It was said before, but having different guitars and pickups helps a lot. Single coils sound really nice and bright to my ears. My noiseless Ultra Tele pickups should be fine then...
One of the best pedal demo videos. Also I want to know, why Les Paul seems muff the high pitch notes so much, is there any way to tune the Les Paul to get that brightness similar to Strats'?
If I buy it, I will have to put it before my Boss GT1000 Core, as not using any amp, and send and return from Boss are taken already in my signal chain... wonder if that would work?
I wasn't looking at the video and I recognized Radiohead's Creep. Half the time through this video I forgot I it's not a acoustic guitar! This pedal is amazing!
For this video, I only used Vox mv50 before AC simulator! So, guitar -> mv50 -> AC simulator -> Audio interface :) Hotone recommends use this pedal after preamp, but I don't have any, so use mv50 amp head, and take line output with cabinet simulator from mv50! :)
hello.... I have this Fx and I would like to know were is the best place in the pedalBoard..... and how to connect with THRU ??? Thank you if you have this message....
In the manual of it recommends us to put this pedal after preamp. That's why in this video I installed this pedal after my amp and cab sim from amp. And I figured out that my amp changes sounds too much as it is an electric guitar. So I changed to put this pedal in my pedalboard, just after compressor pedal that I use as clean boost (because I don't have any preamp), and I take xlr output to DI to pc and thru to other pedals (drive). The sound that comes out from THRU is not effected sound. My plan was when I use AC sim, I use xlr DI, and use thru for usual electric guitar sound. Well, after that I thought 'anyway I will not use AC sim and EG sound at the same moment' therefore I changed from thru to trs output and used thru for tuner. I still think the best position of this pedal will be just after all the clean boost/preamp pedals :) And reverb from DAW plugin.. but I think if you have a good reverb pedal then it also can be better use reverb pedal after this.
@@hanho-hanho thank you !!!! For youre answer i will trying it in my Daw ... and after in my Hugues and Kettner Combo Tube Meister 18.... i'll telling some feedback ...
![Victory Amps MK Clean & OD [With Martin Kidd & Lee Anderton]](http://i.ytimg.com/vi/PgKHBpHKQ-g/mqdefault.jpg)
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
I've watched a bunch of demos of the pedal. This was the best so far, and the one that convinced me to buy one before the video was even over. :)
It was said before, but having different guitars and pickups helps a lot. Single coils sound really nice and bright to my ears. My noiseless Ultra Tele pickups should be fine then...
In every case, the Strat middle pickup sounds best to my ears. Closest to and actual acoustic guitar sound IMHO.
Thanks! Nice work!
One of the best pedal demo videos. Also I want to know, why Les Paul seems muff the high pitch notes so much, is there any way to tune the Les Paul to get that brightness similar to Strats'?
좋은 영상 감사합니다. 실은 제 베이스기타로 조금이나마 어쿠스틱베이스같은 느낌을 가미해보려고 이 제품을 살까 생각중인데 혹시 베이스기타로 이 페달 14번, 15번 베이스 시뮬레이션 사용해보신 적 있으신가요?
adjust the frequency interval in preset can be useful
Man you're giving me a big push to buy this pedal!
If I buy it, I will have to put it before my Boss GT1000 Core, as not using any amp, and send and return from Boss are taken already in my signal chain... wonder if that would work?
I wasn't looking at the video and I recognized Radiohead's Creep. Half the time through this video I forgot I it's not a acoustic guitar! This pedal is amazing!
연주잘들었습니다! 이펙터페달보드에연결시 어디에 연결해서 쓰시나요?
전에는 부스터/다이나믹 계열 바로 뒤에 넣고 xlr 아웃으로 뽑았었습니다 그래서 앰프로 가는거 하나 빼고, 하나는 바로 믹서로 갈수 있게요 :) 근데 최근에는 시뮬레이터의 한계를 느껴서 그냥 클래식기타를 하나 샀네요 :)
Where in my pedal train should I put it?
Honestly I don't know well, I use before drive pedals and make separated DI output
I usually put acoustic sims before dirt or after modulation. Either can produce cool sounds. But it’s honestly just whatever you prefer sonically.
may i ask your guitar signal chain for this video?
For this video, I only used Vox mv50 before AC simulator! So, guitar -> mv50 -> AC simulator -> Audio interface :) Hotone recommends use this pedal after preamp, but I don't have any, so use mv50 amp head, and take line output with cabinet simulator from mv50! :)
oh no, I got copyright claim for milonga..
hello.... I have this Fx and I would like to know were is the best place in the pedalBoard..... and how to connect with THRU ??? Thank you if you have this message....
In the manual of it recommends us to put this pedal after preamp. That's why in this video I installed this pedal after my amp and cab sim from amp. And I figured out that my amp changes sounds too much as it is an electric guitar. So I changed to put this pedal in my pedalboard, just after compressor pedal that I use as clean boost (because I don't have any preamp), and I take xlr output to DI to pc and thru to other pedals (drive). The sound that comes out from THRU is not effected sound. My plan was when I use AC sim, I use xlr DI, and use thru for usual electric guitar sound. Well, after that I thought 'anyway I will not use AC sim and EG sound at the same moment' therefore I changed from thru to trs output and used thru for tuner. I still think the best position of this pedal will be just after all the clean boost/preamp pedals :) And reverb from DAW plugin.. but I think if you have a good reverb pedal then it also can be better use reverb pedal after this.
@@hanho-hanho thank you !!!! For youre answer i will trying it in my Daw ... and after in my Hugues and Kettner Combo Tube Meister 18.... i'll telling some feedback ...
@@hanho-hanho I can connect the THRU in the OUTPUT of my Tunner ?
@@nicolasehretsmann No, THRU is sort of output. So it cannot go through output of Tunner. It should go in input of tunner. :)
@@hanho-hanhogreat demostration sir, but I am bit confused on that "EG" word you used, were you referring to EQ?