet but for those who don't get it working in bedrock try to connect the 4 repeaters and the redstone so that they face to the sticky pistons than it should work. in bedrock a repeater works only in the direction it is facing.
I love how simply you explain the build process, it makes it very easy to build while listening to ur vid man 🔥 💯
ur voice is so calming
this is very confusing how do you actually close it from the INSIDE
Try to use a button instead of lever
@@melocreations1 a button would close it temporarily then open back up
Thx man this works really well in 1.21!
Hey farzy I think you should make a piglin trading hall in your survival world,and thanks for this!
I will try that soon! I really like the idea :)
amazing vertical approach! love it!
The Pistons are moving though, how do I not make them move because then they swap and some of the blocks that are supposed to raise aren’t raising only moving forward
Did u fix it
yo farzy you are so nice and kind an easy to follow
The bottom pistons just stay and get pushed but dont get pulled back
Yeah that what’s happening to me
@@Goaliekidyt356 same
I know thats why i made it one in the ground
I did exactly as you did. but after more than almost a handful of attempts, I now give up. I simply do not understand why it does not want to. especially when I do the same as you 😳
Same
Same here
Are you on bedrock?
@@Syed_1-5-12 nope, i am atleast 3-4 Blocks away from bedrock 😄
@@andreehyldebrandthemmingse4131I meant do you play bedrock edition cause bedrock has bad Redstone mechanics
This helps so much I subbed
THANK YOU SO MUCHHHHHH You were so nice during the tutorial too thanks im using this for a trap in my castle!
Glad I could help!
@@FarzyMC bro not working
@@911_LuCiFer it works your not doing it right
@@simth54 well the how do you do it right
Tyson for showing me this I remeber the time when I didnt even know how to make a red stone door then I knew now ik this tysm for learning me I really appreciate it
Not working for me I covered it up then I pressed the lever the Pistons that were supposed to bring the stuff the dirt up just stayed there the other Pistons didn't bring it to the side I wasn't able to drop down
Thank you man it really helped
Mine isn't working properly the pistons go up before the grass could get pushed on
Bro you are god i am searching thich machine like Anshu bhist and you told me thank you 😂😂❤❤❤❤❤❤❤😊
how to close the entence from inside
how do you?
Great video man nice pacing on the steps not to fast not to slow thank you for the tutorial man 👍
Thanks a lot man:) U explained it so nicely, it didn't confuse me the least... I just surf into ur vids whenever I end up stuck doing any minecraft job... EXCELLENT JOB FARZY!! MY BEST WISHES FOR U!!😉🤟🤟
You're very welcome! :)
thanks, this really helped for my project i'm doing :)
I tried to do this with a pressure plate but it stays open when the plate is unactive and closes when activated
Thanks for this idea 😊😊😊😊
Me looking at this video getting stressed out... I look at Mumbo jumbo’s piston door. 😳🤯🤯
Thank you so much for the simple design it on take like 2 mins 🙏
I forgot to put one piece of red stone down at a part and was stressed out thinking what’s wrong for like 10 mins but after I figured that out the door worked great 👍
OMG you are so kind and nice. SOOO easy to follow too I will deffinitly be watching your channel again
how do you close it from the inside
thank you for making this tutorial!
Your tutorial is easy to follow man! Can I request one thing? Can you make 4x2 hidden staircase that will work in survival?
I will try one day :)
@@FarzyMC Thanks! Looking forward to it ^_^
Does this work on minecraft pocket edition. Please reply
@@shradhads5124 it probably does m8
@@FarzyMC hey dude my bottom pistons act like normal pustons
Thank you for your tutorial ❤
when I made it, no matter where I put the lever, only two would work
Just add more repeaters
@@Baileyjmc I'll try that
is there a way to make this with pressure plates to open it instead of a lever?
This did not work for me, it is flush but the pistons stay in the spot where the base is supposed to be
This happens for me aswell, any one know how to resolve this ?
No, he hasn’t replied 😩
Same here
Ty this helped me sooo much
THIS IS THE best tutorial I’ve EVER BEEN WATCHING! You are really helpful, and it’s really easy to follow along. Your sub count should be much higher. Thankyou for further encouraging my newfound love for red stone.
Thank you for this tutorials it realy help me !
Now i can make a secret base under my cousin's house and steal all his diamonds!!! >:)
OH NO HE USED THE INVISIBLE CHEST TUTORIAL FROM FARZY'S CHANNEL
dang it im getting too popular XD
Bobo
Farzy: makes it a base
Me: makes it a deadly void village defence trap
It is not working
Maybe wrong version if Minecraft maybe it's bedrock
Bedrock
I did exactly what you said, and for the most part it works but when i retract it, the sticky pistons facing up don't get taken back with the others, what am i doing wrong?
It didn’t work
We both on bedrock then because mine messed up
best part was him giving us emotional support
Just wanted to say thanks for your help. I still don't quite understand how everything works, but at least I'm one step closer.
Great video! Just note that if you're doing this in bedrock it might not work because pistons are dumb and the bottom ones won't pull back the pistons that push the grass up, and the grass will get stuck on the top pistons instead :)
Anyway to do this then?
How do I make one then? Is it just impossible in bedrock?
i love the door but one question. if ur gonna make a secrete base under the door how do you close the door from inside?
Thank you. but is there a way to close it from the inside?
I’m having an issue where the bottom outward facing pistons aren’t picking up the upward facing ones after the first lever pull. Any ideas?
I've got the same issue
Same
It works pretty well but I recommend doing it 2 blocks down and just covering the top with the surrounding block for example grass.
The Redstone connecting the inner repeaters also connects to the piston next to it
I know and it’s ruining the whole project
are you on bedrock?
@@neezduts6933 nope
@@yo_boy_tribe9306 well I don't have a problem
I'm having trouble getting the bottom horizontal sticky pistons to retract the vertical sticky piston that retracts the floor. The sticky pistons that bring the material block over horizontally function but the sticky pistons that brings it down stay in the same place blocking the entrance. Could be a thing I'm messing up or it could be patched but I'm not sure how to make it work
Thank you, enemies really like to snoop around while we are away
Thanks so much for the easy base
I figured out a fix for those of you having trouble. STICKY PISTONS DONT PULL PISTONS THAT ARE EXTENDED.The short answer is to put a delay on sideways facing pistons so that the upward facing piston has time to retract the block before being pulled away by the bottom sideways facing piston. So just make a line for the sideways piston but put a max delay on it. Then make a line for the upward one but with no delay. Lmk if you need more detail
ay broski can u explain better
im trying to understand, not your fault im just tired at the moment
IAm Cooki3 what dont you understand exactly?
@@aydencarpenter7612 the pistons already have a repeater in them. Do you want me to add another one to them? I’m having the extended piston problem.
Thank you bro the most easy secret base in the minecaft
Your video is amazing
Hey farzy it got to complicated so i took 2 pistobs away and it was those facing up ones and then i made a pool on top of it and then i tested it an it works
Thank you it help me alot
I just want like a short tutorial on how to close it from inside my base please respond😊
same
this helped so much thank you!
A part of me wants to know how to make this with the change that it's closed until you press a button/lever
thx bro this really help in an smp
Great Video Really helpful thanks
put some glazed terracotta as you like can be any colour under the 2 pistons facing the sky and break the terracottas
2:01 me a mechanical engineer: "THEN CANT I MAKE IT FREAKING WORK FARZY"
im just putting a bunch of your vids in a playlist to learn about redstone stuff
I fixed it and I liked and subscribed
Ik this is 2 yrs ago but do you know how to make the thing where you put a redstone torch somewhere then a piston breaks it then opens the door? Im trying to build it in my circular hut so im thinking of doing that kind of redstone instead of a button or lever😊
you can put a redstone torch and some redstone to it and a button for the door open for a time and close then