You’ve gotta admire this bloke as a business owner and a salesman. For someone who’s obviously never been a hands on worker in the marine industry he’s probably the top ‘dad’ style operator of trailer boats. I bet his employees in the workshop would be the real experts, and he often points out their good work. Which does seem a bit better than most dealer fit outs.
Best boat review, hands down on youtube. Brutally honest, awesome on water testing in the weather conditions everyone wants to see a test performed in and with the commentary and video footage synced and filmed with the drone was top shelf.. Boat comparison and walk through at the beggining was spot on and covered everything including the trailer quick releases as well!!!........might need to learn how to read a tape measure though lol. Wish all these other muppets could perform as full a review as this, These sorts of reviews encourage boat builders to make improvements and push the industry forward....Shit hot! .....Can you do one on the 645 Extreme with a 150 Yamaha.....If you dont sell them, I reckon you should cause Im sure you'd sell plenty. Cheers from NZ.
I think this bloke used to sell for Ktel in a previous life! Entertaining and can't get over how fast that drone is, impressive. Video not kind to the Barcrusher. Nice video
Entertaining review, liked the footy style running commentary. Though in that fairly mild looking sea neither bout sounded comfortable at more than moderate speed. Would be brutal in whitsunday chop.
I'd like to be on both boats and make my own judgement. This guy could sell Ice to the Eskimos..! He is a QLD dealer and the Barcrushers are made in Victoria so you don't have to be Einstein to figure out what he's up to LOL.
The guy doing the review is a little crazy but what an awesome review , I can honestly say I’ve never riden in a comfortable aluminum boat ever and man did they look uncomfortable , pretty hard to tow a big glass boat up the beach but
Regularly watch bc's leave tridents for dead on way to shelf and back. In more comfort....tridents, stacers, formosas cop a hiding and have to slow right down. trident a good beginner boat.
Loved this, well done guys. Very entertaining but more importantly this type of no frills, honest review is very rare and much needed in the Australian boating world. Hope you do more of this type of video.
Hi, Mate. Good job. so if the floor is already under water, what will happen if the boat is flipped upside down? sink?, its weight already more than reserve flotation?
Been out in a mates 615BC awesome rid 2m swell bit of joggle, sat well in 3kn drift with 10 to 15kmh wind sat on 26kn with auto pilot on all the way from the shelf and the only thing I'd pick on is the noise when the keel cuts i found it a bit loud but felt safe and stable which outweighs a bit of noise, had a 150 Yammy and it paired great.
I'd like to see a comparison between yellowfin 7600 & stabi 2400 supercab cuz they both are but like a tank, handle the roughest conditions with ease but dunno which is better overall.
Brisbane yamaha is a dealership! I’m a boat dealer! Plate boat means what? Is a barcrusher, Formosa, seajay , AMM , yellowfin, extream, Stabicraft , etc plate boats? Some people feel flat sheets or 5083 high tensile alloy? Or the construction method is what makes a boat a plate boat What I’m saying is trident rides better than most plate boats, is as strong as all and is built out of alloy stronger than 5083 Most of the brands above Aren’t Tridents should cost way more if price was ride and quality Come for a test
22:46 is horrendous for the barcrusher too. It's not even a particularly rough sea. The hull should extend to the end of the transom like the trident. Otherwise you lack buoyancy at the rear and it digs in like so.
When I trade or buy an equivalent BC They sold recently to some foreign company so who knows 709 and 760 yellowfin are really good boats I’ve got them I. Stock come for a water test
You messed some of your measurements mate you measured cockpit space on the trident near the transom door instead of the transom area near the bait board. So it’s less than 1.5 by a lot.
All boats are a compromise. If the builders of similiar purposed boats got together and combined each of their best boat design features, an incredible boat would be produced.
Duncan Coutts barcrusher stole surtees aswell as some quintrix in early 2000s all added different parts of there boat so surtees is all the boats combined
You'd think the bar would be more stable, the whole boat is designed around being a deep v and still stable, doesn't seem to handle the waves that good anyway I would have to be in one to know for sure. But the bar has much better build quality
wonderplatypus tv for sure I do. I’ve had two plate boats and two glass, there are pros and cons for each but right now at my age I’ll take the ride comfort afforded by my SL26 over any Aluminium boat on the market.
Cammo 1308 oh yeah mate understandable sorry if I came over as rude barcrushers are made for pure fishing deep water and rough weather doesent suit everyone enjoy 👍
wonderplatypus tv I’m not offended mate, I’m happy with my boat choice. Perhaps you should stay living in your little fantasy land and keep playing your kiddies TV games . When you grow into your big boy pants and buy your own boat you will understand what ride comfort is all about.
Set up to sell his boats sounds like he could sell ice to an eskimo had both barcrusher much more comfortable yep glass smoother but each for their own choice aluminium or fibro depends how much cash flo u got i like the stabi craft 2750 well off to work i go
Glad your not a builder those measurements were all over the place, entertaining as usual, not a fan of barcrusher the rear is way too vulnerable too waves over back 50km out and relying on a 12v bilge pump no thanks, the ride sacrifices safety
I’ve owned barcrusher myself i took trident as camera boat and then turn vid into comparison because trident was so good Trident 610 is a fantastic boat and if you campsite price it’s a bargain
you have got to be joking right !!!!! Ali boats slap bang pound and the Noise ...... why people say they ride good and pay money for these i don't know, give me a Glass boat anyday
very calm ocean, most boats perform well in these seas, very noisy for an ally boat, both of them, I would not like to take either boat 60kms north of Kalbarri
It works really well for me.. Not sure about legalities and all that but filling it up is super easy. Don't need to worry about air locks and it's too easy to have a quick of actual fuel level.
I really like 610 tridents The 610 Territory legend has the same Hull and I think it’s the best open centre consoles made the tridents not far behind upto 6.5m boats it’s hard to beat and at the price it’s well worth looking at
This guy here very entertaining need you on tv screens here in the states . Love the way the emotions roll and voice changes .
This has put me off buying a barcrusher thanks for the information.
This bloke is gold! Pretty sure he's had 8 full strength beers before the review. 😁😁
Plus few lines of goie
sinkin piss. reviewing the boat and doesnt know how it works
Yeah check out his review of the Baysport 585. It's classic!
i know Im kind of randomly asking but does anyone know a good website to watch newly released series online?
@Karson Ronnie I dunno I use Flixportal. You can find it if you google =) -zayn
Aaron mate great review, not just telling the us the top line crap without the comparison and practical uses for everything.
Moment of appreciation for the drone pilot especially at 16:57, top notch skills!!
Do us all a favour and do a boating reveiw / fishing show on tv. Wed love to see it Aaron..
Hahahhaa this bloke is gold. Brisbane rep, if I had enough money for one of these I'd go buy one from him
You’ve gotta admire this bloke as a business owner and a salesman. For someone who’s obviously never been a hands on worker in the marine industry he’s probably the top ‘dad’ style operator of trailer boats.
I bet his employees in the workshop would be the real experts, and he often points out their good work. Which does seem a bit better than most dealer fit outs.
Best boat review, hands down on youtube. Brutally honest, awesome on water testing in the weather conditions everyone wants to see a test performed in and with the commentary and video footage synced and filmed with the drone was top shelf.. Boat comparison and walk through at the beggining was spot on and covered everything including the trailer quick releases as well!!!........might need to learn how to read a tape measure though lol. Wish all these other muppets could perform as full a review as this, These sorts of reviews encourage boat builders to make improvements and push the industry forward....Shit hot! .....Can you do one on the 645 Extreme with a 150 Yamaha.....If you dont sell them, I reckon you should cause Im sure you'd sell plenty. Cheers from NZ.
Would have to agree. Other reviews are a complete joke.
Fkin’ intense review. I’d love to watch a Collingwood game with this bloke.
I think this bloke used to sell for Ktel in a previous life! Entertaining and can't get over how fast that drone is, impressive. Video not kind to the Barcrusher. Nice video
Entertaining review, liked the footy style running commentary.
Though in that fairly mild looking sea neither bout sounded comfortable at more than moderate speed.
Would be brutal in whitsunday chop.
What would u recommend for Whitsubday waters mate? I'm looking to move there soon, from Gold Coast, cheers
The biggest boat you can afford to run and tow. Fibreglass or heavy plate to cut through the chop or a Cat.
This bloke loves his job too much, solid video cheers
I'd like to be on both boats and make my own judgement. This guy could sell Ice to the Eskimos..! He is a QLD dealer and the Barcrushers are made in Victoria so you don't have to be Einstein to figure out what he's up to LOL.
What a fkn review. Genuinely my favourite comparo ive ever seen, from cars/bikes/boats. Thats how its done
Great video.. I have a 615c
Good review. I’d say you knocked a few schooners down before doing this video. But good all the same. I’d come up to Brisbane to buy a boat off you
The guy doing the review is a little crazy but what an awesome review , I can honestly say I’ve never riden in a comfortable aluminum boat ever and man did they look uncomfortable , pretty hard to tow a big glass boat up the beach but
Surprising isn’t it. Micheal come hear. 😂. This bloke is gold!
good video, you guys are having too much fun
Regularly watch bc's leave tridents for dead on way to shelf and back. In more comfort....tridents, stacers, formosas cop a hiding and have to slow right down. trident a good beginner boat.
Loved this, well done guys. Very entertaining but more importantly this type of no frills, honest review is very rare and much needed in the Australian boating world. Hope you do more of this type of video.
Hi, Mate. Good job. so if the floor is already under water, what will happen if the boat is flipped upside down? sink?, its weight already more than reserve flotation?
My god, guy gives me flash backs of my dad yelling at me when I was kid for not holding the flashlight in the right spot
I like your dad
I was pissing myself listening to your measurements at the start! 🤣🤣🤣
Judging by this blokes tape measure skills, he tells his misses his 150mm when he's 100mm.
He knows boats as much as he knows donuts.
What do you want to know about doughnuts?
Should have taken the dumb end and gave the tape measure to the young fella
Been out in a mates 615BC awesome rid 2m swell bit of joggle, sat well in 3kn drift with 10 to 15kmh wind sat on 26kn with auto pilot on all the way from the shelf and the only thing I'd pick on is the noise when the keel cuts i found it a bit loud but felt safe and stable which outweighs a bit of noise, had a 150 Yammy and it paired great.
How good are yamaha 150s
@@BrisbaneYamaha they just chug along no stress, buy me one😁🤣🤣
Great review, Bar Crusher stole the design from Surtees a NZ boat
The ride is never great in a plate boat, it’s a Cat for me every time
Did you have a mic taped to the deck of the bar crusher to make the Bang louder? but nothing from the quintrex? Seems strange.
Uncle Chop Chop the boat seller. Gold
Awesome, honest a rare & real review top job.👍👍👍
I really like the 610 trident
I'm gonna buy my boat off this guy hes amazing
Funniest boat review video I've seen so far. Good vid.
Checkout the Baysport 585 one. It's gold!
You’ve got your navigation lights on
Both would still be outdone by a 5m Glass boat
Great vid bud, normally when you back up on fish you trip the motor up, that crusher actually looked better then some
Good comparison 👍
I'd like to see a comparison between yellowfin 7600 & stabi 2400 supercab cuz they both are but like a tank, handle the roughest conditions with ease but dunno which is better overall.
Support NZ or Australian yellowfins built in qld
Never heard of a Quintrex being called an exceptional plate boat before. Does this bloke sell them ? ...
Brisbane yamaha is a dealership! I’m a boat dealer!
Plate boat means what?
Is a barcrusher, Formosa, seajay , AMM , yellowfin, extream, Stabicraft , etc plate boats?
Some people feel flat sheets or 5083 high tensile alloy? Or the construction method is what makes a boat a plate boat
What I’m saying is trident rides better than most plate boats, is as strong as all and is built out of alloy stronger than 5083
Most of the brands above Aren’t
Tridents should cost way more if price was ride and quality
Come for a test
Great job, but my double skin Huntsman fibreglass rides through rough waves like a dream.
Like huntsman
Try a stabicraft or even an extreme game king
Extreme would be the option .... expensive though
Awesome review. I love this bloke.
I like the barcrusher
22:46 is horrendous for the barcrusher too. It's not even a particularly rough sea. The hull should extend to the end of the transom like the trident. Otherwise you lack buoyancy at the rear and it digs in like so.
It’s because this model didn’t have the bar tab on the rear. Testing it without that is just stupid
The swell looked worse during the barcrusher testing
This guy is off his chops 🤣😂i like it because i normally watch this shit when I've had a few haha
Or watch with sound turned off
That’s what I do
Hey mate can you do a Bar Crusher v YF 7000 HT Southerner compassion ?
When I trade or buy an equivalent BC
They sold recently to some foreign company so who knows
709 and 760 yellowfin are really good boats I’ve got them I. Stock come for a water test
You guys should do a 570 renegade review
You messed some of your measurements mate you measured cockpit space on the trident near the transom door instead of the transom area near the bait board. So it’s less than 1.5 by a lot.
Nah he doesn't the kid moves the tape away from the transom door and lines it up.
Do a stabicraft 1850 supercab vs
Watch this with subtitles , its bloody funny.
In reverse mate, try it with the bar tab on the rear and not have it tested with the rear open 👍🏼
So close the hull on barcrusher wow that would make difference well done I never thought of that
Wy do you do youtub
All boats are a compromise. If the builders of similiar purposed boats got together and combined each of their best boat design features, an incredible boat would be produced.
Duncan Coutts yeah mate that’s surtees
Duncan Coutts barcrusher stole surtees aswell as some quintrix in early 2000s all added different parts of there boat so surtees is all the boats combined
@@wonderplatypusgetthedog8634 surtees and barcrusher same shit
You'd think the bar would be more stable, the whole boat is designed around being a deep v and still stable, doesn't seem to handle the waves that good anyway I would have to be in one to know for sure. But the bar has much better build quality
Do Barcrushers come with complimentary hearing protection? That hull slapping sounded loud as f@ck and my back was aching watching it🤣🤣
Antonio deCarmoducci stick to your paddle board and double your Xanax dose mate 🤣🤣🍺🍺
Cammo 1308 buddy you fish out of a fibre glass boat keep dreaming
wonderplatypus tv for sure I do. I’ve had two plate boats and two glass, there are pros and cons for each but right now at my age I’ll take the ride comfort afforded by my SL26 over any Aluminium boat on the market.
Cammo 1308 oh yeah mate understandable sorry if I came over as rude barcrushers are made for pure fishing deep water and rough weather doesent suit everyone enjoy 👍
wonderplatypus tv I’m not offended mate, I’m happy with my boat choice. Perhaps you should stay living in your little fantasy land and keep playing your kiddies TV games . When you grow into your big boy pants and buy your own boat you will understand what ride comfort is all about.
Set up to sell his boats sounds like he could sell ice to an eskimo had both barcrusher much more comfortable yep glass smoother but each for their own choice aluminium or fibro depends how much cash flo u got i like the stabi craft 2750 well off to work i go
Great review !!
Filmed with a helicopter ??? 😱
Ron Cooke ... the aerial shots are _probably_ done with a DJI phantom 4 Pro drone...
Are YF just bigger version of Trident
No Yellowfin are hand built using 5083 plate alloy 6mm bottom sheets built very tuff
And result of ten years R&D
@@BrisbaneYamaha ty
Beautiful as usual 👍 you’re not going to let some young 😱 beat you? 🤣
He said Punk, just to clarify!
Need someone who knows how to read a tape
Do all Barcrushers have to be fueled like that? seems impractical/dangerous!
It's actually really good, you can see straight in to the tank and measure your fuel easily.
no fuel hoses and fixtures to break or perish, no extra drill holes etc. It's a great design!
Glad your not a builder those measurements were all over the place, entertaining as usual, not a fan of barcrusher the rear is way too vulnerable too waves over back 50km out and relying on a 12v bilge pump no thanks, the ride sacrifices safety
He could easily just say he doesn't like Bar Crushers and this review would be done in 10 seconds
I’ve owned barcrusher myself i took trident as camera boat and then turn vid into comparison because trident was so good
Trident 610 is a fantastic boat and if you campsite price it’s a bargain
What about stacer
you have got to be joking right !!!!! Ali boats slap bang pound and the Noise ...... why people say they ride good and pay money for these i don't know, give me a Glass boat anyday
Bob F sounds to me you should just stay in the air condition
10:40 hahhahahha u know he aint lying
Why do sales people always look dodgy. 🤷♂️🤣
Adjust the trim and depth of screw
I'll keep my haines
ill keep my 1 metre kayak
Saw a bar crusher get crushed by Noosa bar probably pilot error
very calm ocean, most boats perform well in these seas, very noisy for an ally boat, both of them, I would not like to take either boat 60kms north of Kalbarri
That fuel filler location is horrendous in the barcrusher. No idea what they were thinking.
They weren't thinking, thats the problem.
Save cost, more profits!
@@maxszhao ballast on BC is useless, I would prefer to weld it up. A dynamic ballast allowing the water to be locked in or out is the go.
It works really well for me.. Not sure about legalities and all that but filling it up is super easy. Don't need to worry about air locks and it's too easy to have a quick of actual fuel level.
Bob Builder mate that’s what they already do
You don’t even have clears on the bar crusher come on
The transom door on the B.C. is just plain stupidity.
20:20 lol it would be like a sore loser if he lost 😂 are you flat out
After watching this I wouldn't buy a Bar Crusher
I really like 610 tridents
The 610 Territory legend has the same Hull and I think it’s the best open centre consoles made the tridents not far behind upto 6.5m boats it’s hard to beat and at the price it’s well worth looking at
Hi
It would want to be good for 70k😳
Ozzie Jim 780htp enclosed cabin barcrusher goes for 150-200k depending on upgrades
Brilliant
Best job ever!
9:38 almost took it to far
He said having a Kip
Someone show this bloke how to read a tape measure 😂😂 good dude though.
Bloody useless I know
Honestly the trident makes the bar crusher look like shit.
this bloke sounds funny, farken funny !!
Blokes lost the plot
Massive qld bias
I’m
Both would be slain by my Seacat 565
Joj
lol
farken funny bloke!
Eateyeuf
M0[[jicartoon
stabicraft all day every day...
What's this standing up crap?if the helm was set up right you'd be sitting instead of risking injury or losing control
Nice work though lads.