I wish You would fix the Flag of Texas. Red touching Tennessee, and white touching Arizona. It's upside down, it's also aggravating to see Her dis-honored in such a Yankee slap to the face of our states dignity.
Sir, as a proud citizen of the State of Texas, let me say that these fine Yankee men have meant NO disrespect to the flag. In fact, several months ago they( the mill operators) accessed the official State of Texas website because of questions that were raised about displaying the flag. They have displayed the flag as listed on the website. Now if you are upset about the flag touching the other flags on either side then swallow your pride and carry on. Long Live the Republic of Texas!
You can't keep a man like Pete down for long, he's a man of steel!! Wow, that's quite the notch, can't wait to see what kind obstruction that was. Great prelude to Monday 's edition. "To be continued" as some say.
Looked at the old videos and found #331 starts with Chewy named and ends without Chewy named. I thought there would have been some sort of commemoration ceremony for such a useful tool.
Hi Mark. Now. I understand. The " metal" in the" longer log." That's why I ❤ watching you Mark in the sawyer's booth. I do " guess work" on Ed's video. Then more revealing & postive guess work on your video. Well. Say Hi to Ed, Pete, & ZZ. Have a good Sunday night the 18th. 🥰🙂😉😴👍❤️💜🙏🏻🙏🏻🙏🏻🙏🏻🪓🌲🌌
HI MARK 😊😊 yesterday I was cutting some chestnut oak wood and I myself hit 😮😮 some nails 💅 😮 it's no telling how long they had been in the wood U see the blue stain the pile went until I got that cut I cut around it what I could then there was a peace ✌ 😮 I could only cut half 🌗 😮 it of might get the rest of that peace ✌ 😮 W a maul when that peace goes in the wood stove the nails will come out then IVE seen some wood like that be 4 when wood is gone U shake the coals and the ashes and anthing else will fall in 2 the ash pan 😊😊 there is a stove shovel U use 2 take the ashes up then U put them in a bucket of water 💦 😊 OMG 8 17 2O24
👍👌👏 2) Something is sounding different. A slight rattle respectively tinny sounding vibration. Everything okay with the mill? Thanks a lot for making teaching explaining recording editing uploading and sharing. Best regards luck and especially health to all of you.
@@markgalicic7788 You're welcome, it's my pleasure. Thanks for replying, I appreciate that. 2) That's great to hear. At last something without problems! 😁 ;-) Sincerely yours.
Beautiful wood. Too bad it had a chunk of metal in it. Many years ago when districts still had shop classes I had a student plane a 5/4 oak board. It "chincked" in the planer and she was really surprised to see 1/2 of a bullet in the board. A good teaching moment for a city kid.
Half past six in the morning definitely not a good day when you find metal in your log , remember as an apprentice sawyers hitting metal they had a fare collection of bullets and shrapnel from the war , they did have an old war time mine detector but it didn’t find it all and it was the apprentices job to burst the logs open with wedges to find out what it was all good fun being young and daft, anyway you guys have a nice day
@@rcknross it worked out good for me and I got a pretty good yield out of this log , you can saw this log many different ways or just cut it up for firewood
In the 1960s a wood yard near me was sawing a massive centuries old oak tree and in the middle they hit a huge blacksmith made horseshoe off a shire horse, you should have seen the damage to the blade, horrendous !!
![Diggy Graves - Red Vineyard [Official Lyric Video]](http://i.ytimg.com/vi/8Ro085T0mnQ/mqdefault.jpg)
I wish You would fix the Flag of Texas. Red touching Tennessee, and white touching Arizona. It's upside down, it's also aggravating to see Her dis-honored in such a Yankee slap to the face of our states dignity.
Take your bad self up there and fix it!
Doug you are wrong!
Don't watch. And stop crying
Really? Are you serious?
Sir, as a proud citizen of the State of Texas, let me say that these fine Yankee men have meant NO disrespect to the flag. In fact, several months ago they( the mill operators) accessed the official State of Texas website because of questions that were raised about displaying the flag. They have displayed the flag as listed on the website. Now if you are upset about the flag touching the other flags on either side then swallow your pride and carry on. Long Live the Republic of Texas!
Glad to see 319 back on the scene! 👍👍
yes for sure.
Thanks to the crew for another interesting video. Good to see Nuts319 working again.
thanks Jerry.
You can't keep a man like Pete down for long, he's a man of steel!! Wow, that's quite the notch, can't wait to see what kind obstruction that was. Great prelude to Monday 's edition. "To be continued" as some say.
yes Pete is very strong , we did find a finish nail in this log.
@@markgalicic7788 Yes, I thought you were going to save it for Monday. That's ok, curiosity was getting to me. Thanks!!
There was certainly some determination in getting that chunk of metal out of that log. I wouldn't think a spruce log would be worth the effort.
yes it was but why throw out a good chunk of white spruce.
Yum, thanks. I’m satisfied. Great snack.
thank you.
Thanks Mark and crew Enjoyed
thanks Bobby.
Nice to see Pete and and around
thanks Sharol it sure is.
Lovely video.
thanks Kevin.
Thanks for the video. I hope the BMG has a blessed week ahead.
thanks Robert.
Hello Mark, and Mr. Eddie
Thank you for sharing your videos and you time with us. I look forward to each and every video.
thanks Mckinley.
@markgalicic7788 Mark, you and Mr Eddie are good examples of what it takes to be great folks. You all share a lot of experience, and wisdom with us.
Mark, method to your "madness" indeed 😎😎💯💯!
thanks Greg.
Good job men.😊
thanks Ronald.
Nice to see Pete back at the mill again and to see everything working and sounding good. Pete don't know what the word quit means.😊😊😊
Happy Sunday Eve!😊🪚🍪👍👍👍👍✌️
thanks Mel.
Great yield Mark good to see pete back and doing some on his channel
hi there looks like a right good size piece of steel . good sawing around it , john
thanks John , just a small finish nail lol.
Good video Bus Motor Productions
thanks James.
Thanks for another excellent video Guys and real good to see Pete back too.
thanks Dave.
Thanks guys! Your videos always make my day.
WOW mark you had to cut a lot out to find the metal you did a awesome job recovering what was left👍👍👍
thanks CJ.
That’s what we call at work “making chicken salad out of chicken shit!”
Great work Mark and crew!
thanks Gary.
Wow excellent handling of that log guys. Great save and an awesome video. I really enjoyed this one! 😀
thank you.
Little piece of metal, big chunk cut out. ❤❤❤❤
yes but we got some nice lumber out of it , Pete also found a big nail in a nice white pine log .
Great video saving a very nice log that yielded a lot of good lumber.
thanks Dave.
Breakfast of champions. Thanks
your welcome Patrick.
Nice looking spruce log even with the hole from nuts319 still yielded a lot of good lumber
Thanks Marc , it was a nice butt log .
@@markgalicic7788 it sure was a nice butt log. We are going to be getting into some spruce. After white pine and red pine
Looked at the old videos and found #331 starts with Chewy named and ends without Chewy named. I thought there would have been some sort of commemoration ceremony for such a useful tool.
Nice save on that log. Mark. I've been watching Pete since he came back.
Bill
thanks Bill
U are the man Mark waste not want not Good job👍👍👍👍
thanks David.
Thank god for metal detectors!
yes for sure.
good log . thanks . pete . nice see pete.
Nice job saving that log.
thanks Thomas.
Great work guys!
thank you.
Awesome little video guys. Make the lumber that ya can.
thanks Gary.
I had to do that a few weeks back. It was a nice log, too, 24-foot. Ended up being a bullet someone shot probably 75 years ago. Nice video
Hi Mark. Now. I understand. The " metal" in the" longer log." That's why I ❤ watching you Mark in the sawyer's booth. I do " guess work" on Ed's video. Then more revealing & postive guess work on your video. Well. Say Hi to Ed, Pete, & ZZ. Have a good Sunday night the 18th. 🥰🙂😉😴👍❤️💜🙏🏻🙏🏻🙏🏻🙏🏻🪓🌲🌌
It’s amazing what a good sawyer can do if he wants to.👍
yes go to plan B lol.
Wicked awesome salvage job.
HI MARK 😊😊 yesterday I was cutting some chestnut oak wood and I myself hit 😮😮 some nails 💅 😮 it's no telling how long they had been in the wood U see the blue stain the pile went until I got that cut I cut around it what I could then there was a peace ✌ 😮 I could only cut half 🌗 😮 it of might get the rest of that peace ✌ 😮 W a maul when that peace goes in the wood stove the nails will come out then IVE seen some wood like that be 4 when wood is gone U shake the coals and the ashes and anthing else will fall in 2 the ash pan 😊😊 there is a stove shovel U use 2 take the ashes up then U put them in a bucket of water 💦 😊 OMG 8 17 2O24
we try not to hit metal so this worked out great.
Nice work have a great day
thanks James.
ty guys great sawing ty
thanks Richard.
Bad boy bad boy what you gonna do when Mark saws you 😅
I like it lol!
Got some really nice lumber after all 👍👍
To your comment about watching old videos to help the channel I have 20 of them that I watch at least twice a week and yes they are all stop signs
thank you for watching our videos!
Sawyer you are .🇺🇲🇺🇲
Mark what is the hardest wood you have cut on your mill? Iron wood?
The shorts are great for wood working craft
we got a few nice short clear boards.
We don’t like metal, only heavy metal 🤘
I like it lol!
GREETINGS AND BLESSINGS 🙏
thanks Gerardo.
@@markgalicic7788
GOD BLESS YOU ALL 🙏👍💪♥️
HAPPY SUNDAY
I see the other guys hanging out. Nice log. Pitty about the metal. God BlessYall
thanks Lewie , we had a big crew today.
@@markgalicic7788 Sure did. Remain, calm, Markus!
That log was best suited to be a canoe
good one lol!
👍👌👏 2) Something is sounding different. A slight rattle respectively tinny sounding vibration. Everything okay with the mill?
Thanks a lot for making teaching explaining recording editing uploading and sharing.
Best regards luck and especially health to all of you.
thank you , the mill is running great no problems.
@@markgalicic7788
You're welcome, it's my pleasure. Thanks for replying, I appreciate that. 2) That's great to hear. At last something without problems! 😁 ;-)
Sincerely yours.
Gosh if I was up on making videos my metal ridden log video may have beat yours to publishing 😂❤
you do find lots of metal with your saw lol , hope all's good say hi to David!
Beautiful wood. Too bad it had a chunk of metal in it. Many years ago when districts still had shop classes I had a student plane a 5/4 oak board. It "chincked" in the planer and she was really surprised to see 1/2 of a bullet in the board. A good teaching moment for a city kid.
yes but we did get some nice boards out of it.
THAT was a beautiful log. Too bad about the metal.
yes it was but at least we got some nice boards out of it.
Half past six in the morning definitely not a good day when you find metal in your log , remember as an apprentice sawyers hitting metal they had a fare collection of bullets and shrapnel from the war , they did have an old war time mine detector but it didn’t find it all and it was the apprentices job to burst the logs open with wedges to find out what it was all good fun being young and daft, anyway you guys have a nice day
thanks Alex.
Where's that 'Willow The Wisp' ZZ? Cloud Factory again, as in the White Cloud toilet paper factory?
yes he was lol.
Who chewed the chunk out of the log Bevers perhaps?
good one Gary lol!
I need more new videos.😊
more on the way Michael.
Hi Mark why did you cut your 2 x 8 to 7 1/2 inch wide.
First time I have been able to see the laser
see it is real lol.
Hahaha😂 ,that looks like the hulk took a bite out off it, dont you guys have crowbars or other tools, that was cool to watch though
655God
yes, they can as long they help their neighbors
Yup. When you're on the taper you're going to gain some, and lose some. Like a wise man once told me many years ago it's a win-win loose loose. 😆🤷
very true , lol!
could have had better yield if the bottow of that notch was better lined up to be parallel to the saw?
true but I wanted it to say attached to the boards coming off no small pieces flying.
@@markgalicic7788 okay, but you still had several disconnected short boards coming off.
@@rcknross it worked out good for me and I got a pretty good yield out of this log , you can saw this log many different ways or just cut it up for firewood
In the 1960s a wood yard near me was sawing a massive centuries old oak tree and in the middle they hit a huge blacksmith made horseshoe off a shire horse, you should have seen the damage to the blade, horrendous !!
that's a bad day for sure.
👍🧐 Romania.❤😂
thanks Liviu!
✔️😉
thanks Sharon.
There ain't no waste because you are gonna use the cut off's for other things.
💥💥🍕🍻🐿️
thanks.
😛😛😛😛😛😛😛❤❤❤❤❤👍👍👍👍👍👍👍👍
thanks Charles.
Mark, you already wasted the log
no we got lots of good lumber out of this log Andrei.
...........................