No way these are great mods that'll make this thing near bulletproof. 7075 is a damn strong aluminum. Shelf queens are all 6061 (and most people throw aluminum suspension arms that'll bend on the shelf queens). It certainly does look clean in the vid, but I'm sure Chris is going to send it when he gets a chance
what a beauty ! I buy the ultimate xrt the blue version ! I don't get this beauty yet but maybe in a couples week's ! I just can't wait to put my hand on ! nice video my friend , and a beautiful upgrades ! 👍
Amazing build. If you don’t min me asking (not sure if anyone else has asked this)…what was the actual cost of the aftermarket parts? Would love to do something like this in orange.
Bad ass rig. What fan is on the motor and how did you connect it ? I looked on your website but didn’t see it. I have the Max5 & 5690. Not done yet. Were you not able to plug fan into port on ESC where the OTA would go or do you use a splitter and connect it along with the ESC fan ? Thanks.
Hey man, im doing an XRT build inspired on your build here. I want to try your belt drive and motor mount as well. Can you tell me what gearing you suggest? What was the gearing you put in this video vs what have you had the most success with (Fast and bash)? Also, what motor mount size for the 1100kv HW G2? 25mm or 30mm? Just having a little trouble confirming numbers before I order. Thx my man!
Thank you!! You will need the 30mm screw spacing motor mount and i am using 20/30 belt drive both 8mm bore. I also now have an 8mm HD spur shaft i offer on my site
Very nice and professional job, it became beautiful and tough. Kindly is the esc a Max5 g2 Combo with the 5690 1250kv g2 motor because I am interested in purchasing one for my Limitless to do some drag racing with it and I do not know how it performs on a 1/7 scale that weights around 7kg inclusive of two batteries!
I'm building the same but an Xmaxx right now as we speak 12s though. It's costing me more than I want to say but it will be for sale also to a serious buyer.
I consider myself as a serious buyer :-)@@pnwRCMADNESS - lets see what it ends up at - and shoot me a PM, we will figure it out. However it might be a better deal to buy all the upgrades and do the assembly myself on a new XMAXX that I buy in Europe - due to import VAT and Duties.
Wow. This is an insane build!!! Love it!! I have an xrt ultimate. I don’t really bash. I like driving it fast and doing small jumps. What motor upgrades do you recommend? I’m stock. I just want to go faster.
I know what I have in some of my 1/10 scale, I don't even want to know how much all that cost. Nice video and work, keep spending that big money so I don't have to.
Looks awesome ! Is that the 6mm or 8mm PET sleeve on your motor wires or another size altogether ? Gonna try to finish up my XRT over Christmas break. Thanks.
Yes sir! All the new stuff coming out is all 7075 aluminum. They have all new engineers and have completely redesigned all the new stuff. They are all super nice. I'd never recommend a bad product. I thank you for tuning in as well🤙🏼🤙🏼
When i put the gpm diff gear in and put together, it blocked turning by the bevel gear...,so it was the Opposite case that you have when you need shims, u know...maybe i had get it done with some side shimms at the place were the bearings of the diff sits but i did it together then with the Stock diff gears. Dont know why, i had the vitavon Cover, the vitavon upper bulkhead and also the gpm bellcrank and the thing what Comes on tp at the bellcrank, gpm too. Maybe i dont have to Mix vitavon and gpm lol, that was unpro😂
How much did all this ACTUALLY cost? LOL Also, I didn't really get a good look at the front. When adding the belt drive, did this truck become rear wheel drive only? It looked to me like the center mounted motor would keep if from being 4WD. If it is 2WD are there any improvements made to the speed and handling? I personally tend to prefer 4WD handling, but others might disagree.
Everything is sweet except those battery trays bolt heads sticking out the bottom like that will catch on everything when bash hard and do more damage the good better off to jb weld or epoxy the trays in
Thank you! Never had an issue though with them and I've sold a couple hundred sets and been using them myself now about 5 years. They do get dinged up though like the suspension part nuts do. But all in all not a complaint. If that were the case I just wouldn't sell them. I appreciate the feedback for sure 👍
Those upgrades are insane!!! WOW
33 lbs is not near as bad as I thought it would be with all those upgrades! That thing looks so sick!!
Turning on performance premium RC vehicle into a shelf Queen
Thank you for tuning in! Hopefully this weekend I'll upload the quick bash video. It was a power house
No way these are great mods that'll make this thing near bulletproof. 7075 is a damn strong aluminum. Shelf queens are all 6061 (and most people throw aluminum suspension arms that'll bend on the shelf queens). It certainly does look clean in the vid, but I'm sure Chris is going to send it when he gets a chance
You are such a hater. I feel bad for you. It’s a horrible disease. No cure.
Hell... why not. This this🔥
Does the belt drive work with any HR motor mount?
wow I was impressed. I hope I can put mine like this. I love the TRX 8s...
Thank you!!🙏🏼
I love the battery straps those things came in clutch on my xmaxx build🙌🏼🙏🏼 1:35
OMG!!!!!!!!!!!!!!!I HATE 3M DOUBLE SIDED TAPE!!!! That little tip you just mentioned is amazingly simple and works awsome!!! Thank you!
You're welcome!! Thank you for tuning in!!
Just getting into the hobby - wow, this is so cool. I'm inspired to eventually do something like this :)
thank you for tuning in!!!!
Lots of changes. 😎 What do you have wrapped around the shocks?
insane build nice
what a beauty ! I buy the ultimate xrt the blue version ! I don't get this beauty yet but maybe in a couples week's ! I just can't wait to put my hand on ! nice video my friend , and a beautiful upgrades ! 👍
new subscriber from Puyallup, a few rustlers, stampeded, and sledge to bash around the valley!!
Wooot wooot!!!!
Amazing build. If you don’t min me asking (not sure if anyone else has asked this)…what was the actual cost of the aftermarket parts? Would love to do something like this in orange.
Cost about 4k+
Thank you!!!!🙏🏼 and for tuning in.
One word. DAMM.
U R THE MAN.
Wow what a work of art brother. New subscriber here in the beautiful Pacific Northwest out in Grays Harbor. 👍🏻✌🏼🤟🏻
Ah man!! Thank you so much!! It was a blast to build. How cool we are in the PNW🤙🏼🤙🏼🤙🏼 let's gooooo
Killer build G✊🏿
Thank you 🙏🏼
Looks awesome! Loving the green. I just subscribed to your channel. 👍👍👍👍👍👍👍👍
Thank you!!! 🙏🏼 stay tuned for the run videos
Wow that belt drive is pretty cool
Woah! That is Green Fire!
I would love to see the whole build you could do a series.
Are those aftermarket wire looms on motor?
Yes, it is just wire loom and i installed
Now thats a build!!!! cant wait to get one of these trucks...
Thank you!!
Got it yet?
Bad ass build
What gear ratio and oil weight did you use for your diffs?
60k 20mill 80k rear
1.6:1
I love the battery straps those things came in clutch on my xmaxx build🙌🏼🙏🏼
nice job dude ! cool vid
Thank you so much!!! I appreciate the good words a lot!!
@@pnwRCMADNESS i keep a eye on you !
Good to have performance/custom upgrades/reasons for it etc... and where to buy , yeahh buddy
Thank you !! I appreciate the good words!! We have a lot in stock and always getting new stuff
Bad ass rig. What fan is on the motor and how did you connect it ? I looked on your website but didn’t see it. I have the Max5 & 5690. Not done yet. Were you not able to plug fan into port on ESC where the OTA would go or do you use a splitter and connect it along with the ESC fan ? Thanks.
Hey man, im doing an XRT build inspired on your build here. I want to try your belt drive and motor mount as well. Can you tell me what gearing you suggest? What was the gearing you put in this video vs what have you had the most success with (Fast and bash)? Also, what motor mount size for the 1100kv HW G2? 25mm or 30mm? Just having a little trouble confirming numbers before I order. Thx my man!
Thank you!! You will need the 30mm screw spacing motor mount and i am
using 20/30 belt drive both 8mm bore. I also now have an 8mm HD spur shaft i offer on my site
Very nice and professional job, it became beautiful and tough.
Kindly is the esc a Max5 g2 Combo with the 5690 1250kv g2 motor because I am interested in purchasing one for my Limitless to do some drag racing with it and I do not know how it performs on a 1/7 scale that weights around 7kg inclusive of two batteries!
Awesome Xmaxx 💯
I love your build brother, you’ve made me go all the way green 😂😂
Thank you so much brother!!! I appreciate you tuning in🤙🏼🤙🏼
Hey, im having trouble finding the dust boots. Would you happen to have a link?
They are on eBay bud. I'm not sure exactly where though. These I got from someone in another build.
The 1,6 mod diff gear?? Im sure i have them in 1,5, the 1,6 was vitavon, are the 1,6 gpm New?? Theyre seem be else
I have an XMAXX and XRT - stock. Fun stuff. What would be the price for what you just built? And are you shipping to Denmark? :-)
I'm building the same but an Xmaxx right now as we speak 12s though. It's costing me more than I want to say but it will be for sale also to a serious buyer.
I can ship to Denmark as well
I consider myself as a serious buyer :-)@@pnwRCMADNESS - lets see what it ends up at - and shoot me a PM, we will figure it out. However it might be a better deal to buy all the upgrades and do the assembly myself on a new XMAXX that I buy in Europe - due to import VAT and Duties.
just wondering what was left stock? just the chassis?
Pretty much yeah. The plastics is all
Beautiful rebuild..
Thank you!!
Wow. This is an insane build!!! Love it!! I have an xrt ultimate. I don’t really bash. I like driving it fast and doing small jumps. What motor upgrades do you recommend? I’m stock. I just want to go faster.
Where did you get the seals at?
Had to buy the plastic stock cups to get them
Great car, very solid and beautiful too! How fast does it go after the upgrades?
I need that omg what a beautiful xrt
thank you!! I build them for rc enthusiasts quite often if you’re interested 🤙🏼
New subscriber love your build brother 🔥🔥🔥
Thank you so much!!!🙏🏼🙏🏼
I want the Xrt so badly guess ill have to keep my eyes out on the next traxxas linited edition release
I cannot seem to locate that 3m vinyl pattern can you point me in the right direction?
Great build.
beautiful 👍
Thank you so much!!!!🤙🏼🤙🏼🙏🏼🙏🏼
I've got 2 million in mine!!!
I know what I have in some of my 1/10 scale, I don't even want to know how much all that cost. Nice video and work, keep spending that big money so I don't have to.
So my upper stearing mount by treal isn't fitting any idea why
Of it matters I have a vitavon upper bulkhead cover seems like the prongs are a bit too big to fit tho
Because you paired it with a vitavon. It fits the stock XRT just as the description says.
Beauty!!⚡️⚡️⚡️🏆🏆🏆🏆⚡️
Thanks brother!!! It was a fun one to build 🙏🏼🙏🏼🤙🏼🤙🏼
Can you build my car like this? That would be a great service to start if u dont.
Hey @solomongathings7724
I sure can bud. Thank you for tuning in the the channel. You can hit me up on my pm on face or my website PnwRcMadness
Looks awesome ! Is that the 6mm or 8mm PET sleeve on your motor wires or another size altogether ? Gonna try to finish up my XRT over Christmas break. Thanks.
I believe it's 1/4". The first time I got the wrong stuff. I'll have to look a the package to verify
I've saved up half the price of one hopefully by next month i will get mine special edition the all black one
that’s awesome!! 😎 Uou will enjoy a lot
can you pls leave me a link for those custom motor wires?
GPM make good parts now?
Yes sir! All the new stuff coming out is all 7075 aluminum. They have all new engineers and have completely redesigned all the new stuff. They are all super nice. I'd never recommend a bad product. I thank you for tuning in as well🤙🏼🤙🏼
When i put the gpm diff gear in and put together, it blocked turning by the bevel gear...,so it was the Opposite case that you have when you need shims, u know...maybe i had get it done with some side shimms at the place were the bearings of the diff sits but i did it together then with the Stock diff gears. Dont know why, i had the vitavon Cover, the vitavon upper bulkhead and also the gpm bellcrank and the thing what Comes on tp at the bellcrank, gpm too. Maybe i dont have to Mix vitavon and gpm lol, that was unpro😂
wow. thats pretty sick. any idea how much $$$ spent on this beast? Thought I spent a lot of money on RC.
This complete with batteries about 4k ish
That's buying a new XRT to start
How much did all this ACTUALLY cost? LOL Also, I didn't really get a good look at the front. When adding the belt drive, did this truck become rear wheel drive only? It looked to me like the center mounted motor would keep if from being 4WD. If it is 2WD are there any improvements made to the speed and handling? I personally tend to prefer 4WD handling, but others might disagree.
This is going to be run right? You’re not just gonna shelf it are you?
❤❤❤❤❤❤❤❤❤best. Respect
Thank you so much!!🙏🏼🙏🏼🤙🏼🤙🏼
thats a TRX now
Thank you!!🙏🏼
Everything is sweet except those battery trays bolt heads sticking out the bottom like that will catch on everything when bash hard and do more damage the good better off to jb weld or epoxy the trays in
Thank you! Never had an issue though with them and I've sold a couple hundred sets and been using them myself now about 5 years. They do get dinged up though like the suspension part nuts do. But all in all not a complaint. If that were the case I just wouldn't sell them. I appreciate the feedback for sure 👍
WOW, really nice build but I was so afraid you was going to cut yourself the way you appeared to be rushing thru opening things :-)
Thankfully I'm ok😂 thanks for tuning in brother 🤙🏼
Wooow its awesome 👏 done ✅ subscribes bro
Thank you!! Much appreciated
I hated that I came across this video now I'm about to spend unnecessary money on mines
Oh man!! It's all worth it. Find my site and message me. I'll hook you up
❤❤❤❤
Haters = their rc came from walmart
That gpm center shaft don't fit xrt....that chassis don't even look the same...its shallower than xrt and the white block don't fit
Premium
1 million what????
One million 5😂🙈
You are way too organized
Yea right dude. People are so dumb idk how they even feed themselves now days
$3k rc