TRUSS RODS - Everything About Them! Install, Operation & More!
HTML-код
- Опубликовано: 4 сен 2019
- A guitar repair kit for under 20 bucks! amzn.to/31HNIRC. (contains affiliate links). In this video, Phillip McKnight and I are at the Framus / Warwick factory in Germany. We get a lesson on how truss rods work, and how they are installed. Really cool stuff. I hope you enjoy the video!
►Thank you for watching my video! goo.gl/c59QoB.
►For amazing service & great deals: bit.ly/2Zs3w94
► If you are in Europe, check out Thomann: bit.ly/2kqQ8DA
By the way, for those wondering, I am not at #42gsone This was filmed right after TGU19. This was filmed at #framus in #germany
Support this Channel with a selection of TTK Merch:
►STORE: teespring.com/...
★ HOODIE - teespring.com/...
★ STAFF - teespring.com/...
★ BAD BOYS - teespring.com/...
★ BAD BOYS BLACKOUT - teespring.com/...
I'm also on Patreon! Private Live Hangs and More!
★ / thetoneking
My Favorite Places to Get Gear:
For new product & the best service in the USA, check Sweetwater:
★ bit.ly/2Zs3w94
My Fav Brick & Morter Store is Chuck Levin's / Washington Music Center. Give them a call and let them know I sent you!
★ 1- 301-946-8808
For used product, Reverb is the new eBay!
★ reverb.com/sho...
★ reverb.com/mar...
(contains affiliate links)
For new product in the EU, UK - check in with Thomann:
★ www.thomann.de...
(contains affiliate links)
More Links:
★ RUclips / lmsjr
★ WEBSITE thetoneking.com...
★ FACEBOOK / thetoneking
★ INSTAGRAM / thetoneking
★ SUBSCRIBE goo.gl/c59QoB
Check out my Singles:
LIES: (first single)
★ On RUclips • LIES by The Tone King ...
★ On iTunes itunes.apple.c...
THE MAN: (second single)
★ On RUclips • Video
★ On iTunes itunes.apple.c...
MADE IN NEW YORK: (latest single)
★ On RUclips • MADE IN NEW YORK by Th...
★ On iTunes / made-in-new-york-single
Save 7% off your first year membership of DistrKid. VIP link:
★ distrokid.com/v... Please note, description above may contains affiliate links to companies like Amazon.com, Sweetwater.com, ThomannMusic.com, Reverb.com, etc. If you click on one of them and make a purchase, I'll receive a small commission with no added cost to you. Thank you for your trust & support! 
Развлечения
If you like this video, here is the full video series. Check back as I keep adding more. ruclips.net/video/7xr1F2qad3o/видео.html
Is there a video to watch that explains how you and Phil met up and start doing the Collaborative thing together? I am thinking as my channel grows...I might want to do something like this.
That place doesn't look like a typical high production manufacturing environment which is nice to see . Thanks for content .
Extremely rare to see this in a video. A masterpiece
Another really interesting video TTK! Thank you for sharing!
That was really interesting and was explained very well indeed thank you TK for a great vid
Really enjoyed this one.🤘🤘
Thanks Paul!
Cool guitar factory.
Cool! I like to see production videos like this. I’m a huge fan of “How it’s Made” too so go figure!! 😊👍🏻
Thanks blkjakk! I like 'how it's made' videos too. I could do this all day long! haha!
The Tone King Yeah, me too. 🤘🏻♥️
Absolutely, how it's made type stuff is great. I would have liked to see the tooling used to cut the different woods, and if they need different cutter materials, or cutters with different grind geometry, or different coatings, for different types of wood, like we do for different metals.
Even better, the tech data (sfm or rpm of cutter, feedrate, especially feed per tooth, and the depth of cut).
The fixturing, or method of workholding, if they screw it down and cut of the tabs or ears later, if it's clamped down, or clamped from the sides, or if they use vacuum fixtures.
I'd love to know how they locate the parts, relative to the tooling and locating the neck blanks in the fixturing, all of that is interesting to me.
Btw, Phil, (deg C x 1.8) + 32 = deg F, so:
50 × 1.8 = 90
90 + 32 = 122 degrees F
I do like that they pretension the truss rod on a straight neck, for several reasons.
Enjoyed the video, thanks guys!
Metalbass10000 I am with you on this. I get into the minutia with things & this is right up my alley. 😁👍🏻
Ahhh now I know! Thanks!
Cool video! I can't wait to see the whole process and your guitars at the end.
6:16 thank you for asking that question Tone King! I've always wondered why Warwick/Framus does that whereas other manufacturers tape off the channel when they glue on the fingerboard.
This is a one way truss rod, totally different when you install a two way
@@aevoguitars2576 Then why did he say it was a dual action truss rod?
@@DemonEvidence maybe it is two way.I never seen one like that
Is it possibble to change truss rod from a esp ltd f10 by taking off the fret board ?
Really good video series! Thanks!
Thanks for sharing TK ! :-)
You're very welcome buddy. Hope you are enjoying the video series from my visit to Framus!
@@thetonekingofficial Yes I am ! :-)
Very nice Louis & Phill! \m/ Gut to zee CHERMAN kraftwerkmenchschiff! ;o)
Great series - learning lots of useful info!! 👍🤘
EXCELLENT VIDEO. THANKS
Nice. Are they for guitars you and Phil are having made? or just a demo of the process?
Wow so great video~~!!
Very helpful!!
Thanks for sharing^^
Good explanation! I saw a few examples of truss rod installing without this piece of wood (above the rod) which fills empty space below fingerboard. Is this OK or not? If I well remember bottom of the slot for rod was flat (not in arch shape as in this video).
Where to buy truss rod like that?
Good one.
Liking that dark wood neck
It ironic to learn the truss rod in Warwick Factory, I have a lot Warwick bass, and had replaced one of the truss rod, the truss rod they use is weak, easy to brake and hard to fix.....other kind truss rod is way better.
One of my walnut trees died. 🤔
So much automation even with high end instruments these days. Great video though on the truss rod assembly. I was always a bit unclear of all the actual process.
What DO you want then?
Don't think of it as automation, because even before that machine can be programmed, they have to design the fixturing, make all of the components of the fixturing, then assemble and test it, then prove out their process (on each indibidual neck blank location and it looked like more than 20 workpiece locations), these machines are loaded and unloaded by hand, and you see all the hand work that he had to do just those two neck blanks. And all of the blanks as they go through the process of becoming finished next to have to be measured at every step at so many dimensions, and each will almost always require some amount of handwork to get them to the right dimensions and to get them to the right feel, which is even more important than the actual dimensions.
The use of a CNC mill in operations like that isn't so much about automation, what it's really about is accuracy and precision, as well as a dramatic reduction in the scrap rate, and a dramatic reduction in the lost time due to a worker getting injured during that process, it's actually a much safer way to do things using a machine like that.
Hope that helps and hope I didn't come off as, "THAT Guy."
Stuff like this is my profession and one of my hobbies and I just really enjoy this kind of stuff.
@@Metalbass10000 I have nothing against it or disagree with anything you said. I'm a novice bass guitar luthier and have been contemplating investing into a small cnc machine. My current 3 design's I have drawn up aren't a standard precision or jazz styled bass but my leaning toward a heavy metalesque styled custom designs. My main concern is with the neck construction and getting the whole thing shaped proper. Right now every part of the bass builds I do are with bare bones of wood working tools and lots of manual sanding and filing and measuring.
@@Metalbass10000 You're 100% correct!
Those machines look expensive 💰
Good video. But please stop with the loud annoying music.