Best Swiss Army Knife Alternatives: Victorinox Vs The World!

Поделиться
HTML-код
  • Опубликовано: 8 сен 2024

Комментарии • 478

  • @christianboddum8783
    @christianboddum8783 3 года назад +133

    Victorinox Huntsman in my pocket since 1977 - every day ;-)

    • @BloodyMeridianM8
      @BloodyMeridianM8 3 года назад +4

      How many did you go through and how was the warranty with them? Being that you’ve always had one

    • @christianboddum8783
      @christianboddum8783 3 года назад +7

      @@BloodyMeridianM8 I can't remember precisely but I'd say 6-7 at least, you know a few just got away. I think I've had to use warranty only once, and that was in relation to the little spring on the scissors. Other than that this is a for life purchase if you treat it right. Even the saw I've used to saw over metal pipes without damaging the teeth!!

    • @billythepigeon7345
      @billythepigeon7345 3 года назад +2

      One of the best models, I have a few myself. A standard one that used to be my edc for many years, an old one that's been modified specifically for carving/bushcraft purposes, and a couple of limited edition models. I carry a cyber tool lite these days as the tools are very useful at work, but it's too thick for pocket carry so it's in a pouch on my belt. Can't beat victorinox, and the huntsman is a great all round model. If they get around to releasing a PS version I'll probably end up getting that too.

    • @billythepigeon7345
      @billythepigeon7345 3 года назад

      @@BloodyMeridianM8 I've had my huntsman for years, never had a warranty issue, or breakage, although it can happen if abused, or sharpened a lot and the blade needs replacing. I did bend the saw once, but I just bent it back and it's still good. They'll give your knife a full service for a small service charge, but you'll also have to cover shipping, replacing any broken or worn parts, and the scales. Luckily for me I can get to their flagship store in London quite easily so I can dodge the shipping costs.

    • @BloodyMeridianM8
      @BloodyMeridianM8 3 года назад +1

      @@billythepigeon7345 thank you!

  • @reasonablenamehere
    @reasonablenamehere 3 года назад +10

    My newborn daughter and I have been catching up on some David C. Anderson (Coming at us from the KnifeCenter!) at night to give my wife a chance to get some rest. Big shout out to David for giving the two of us entertainment while simultaneously helping me write up my Christmas list. ;)

    • @knifecenter
      @knifecenter  3 года назад +2

      Start 'em young! -DCA

    • @carbonitegamorrean8368
      @carbonitegamorrean8368 3 года назад +1

      @Freddie Hey! new dad:
      First off; Please have a Very Merry lil'gurley's 1st Christmas,,,
      Second; May God bless her existence & help guide you the next two decades,,,
      Last; Keep her safe as you watch your six, please...
      Have more than a happy, healthy, growing, Happy New Year.

    • @reasonablenamehere
      @reasonablenamehere 3 года назад +1

      @@carbonitegamorrean8368 Thank you very much! You have a Merry Christmas as well.

  • @name5949
    @name5949 3 года назад +15

    I've had a Swiss army knife in my pocket form when i was a young boy 30+ years on I've still got a Swiss army knife in my pocket right now because they have stood the test of time outstanding work of art thanks for sharing this with us Pal 👍

  • @gizmocarr3093
    @gizmocarr3093 3 года назад +17

    Multi-blade pocket knives like Cub and Boy Scout ones are just cool to have. You have to like their looks even if you tend to prefer modern knives. One thing about Swiza knives is all the parts are polished inside and out. Being made of modern materials; you can wash them with soap and water and drop a little oil on them and keep them clean and sterile. Besides they open and close easier than others do. A cork screw works for other things besides bottles. You can loosen tight knots in Paracord and that comes in handy more often than wine corks do. The awl on the Swiza opens boxes and plastic shrink packaging better than a knife blade and it works to cut out patterns in paper among other things too. Thanks for bring the Boker modern line of multi-blade knives to my attention. I already have Swiza models I bought from KnifeCenter. I hope to see more Swiza models because they are lots more than the ones you offer now.

    • @knifecenter
      @knifecenter  3 года назад +5

      I've never opened a wine bottle with a multi-tool bottle opener, but I've used them several times untying paracord. Helps my sausage fingers out a great deal! -DCA

    • @gizmocarr3093
      @gizmocarr3093 3 года назад +6

      @@knifecenter When I was young: I discover inside a bottle of wine hides a lot of love if you know what I mean. I have been fond of corkscrews ever since I learn this secret.

    • @Mark-uo4nf
      @Mark-uo4nf 2 года назад

      I made it life scout. I grew up in middle Tennessee. Fast forward, and I found myself homeless. A 5 dollar Ozark trail scout knife/swiss army was a life saver. I can't tell you the number of camps built and alcohol stoves made with it. And yes, lol, I have opened wine bottles with it. It's wonky, but it works. 🤷

  • @SlapShotRegatta22
    @SlapShotRegatta22 3 года назад +65

    Some great options here but I really wish these manufacturers would scrap the corkscrew in favor of a phillips driver. I mean honestly, how often do you find yourself in a situation where you have a wine bottle with you but no corkscrew? Given the hard working nature of these knives a phillips would be far more useful.

    • @daadadda
      @daadadda 2 года назад

      Funny how I would totally see that differently! The cork screw is a life- and money saver on travels! Most hotels close their reception at night (and even if you find someone there to ask a corkscrew of him, sometimes to no avail) just when you returned with working colleagues or your significant other after a night out and you wanna open that last special bottle between the two of you on the balcony but CORK-BLOCK!, there goes your chance for a pay raise or signifiying your other 😛. Some countries have a wine culture you don't wanna miss out on as a tourist, but trying them out in restaurants or hotel bars can get quite costy while a corkscrew unlocks the possibility to buy for non-tourist regular supermarket prices while on the go. Also, the element of spontaeneity it brings along is so great, spontaneous wine-outs are the best and girls love it. Get a bottle and have a sit in the beautiful park you just came across since you have an hour to kill, hey no problem! Ever found yourself to be the one sent to pick up more drinks for a group of friends and unsure if they have a corkscrew where you go while you stare at the shelf? CORK-BLOCKED, you'll look so generic bringing those everyday beercans 😀
      I never found myself in a situation where a single rather small phillips screwdriver on my EDC would have made a huge difference, especially since most of the other knive tools can work as improvised screwdrivers easily. Plus, keep in mind that the cap lifter/bottle opener fits just right into bit-adapters. So instead of relying on that one small phillips screwdriver in their victorinox, most craftsy guys add a small container with said adapter and a variety of bits on a keychain to their knive, which then indeed can make a huge difference in some situations.

    • @artstep9661
      @artstep9661 Год назад +8

      I prefer corkscrew, because I can untie ropes, shoelaces etc, as for phillips screwdriver i prefer it would be like in victorinox hunters lite, much more places where you can use it then then screwdriver in place of a corkscrew and it is in t shape.

    • @CNrite
      @CNrite Год назад +2

      @@artstep9661 absolutely agree t handled 3” talk screw drivers are useless. You need the one from the explorer that comes out on end. Never thought of the other uses for a crock screw either

    • @igrim4777
      @igrim4777 Год назад +4

      I used to think that way too. Then I got one. Almost completely useless as a screwdriver, short reach, too wide to fit almost anywhere but the outside of a flat object, hard to manipulate, doesn't naturally align with your finger so harder to get the bit in the screw with limited visibility, of which it blocks almost all.
      With a normal screwdriver you can relax your grip while keeping pressure with your palm or fingertips on the butt retaining the driver bit in the screw, then rotate your hand so you can twist the driver again. Try that with a wobbly short t-handle sideways inside your car's engine bay to change a lamp, if it can even reach the screw in the first place.

    • @ironman2326
      @ironman2326 Год назад +2

      I've had it happen a few times at the hotel with my wife.

  • @natek1993
    @natek1993 3 года назад +16

    I'm a big fan of the MKM Malga multi tool. Love the swiss army style knife but having m390 makes it great.

  • @jonc8074
    @jonc8074 3 года назад +7

    The Swiza with tick tool should be a serious contender for anyone's EDC in Lyme disease country

  • @shakes00lude
    @shakes00lude 3 года назад +3

    Leatherman Free T4 fan here. Chunky but it carries well and has a surprisingly useful everyday tool set.

  • @blueeyeswhitedragon9839
    @blueeyeswhitedragon9839 3 года назад +5

    It is worth mentioning that the Swiza knives have stainless steel liners/separation spacers as opposed to the Swiss Army Knives that use aluminum liners. The exception to this is the SAK issued to the Swiss, German and American military, which also uses stainless steel liners.
    The use of stainless liners add a bit of weight but definately increases strength.

  • @Hexsyn
    @Hexsyn 3 года назад +53

    More of this please, whenever possible. This is my jam.

    • @FabianVasquez6
      @FabianVasquez6 3 года назад

      💯

    • @kylethedalek
      @kylethedalek 3 года назад

      Love it to, but I’m really wanting a Victorinox or a tool with a similar style, that has a one handed opening blade.
      Would love to get one that is a slip joint and a locker.
      Maybe on the slip joint do a similar thing to Spyderco with the finger Choil.
      And keeps the blade about 3” or less for guys that have crap laws.
      I don’t suppose you know of any companies that make such tool?
      I think the Boker tech tools are just begging for a thumbstud.

    • @psykikninja
      @psykikninja 3 года назад

      @@kylethedalek victorinox has multitools with locking main blades.

  • @herthaboomer2
    @herthaboomer2 3 года назад +20

    A seriously nice collection. It's just cool to see, that there is way more companies then just victorinox out there.
    Thanks for that vid.
    Just one correction here. The blue swiza knife you held up was actually the D04. The uneven numbers mark the models with the cork screw on the back, the even ones have the phillips screw driver instead. Now, that's rather an addition then a correction, but probably handy to know. Of almost each model line there exists a children's version with a rounded tip, plus by now there is even more different scales available (depending on the model line).

  • @HansYolo82
    @HansYolo82 3 года назад +22

    What do we learn from this nice video. Victorinox is still the best. He sais he carry one every day and so do I. My knife of choice is the tinker. Small enough for edc and all the tools I need.

  • @lallawmzuali5217
    @lallawmzuali5217 2 года назад +1

    Swiza has alot of blade play. I love the one hand main blade opening.

  • @WilliamWallis
    @WilliamWallis 3 года назад +9

    The hammer / opener @ the end of the Gerber tool seems like it would be good for opening / closing paint cans.

    • @quinnsd13
      @quinnsd13 3 года назад +3

      I like my armbar but hadn't thought to use it for that. Just went tested it out. It worked fine on full size cans, but slipped a bit on smaller cans of wood stain. The pry section is slightly rounded so it was hard to get a good purchase on the lip. Closing both worked great (as any impact would). Another unexpected use for that part is that I tend to fidget with it. It has a very satisfying snap/click to it.

  • @pmwizard48
    @pmwizard48 3 года назад +6

    I carry a Swiss Army knife everyday. Started with a Wenger and now use the Victorinox.

    • @shawnpepin7890
      @shawnpepin7890 3 года назад +1

      I have a few Victoria Knox models, but still can’t bring myself to shelf my original vintage Wenger with locking main blade... still the only SAK like tool I’ve owned with a locking blade

    • @JustIn-op6oy
      @JustIn-op6oy 3 года назад +1

      @@shawnpepin7890 you should check out the victorinox Rucksack and Forester models. Both have locking blades and a more ergonomic grip than the typical SAK.

  • @guycalgary7800
    @guycalgary7800 3 года назад +7

    Swiss army/victorinox and leatherman’s are something I don’t seem to look for or collect but I have a few of both .

    • @JustIn-op6oy
      @JustIn-op6oy 3 года назад

      Glad I'm not the only one this happens to; I don't actively collect either SAK or LM products but somehow I have ended up with 3 leatherman tools and 5 or 6 SAKs. I don't think I purchased any of them, they were all gifts, items I inherited, or were lost items that I came across.
      While I don't "carry" a SAK, I do always have one with me. In one of the pouches of my day-pack I always have an explorer model (with a BSA fleur-de-lis logo on the scale) and a leatherman PST-II.

  • @sjbolton72
    @sjbolton72 3 года назад +3

    Thanks for the great practical comparison. Personally a Victorinox is something every knife enthusiast should have in their collection, however they are so varied I feel its a personal choice thats needed to decide the right one for you. Ie they aren’t always good gifts except maybe a basic model. I bought mine 30yrs ago, it was the thick one with all the bells and whistles. But its too heavy to carry, never been a belt wearer so it ends up living in my travel/work bag at the time so never “at hand” when I needed a tool. A few years ago, around the time I lost the use of my left arm & leg I needed a lighter practical “swiss army knife” to keep in my pocket and went for the Swiza D03.
    Just wanted to add my use experience of this knife. Having only one hand to use I’m glad you pointed out the fingernail slits are a little proud of the body than you’d expect making it easy to get my finger tip flesh in and pry the tool out easily. This has not led to damage to my finger tips over time. I use this knife a lot. The odd rubber/plastic grip is reassuring to hold and it seems to help avoid it slipping out of my pocket when i sit down. Its also surprisingly “warm” to the touch even in winter and its been sitting on a desk/bench for hours. Its just always comfortable to hold and use and having only the one hand now its important for me to be able to feel confident in the tools I’m holding and using for safe control. I’ve always found Victorinox blades to feel too flexible for me to trust at times I needed to apply more force. The Swiza is more stiff, again giving me confidence. The blade holds its edge really well. The action of the tools opening and closing as well as the unlock button has not deteriorated over time. Its just a reliable tool all round without any of the gimmicks others put into their models that have no real function, its functional simplicity and I went with the D03 model because of the flat and philips head screw drivers, I dont need all the other widgets you can find on other makes and models so i’m not paying for stuff i know I dont need. Like I said i still have my 30+yo Victorinox with everything if i want to show off, but after having a stroke, boasting is not part of my life I waste time on. I appreciate good solid practical designs that will last for what time remains for me. I couldn’t care less how well designed the packaging is on stuff. A tool should remain a tool specific to your needs and one thats close at hand the moment a need arises is really the best one for you. The Swiza has been trouble free and i’ve rarely had the need to sharpen it, when I got it I added a tiny dab of Super Lube to the tools and worked that in for a bit, but never ever had the need to clean grit or disassemble it. Only sharpened a couple of times. So while David covers much in his videos, he cant have personal day to day usage experience of ever tool and knife over years to indicate how they stand up to tasks and what sort of maintenance burdens they can become. There are so many confusing choices on the market with many gimmicks and fad pitches for your money.I hope this might help some of you decide what suits your needs. Cheers.

  • @TheGrenadier97
    @TheGrenadier97 3 года назад +6

    Victorinox remains champion in this kind of multi-tool and set a good and firm foot on the plier-based world, BUT, some brands appeared with solutions in a similar vein as this video showed, which helps in competition to remember Victorinox that they were not alone and can't relax.
    Great show and presentation sir. Merry Christmas, still time.

  • @MrMikeyt65
    @MrMikeyt65 2 года назад +1

    My mom bought me a Victorianox tinker for Christmas a few years ago and I have it with me every day.

  • @daninmi1648
    @daninmi1648 3 года назад +14

    Though nothing will replace a Swiss Army knife for me (as I've been carrying one for 30 years), this was a great presentation. BladeHQ are insufferable now!

    • @TheTrueNorth11
      @TheTrueNorth11 2 года назад +4

      He means they’re all dumb slobs. And he’s right.

    • @theblackmamba116
      @theblackmamba116 2 года назад +6

      @@delightfulgenius4635 I think he means their presenters are goofy and aren't as professional as knifecenter

    • @daadadda
      @daadadda 2 года назад +2

      I so agree! BladeHQ is mixing so few infos into so much random, non-related ramble! I think a good counter example of guys who get it just right with their goofyness and comical aspect are the boys from "dutch bushcraft knives", hilarious! But you never feel betrayed of your time, while you often do with BladeHQ.

    • @markcoffman494
      @markcoffman494 2 года назад +1

      I’m sorry to say but I agree, BladHQ is no an infomercial channel.

  • @granthaller9544
    @granthaller9544 3 года назад

    I carried a Victorinox climber on a bike tour in England and France. I used every tool, especially the corkscrew! My EDC now is a CRK small Sebenza and a SAK classic SD in my jeans watch pocket.

  • @adamyorke7869
    @adamyorke7869 3 года назад +8

    Swiss Army was the first pocket knife I ever owned. I was 11. Dude, you voice is so mellow. You should do books on tape for people that want to doze off while learning something.

  • @Regolith86
    @Regolith86 3 года назад +8

    I'd definitely like an MKM Malga without the fork or corkscrew. I was sold on the Malga 6 right up until I saw those.

    • @SlapShotRegatta22
      @SlapShotRegatta22 3 года назад +1

      Agreed 100% I mean come on! A cocktail fork?? What?!?

  • @lukasblum8051
    @lukasblum8051 3 года назад +1

    I am Swiss. Here in Switzerland, everbody groes up around Victorynox. All boys get one for their birthday, when they are still quite young. It was the same with me. Them beeing so normal, I developped an attitude that they are somewhat unsexy. Single blade folders, fixblades and everthing that looks "tactical" seemed way more of taste. But today I must say: I still love other stiles better. But a Victorynox (or other multitool) is the only knive I ever really use. I live in a City, I work in an office. I don't go bushcrafting. So basically, I only need a knive to cut and apple and a piece of cheese for snacks. And I am glad to have twizzers and scissors. Other knives for me are just for the liking, for collecting. Also: In almost any situation I normally find myself in, a multitool is the only thing I could pull out my pocket without somebody raising an eyebrow. As a Victorynox really is perceived as a handy tool, and by now means as a weapon.

  • @daddlkernyus5462
    @daddlkernyus5462 3 года назад +2

    It's very nice that you Show some alternatives. It's not about what is better, it's about what someone need or want!
    For me the quantity and the quality of the very conceived tools in the same size category in combination with history of those SAKs, the price-performance racio and the lifetime guarantee is unbeatable! I love Victorinox!
    But they are all very nice EDCs!

  • @hardrockbeat
    @hardrockbeat 3 года назад +4

    Was looking for a good EDC gift. This video made me aware of the Gerber Armbar and earned a thumbs up immediately. Buying two! Thank You!

  • @MerpSquirrel
    @MerpSquirrel 3 года назад +1

    I use the gerber dime which is very nice and useful. Been using it as a mini EDC for 3 years now and it has been very useful and held up.

  • @ThorDyrden
    @ThorDyrden 3 года назад +1

    Have one of the last Wenger's ... when I heard this traditional manufacturer of the army-knive (in deed Victorinox and Wenger are the two swiss companies, which supplied the "original" army-knive since the 1890s) would vanish and be integrated into Victorinox I needed to get one of their knives with the "push the swiss-cross to unlock" feature ;-)

  • @bobr7773
    @bobr7773 Год назад +1

    I would be very interested in a knife similar to the tinker but with better blade steel.
    Key features:
    A large and small blade
    Tweezers toothpick would be nice too
    Can opener
    Bottle opener
    Phillips & flatten head a bit holder would be awesome
    Bottle opener
    Textured scales would be awesome

  • @woweixiaomiandui
    @woweixiaomiandui 3 года назад +1

    My first knife I remember getting was a Victorinox grand prix when I was about 6 years old. Since then I've basically only carried a Victorinox. I retired the grand prix after my military service and use now a modified tinker deluxe or executive

  • @VaansWorld
    @VaansWorld 3 года назад +2

    I love these videos. This is how you make a knife video! No bs, no macho/marine wannabe garbage, just the love for a good knife.
    Subscribed!

  • @Shadow_Hawk_Streaming
    @Shadow_Hawk_Streaming 3 года назад +68

    Imagine the money a company could make selling "build your own" more where you put the different tools and a chassis into a basket and make exactly what you want

    • @TheKronikone
      @TheKronikone 3 года назад +4

      Victorinox already offers that

    • @Shadow_Hawk_Streaming
      @Shadow_Hawk_Streaming 3 года назад +2

      @@TheKronikone do they? Got a link? First I've heard of this

    • @JustIn-op6oy
      @JustIn-op6oy 3 года назад +1

      @@TheKronikone thank you for posting that, I'm going to check that out right after the video.

    • @Trev794
      @Trev794 3 года назад

      The only thing is none of them feel right for me apart from the camp knives.

    • @milchpulverkakao4917
      @milchpulverkakao4917 3 года назад +1

      @@TheKronikone As far as i know you can only choose the scales.If you have a link pls send it in

  • @grievingsage1899
    @grievingsage1899 2 года назад +1

    SAK all the way everyday. An EDC just for me, it just has to be! Seriously though, good video. Well thought out and professionally made. A rarity these days.

  • @Kilt_Camera_and_Carry
    @Kilt_Camera_and_Carry 3 года назад +1

    I use that MKM pouch for my Giantmouse GMF1 and CRKT Minimalist for pocket carry ... It works great!

    • @wretchpin
      @wretchpin 3 года назад

      I also have that mkm pouch. Works great for my alox pioneer x!

  • @Case16710
    @Case16710 3 года назад +2

    Man, my thumbnails hurt just watching this!
    Thank you for your sacrifice.

  • @boogboog8097
    @boogboog8097 3 года назад +31

    Knife expert carries the victorinox, job done, say no more lol

  • @jaynone9262
    @jaynone9262 3 года назад +1

    Love my multi tool swiss knife.Bought it about 25 years ago.Very easy to sharpen but also it is very easy to dull.Seems ever knife I have ever owned is either hard to get a razor edge or easy.There is not much of a middle ground .I do prefer knives that are easily sharpened..

  • @vf19blue
    @vf19blue 3 года назад +2

    Another great video David, I liken these to story time when I was a kid :) I just sit back and listen with great joy.
    Hope you and yours have a wonderful Christmas, best wishes from Australia.

  • @willblake72
    @willblake72 3 года назад

    Leatherman PS is a great tool. There's something comforting about knowing you've got some kind of tool in your pocket, even if it's bladeless.

  • @alsalieby1981
    @alsalieby1981 8 месяцев назад

    It is good to know the alternatives of SAK however to get same options from these brands it will cost more than SAK , but really thank you for the added knowledge.

  • @cardiacbob
    @cardiacbob 2 года назад

    The Leatherman Free T4 lives in my pocket these days. But I also have a Victorinox classic on my Keychain! And I carry the Classic through TSA every time I fly for years now.

  • @fstath
    @fstath 3 года назад +6

    I know all of those tools and I own most of them. However, I watched the whole video and I have to say that it's a great resource. Keep up the good work David!

    • @knifecenter
      @knifecenter  3 года назад +2

      Much appreciated Fotis! -DCA

    • @blindmelonlemonjello
      @blindmelonlemonjello 3 года назад

      @@knifecenter I'm almost positive 12C27 is what victorinox uses also. And every knife out of switzerland. But I could be wrong.... Enzo uses it also.

    • @knifecenter
      @knifecenter  3 года назад +1

      @blindmelonlemonjello - VIctorinox uses 1.4110 aka X55CrMo14 as standard for the blades on the Swiss Army Knives -DCA

    • @blindmelonlemonjello
      @blindmelonlemonjello 3 года назад

      @@knifecenter cool thanks DCA I'll check it out!! That's new steel verient to me. From my experience the older wengers seem to have better edge retention. I've got a teton and century models.

  • @preppysquirrel9712
    @preppysquirrel9712 3 года назад +1

    Very cool. I habe graduated to larger multi tools over the years amd keep one in my purse with ita two sleeves of bits. I miss a pocket tool however and planned to replace my orig leatherman with scissors. Now I see there are better alternatives with locking tools. This helps woth knuckle busting. Thanks for an informative video.

  • @kisavracar
    @kisavracar 3 года назад +4

    SAK is one and only!

  • @vcupiano
    @vcupiano 3 года назад

    First knife I ever received while in the Boy Scouts. Still have it and the nylon case it came with nearly 30 years later.

  • @DBEdwards
    @DBEdwards 2 года назад

    I really like that Boker genuine Stag. Gorgeous and crafted. I own a Victorinix super thick army knife. It can do most anything except cook you a steak dinner. Great show. It is obvious you are expert at this and very well spoken

  • @sal1964
    @sal1964 3 года назад +5

    You do a great job very informative much better than blade hq

  • @mygoldfishrocks
    @mygoldfishrocks 2 года назад

    A few years back, I had ordered the swiss army knife the had the little pharmacist's scoop. I returned it, but wish I didn't. It's so useful for picking up little things (organizing flower seeds or rhinestone, etc). The best knife I think has a flashlight. I used that every day. Tweezers are nice. I wish swiss army made a little one with pliers. Years ago, I remember seeing replacement toothpicks for swiss army knives that were stainless steel. I can't find them anywhere anymore. I guess it's easy enough to grind a metal toothpick down to the size of the plastic ones..

  • @kikoi15
    @kikoi15 3 года назад +1

    i’ve had my victorinox champ for 35 years .. still works ..

  • @robbyddurham1624
    @robbyddurham1624 3 года назад

    my favorite knife is for when I'm fishing. It has a blade and a hook out. Both are very useful for when I'm crappie fishing.

  • @charlescollier7217
    @charlescollier7217 3 года назад +1

    Thank you, DCA. I had NO idea the larger Clip-a-Tool even existed. And I have completely overlooked the Leatherman Free series. I need to rethink that. On an interesting note, Ruike has a set of multitools that parallel the Boker Tech Tools - in fact, I think they make the Bokers.

    • @vf19blue
      @vf19blue 3 года назад +1

      Yes, I have had the small Ruike on my keyring for about two years, use it at work sometimes when I temporarily misplace my Zancudo. They cut like the devil and very sturdy for the price. Hard to get some stuff here in Australia though unless you want to pay insane prices.

  • @markfcoble
    @markfcoble 3 года назад +3

    Thanks. Enjoyable reviews. Skeltool is perfect for me as small, easy multi tool. Clip to belt is great feature.

    • @blueeyeswhitedragon9839
      @blueeyeswhitedragon9839 3 года назад +1

      James Madison :- I don't use the pocket clip on the Skeltool, so I place an extra driver bit under the clip (secured with some electrical tape)...gives me six different bits. Leatherman sells the extra bit kits in Imperial (US), or metric with Robertson style bits.

  • @Wanderer509-
    @Wanderer509- 3 года назад

    I’ve carried a leatherman crater c33t for 4 years now, love it, no extra bullshit. Sadly they discontinued it, glad I bought a spare!!

  • @etherealicer
    @etherealicer 3 года назад +5

    Swiza might be old as a company, but they only started producing knives a few years ago. Oh and I just was playing with my 1-layer Swiza (main blade + awl). When closing the awl, my thumb pushed the blade over and it crossed path with the awl, yikes.

  • @albertoneri5427
    @albertoneri5427 3 года назад +9

    there are a lot of multitools around the world, but what you get with victorinox, for what you pay, is better than the others. here,in italy leatherman is to expensive, in the us for sure you can fairly compare all the brands

    • @brettwarner719
      @brettwarner719 3 года назад +4

      That’s too bad for you. Having used both the Leatherman is king. The higher end models come with steels like S30 and it is just more versatile

    • @nicks931
      @nicks931 3 года назад +1

      Agree with Mr. Warner for USA customers. I love my SAK's and have a Swisstool whose lock broke early on. Try getting warranty service here in USA. Very disappointing but I still use it. But my Leatherman's? No failure yet on any of them, small or large, and I have an "original" when it was their only model still going strong after what, maybe 30-ish years?

    • @albertoneri5427
      @albertoneri5427 3 года назад +2

      don't misunderstand my post, i've many leatherman (both s30v or 420hc) and many victorinox. leatherman is not king as it isn't victorinox. both make good products and also not so good products. leatherman s30v is not a miracle, sometime i prefer to have the vic steel that i can resharp everywhere with everything. if you analyze the price,the vic quality for what you pay is something hard to find somewhere else

    • @billythepigeon7345
      @billythepigeon7345 3 года назад +1

      @@nicks931 my leatherman wingman broke, took a beating and the main blade lock stopped engaging properly, getting it serviced would have cost me a bit as I'm in the UK. No problem though, I fixed it, with my victorinox. It's funny how people's experiences can be so different. I must admit, I love my Surge though, great tool, very versatile, but seriously heavy, could make a good boat anchor, so that's a pack tool only for me. Edit, the scissors on the wingman are crap too, although the ones on the surge are great.

    • @billythepigeon7345
      @billythepigeon7345 3 года назад +1

      Tbh, I don't think SAKs and plier based multitools are really comperable. They're different classes imo, Victorinox is the boss when it comes to SAKs, and leatherman dominate in their own field. I'm a fan of both companies, and own multiple models from both.

  • @retnav92
    @retnav92 3 года назад

    Recently ord'd (sorry, from different source) two of the Leatherman Free T4's. One as a gift for a family member to carry in her purse, and one for me. Dad was Army, so as kids we had the old military-issue Camillus "multi-tools". What I like about the Leatherman T4's are they're US made, locking blade/tools, and.........no corkscrew. :)

  • @shazarkanhai4399
    @shazarkanhai4399 3 года назад +5

    This was such a great video! I have both the Sypderco Clip-It (serrated second blade), and the Leatherman PS which has traveled with me around the world. I use them almost daily! In fact, I combo the Leatherman PS with the Victorninox Cadet, and that's been my go-to for the past several years without fail!

  • @inregionecaecorum
    @inregionecaecorum 3 года назад +1

    Swiss Army Farmer X is my goto knife, but I do have a Spyderco clipit with a screwdriver and bottle opener which gets used a lot

  • @Chrisandknife
    @Chrisandknife 3 года назад

    My favorite is the Böker Tec Tool.

  • @jakefromohiostate
    @jakefromohiostate 3 года назад +1

    Well David C. Anderson you have hit on my height of knife collecting...I LOVE multitools! Like you I always have a Swiss Army Knife with me. And I always look for “the next”. Several of these I have owned, HOOOWEVER that MKM is sort of on my list, as you mentioned I would love to see some different tools. The Spyderco you listed last is my absolute favorite multitool. It checked off every box I was looking for. It would be cool of them to revisit that design and change some tools around OR offer a better blade steel, I wouldn’t hesitate to buy that. Thanks DCA!

    • @knifecenter
      @knifecenter  3 года назад +2

      You are welcome Jake from State Farm!... err, Ohio State! :D -DCA

  • @ironman2326
    @ironman2326 2 года назад

    I really like Victorinox and have really come to like the Wengers as well. They each have their own pros and cons. Love them both though.

  • @rocko2753
    @rocko2753 3 года назад +17

    David is the knife professor, while the Blade HQ guys are the students cutting up in the back of the class.

    • @albert333pool
      @albert333pool 3 года назад +2

      Ouch.... Good one though lol... This convinced me to subscribe! 👍

    • @kaufmanat1
      @kaufmanat1 3 месяца назад

      Haha! Awesome

  • @jeffmarshall7180
    @jeffmarshall7180 3 года назад +3

    I have been carrying a Gerber Armbar and it is easily become my favorite multitool, that full size bit driver is killer, I do wish they had either a half stop or locking mechanism for the driver but it’s a small complaint

  • @snellaltal
    @snellaltal 3 года назад +1

    Love the scout knife setup. Have an AG Russell pro scout that I rotate into my EDC along with the alox farmer from victorinox. Very useful secondary knife and even primary when in the office.

  • @thomasturner4253
    @thomasturner4253 3 года назад

    Have had a Swiss army knife since I was in the military Use it every day

    • @ChatGPT1111
      @ChatGPT1111 3 года назад

      So…..was that yesterday, a month ago or 60 years ago?

  • @If-ish
    @If-ish 3 года назад +44

    So many of those come close to being great, then they blow it.

    • @SlapShotRegatta22
      @SlapShotRegatta22 3 года назад +10

      Agreed! The Malga? A cocktail fork? What?!?
      The formula is simple. Main blade, bottle opener, can opener, maybe a phillips, maybe a saw. Come on guys!

    • @teddyperkins3406
      @teddyperkins3406 3 года назад +3

      @@SlapShotRegatta22 the fork was the selling point for me, but then again, Im a classy fella. its all fun and games until youre offered fancy cheeses without toothpicks in sight

  • @daadadda
    @daadadda 2 года назад

    Guess it shows the dominance of the brand Victorinox when it takes a German guy like me to come across a video from you U.S. guys to make me even realize there is a German brand (Böker) producing comparable EDC pocket knives whose steel is even tougher.. I'm ashamed and amazed at the same time :D Many thanks for introducing me to them!

  • @shaunbarnett2972
    @shaunbarnett2972 2 года назад

    Dave C Anderson is the Bob Ross of the knife world. So calming just listening to his knife reviews.

  • @tomyslaf9521
    @tomyslaf9521 3 года назад +91

    Only alternative to a SAK is another SAK 😜

    • @AnonymousUser-bp9no
      @AnonymousUser-bp9no 3 года назад +6

      Agreed. Just ordered an SAK as an alternative to my SAK 😂

    • @backrowbrighton
      @backrowbrighton 3 года назад +2

      Absolutely. I carry a Tinker in my pocket and have a Classic on my key chain.

    • @parts7959
      @parts7959 3 года назад +1

      You got that right🤙🏻🤙🏻🤙🏻

    • @parrottf-1180
      @parrottf-1180 3 года назад +1

      Agreed, but their steel realy sucks. 20 years+ with a tracker/soldier as my workknife and anything more then cardbord means rhe whetstone.

    • @SonnySoltero
      @SonnySoltero 3 года назад +1

      Got them in all sizes. and the only knives that equal my Victorinox' are my Wengers.

  • @aaronwilliams007
    @aaronwilliams007 Год назад

    The glass breaker on the Boker is definitely cool

  • @dontwobble
    @dontwobble 3 года назад +2

    Leatherman skeletool should definitely have been there. Simple one handed opening knife, pliers and screwdriver, what more could you need.

    • @globetrotter7778
      @globetrotter7778 Год назад

      My personal favorite. The CX in particular with the 154CM blade.

  • @RobBernhard
    @RobBernhard 3 года назад +3

    This is great. Still have my Scout knife from many years ago. I daily carry a SAK Hiker but I'm glad to see you feature these alternatives and options. I'm throwing a few smaller ones on my wishlist for when I need to get the cart up to that free shipping. 😄

  •  3 года назад +1

    I like the MKM Malaga (I like very much MKM knives in general).
    I hope a next version with a possibility to split the side with the knife and the side with the fork (easier when you want to eat and cut) :)

  • @inandouttv5365
    @inandouttv5365 2 года назад

    Nice video, thanks! No need for alternatives. SAK is the king

  • @lcg3816
    @lcg3816 3 года назад +3

    Victorinox’s finish is the best, if u’ve tried to use for real tasks, no other brands can compare to it especially all edges and corners are smoothed out, so u won’t get blisters or scratches

    • @FreedomFox1
      @FreedomFox1 3 года назад

      Very stain resistant as well.

    • @danielschmidtke9213
      @danielschmidtke9213 3 года назад

      @@FreedomFox1 I let my kids use my Huntsman saw for pumpkin carving the last 2-3 years and it cleans up easy and is fine. The Chinese knockoff Huntsman (box said Dong Fang 🤭), not so much. Same tool set and was claimed "stainless" but it's a rusty mess with cleaning and drying.

    • @FreedomFox1
      @FreedomFox1 3 года назад

      @@danielschmidtke9213 Check out victorinox’s new folding serrated paring knife. It’s sort of like a lightweight steak knife (good length, but bends), with a blunt tip and liner lock. But I bring it up because victorinox says it’s dishwasher safe!

    • @hanroschoeman8292
      @hanroschoeman8292 3 года назад

      Well I have carried Leatherman tools since I could pay for them myself and I have never complained about them then they came out with their free series there is no comparison between a Leatherman and a Victorinox
      Once you carry a leatherman most multitools just stop being usefull what I do love is the victorinox scissors they are the only thing that kept my victorinox in my pocket untill I pulled the scissor and added it to my Leatherman and I love it even more now

  • @DanDannyDanielleBob
    @DanDannyDanielleBob 3 года назад +1

    My dream multitool would look a lot like that gerber drive. I want 1/4" bits with some reach and good retention, center driving preferred. Solid scissors stronger than the minis on the style ps, an awl, a can opener, and a locking t-shank blade holder ala leatherman surge. That way you could ditch the blade and fly with it, swap different saw blades or file on demand. That plus knipex pliers wrench, a small pair of channel locks, some insulated needlenose and a utility knife would probably come in not much heavier than the surge. But since it doesn't exist i have a leatherman surge. Plus all the other tools anyway.

  • @bensheffer7210
    @bensheffer7210 3 года назад +2

    For me, it's hard to beat the Swiza 09. It has the locking main blade and the biggest pair of scissors on a multi-tool. The rubberized scales prevents slipping and cut-outs instead of nail nicks is a great improvement with ease of operation. Swiza has drawn me away from Victorinox for good and I have had those for decades.

  • @SuperMIKevin
    @SuperMIKevin Год назад

    Very nice video with a great collection, I had no idea swiza existed but now I do, thank you!

  • @HrWisch
    @HrWisch 3 года назад

    The Böker Tech Tools are made by Sanrenmu (China) and also available under their brand name aswell as under the Ruike brand name. The only difference is Böker using an older revision with smooth G10 handles and no tweezers while the Sanrenmu and Ruike branded knives are a newer revision with textured G10 handles and tweezers.

  • @vondahe
    @vondahe 2 года назад +1

    The locking blades are useful safety features but unfortunately makes them illegal in my country, carrying a MANDATORY minimum jail sentence of 8 days if the coppers find it on you. Totally insane.

  • @billlindsey411
    @billlindsey411 Год назад

    I recently added the two Spydercos to my collection. Good selection overall! Keep these coming, please.

  • @faizalkifli1844
    @faizalkifli1844 3 года назад

    Planning to get one of those SAK. I go for the Ranger/Huntsman.

  • @Ryan_the_tinz
    @Ryan_the_tinz 3 года назад +1

    I wasn't familiar with Swiza. I might have to try one. Usually I carry a Victorinox Rambler or Cadet, or Leatherman Squirt PS4.

  • @Brad_Jenkins
    @Brad_Jenkins Год назад

    I got a T4, love it

  • @Jackocunt420
    @Jackocunt420 3 года назад +2

    I love this dude always makes top tier knife content

  • @humester
    @humester 3 года назад +4

    I've had a Swiss Army Knife for 60 years and none of those come close for overall utility. The only thing it lacks is a pair of pliers for which I have my Leatherman.

    • @billh.1940
      @billh.1940 2 года назад

      I have mine for only 55 yrs. 😂. Leatherman for about 35 yrs.

    • @cromwellg60
      @cromwellg60 2 года назад

      The “handyman” and “tinker” both have pliers 👍🏻

  • @heidih2887
    @heidih2887 3 года назад +1

    I miss Wenger.. their saw blades included a nail groove to help open, PLUS the corner/edge above the groove provided added area to grip. The Victorinox have NO nail groove on the saw blade, even though every other implement on the knife does, plus the edge of the saw blade is shorter/more flush-fit . I can never open the saw of a Victorinox without either opening all the other items first, (and hoping I don't cut myself on them when opening the saw) or using some sort of plier tool, and even that is a struggle.

  • @mbhaus6349
    @mbhaus6349 3 года назад

    If mkm adds a toothpick I am sold 😂

  • @kz11377
    @kz11377 3 года назад

    Another suggestion would be the Boker Magnum Classic Steel Pocket Knife

  • @nateand3
    @nateand3 3 года назад +31

    I've never been a Swiss army knife freak, but I do appreciate them for what they are. But I'm obviously a Spyderco freak because soon as I saw a Spyderco i got stupid excited lol I was making my wife watch. Like she gives a crap lol

    • @globetrotter7778
      @globetrotter7778 Год назад +1

      Same here, Victorinox products aren’t the best for my personal needs but I can easily see how they would suit someone else’s. I carry a Leatherman Skeletool and I love its Spyderco-like thumb hole opening 👍

    • @nateand3
      @nateand3 Год назад +1

      @Globetrotter 777 yeah I've been thinking about trying out a Skeletool myself

    • @globetrotter7778
      @globetrotter7778 Год назад

      @@nateand3 it’s not for everyone, but if you’re interested in a folder that also has some extra functionality, I think it’s worth looking into. Maybe go to a store and handle one before buying 😉

  • @Crosscreekone
    @Crosscreekone 3 года назад +3

    MKM wasn’t the first to use premium steel in a “Swiss army” type knife, although they are the only current choice. Several years ago, G. Sakai made the “Fieldman Trekking” with a ZDP-189 main blade and, iirc, VG-10 tools. Excellent knives, if you can find them.

  • @stampydragon2739
    @stampydragon2739 3 года назад +1

    I’d love to see a episode on uk legal knives

  • @kirksmith347
    @kirksmith347 3 года назад +10

    The only thing that comes close is wenger and now they're part of victorinox

    • @faraway7696
      @faraway7696 3 года назад

      Swiza if you will is a followup of Wenger. Some Wenger people have founded Swiza. It is not an old brand as mentioned in the video though.

  • @beaurex4756
    @beaurex4756 3 года назад +2

    Great review, David. Happy Holidays to all y'all.

  • @03_austindrake88
    @03_austindrake88 3 года назад +1

    DCA always does such a great job with these videos. So well done and always very informative.

  • @willstevens4289
    @willstevens4289 3 года назад +1

    I’m open to correction, but I think that, surprisingly, several of the knives you show would be illegal here in the UK - simply because they have locking blades. It seems to be a weird law, but there it is.

  • @madmax13326
    @madmax13326 3 года назад +1

    No suprise Swiza knives have something in common with swiss army knives. Peter Hug, the CEO of the Victorinox Wenger division, left the Victorinox organization after they merged the Wenger and Victorinox Swiss Army Knife product lines, and joined Swiza.

  • @CadillacDriver
    @CadillacDriver 3 года назад

    The black Boker Tech Tool would compliment my black Hussar very nicely. In fact, they look like they could be designed / manufactured by the same company. Realising of course they are not.

  • @robsmithracing
    @robsmithracing 3 года назад +3

    I’ve got one made by Rogers of Sheffield, England. It’s been handed down to me from my late father. Sheffield steel is often regarded the best quality steel in the western world.

    • @baddoopey
      @baddoopey 3 года назад +1

      Alan Partridge, Knowing from lots of tool restoring is that Sheffield steel isn't a specific steel but just the name for steel produced/used in Sheffield. I've met great and absolutely crap Sheffield steel.

    • @robsmithracing
      @robsmithracing 3 года назад

      @@baddoopey this knife dates from the 50’s so I’m hoping it’s better than more modern stuff from that area.

    • @v.u8983
      @v.u8983 3 года назад

      Maybe in uk but doesn't TOP AMERICAN

    • @robsmithracing
      @robsmithracing 3 года назад +2

      @@v.u8983 Swiss beats both easily.

  • @railway-share3820
    @railway-share3820 3 года назад +1

    Excellent presentation.