Bro I know I keep saying it but your videos are getting so good! The editing is freaking great. I especially enjoyed the love scene knocking out the axle bearings 😂 Your a funny dude! ❤❤❤❤
I'm glad you never got a job with Saturday night live . You would still be there and we your subscribers would be SOL. Thanks brother. From northern AZ. Merry Christmas to you and yours.
for future reference you can account for you wedge also so there is less of a stack up and shit to worry about. 10 degrees plus the 4 degree shim (if i remember right) equals 14 degrees total
Gonna love how it hooks with that mini spool but gonna hate driving it daily with it too. Gonna eat tire like crazy. Had one in my 350 swapped s10 blazer.
Make sure you use your original fill hole to have the accurate amount of gear fluid, because that fill hole on the aluminum cover looks pretty low. If you didn't think about that!
I love how you said lower the standards again in this video brother ! Keep up the good work and letting them bitch haters hate makes you even more locc’d up ! Love from the Bay Area Cali!
15:38 Diff project came along great. I'm shocked when you welded the spring perches on you didn't account for the pinion angle you're aiming for. Ideally you could have welded the perches with the pinion shim angle included and then you would have eliminated the pinion shims.
Pretty sweet man! Hey Bravus let me know about that locker. I am curious if it chirps when turning corner like a welded diff. Considering one on my Dodge Van.
Happy to see you step out of your comfort zone. I was shocked you didn't add the wedge angle into where the spring mounts, too, or did I miss something? Also, did you look into balancing your driveshaft?
spray can talk took me back to a time long ago when this old bastard would repaint his bicycle every other weekend so my Pap Pap would replenish his supply of spray paint colors then i would show up Friday night to stay the weekend and Saturday morning right after breakfast i would run for the garage and tear down my 20 inch pedal bike and i would travel into my dreamland of color swap soon as i sat the can down i would carefully put the bike together and ride through the neighborhood until the 15 coats of paint dried then soon enough Friday night would be right around the corner
Glad it got to you bro thanks for the love
Ecto 1 build is gonna be pretty cool I subscribed I'm gonna check out your stuff this evening after work keep up the good Jon my friend
@@Darkwahya420thanks for the support brother
“Mike Hawk” 😂
Bro use the drums off the blazer as your template to redrill the axles
Bro I know I keep saying it but your videos are getting so good! The editing is freaking great. I especially enjoyed the love scene knocking out the axle bearings 😂 Your a funny dude! ❤❤❤❤
There is a bracket you can get to put on your 88 rear in E brake where your GM brake cable will work. I’ll look for the website.
That diff cover mod is so sick
I'm glad you never got a job with Saturday night live . You would still be there and we your subscribers would be SOL. Thanks brother. From northern AZ. Merry Christmas to you and yours.
Came here from FB, can’t wait to watch more. I subbed (small automotive RUclipsr here). I have started to modify a 1998 GMC Sonoma, and I love it.
That's super cool that those 3 dogs all eat out of the same bowl st the same time with no problems.
Most underrated channel 🙌
victors garage handwriting says navy petty officer of the watch all over it
for future reference you can account for you wedge also so there is less of a stack up and shit to worry about. 10 degrees plus the 4 degree shim (if i remember right) equals 14 degrees total
Love the rain and that tan and white Pit Terrior ❤❤ That alloy cover turned out super nice....PS. I am totally BROKE
What's up with the zink coating set up you started?. 🤔. Great video as always brother.
Bravus and choppertime josh be sounding like seperated twins sometimes.
the blazer needs some caltracs trailing arms. still one of my fav builds on yt atm keep it up my brother
Proud to see another 1st gen saved man. Your vids are legit but wouldn’t be as good without your humor and personality. Double Win. Keep it up
Gonna love how it hooks with that mini spool but gonna hate driving it daily with it too. Gonna eat tire like crazy. Had one in my 350 swapped s10 blazer.
Let's go DB FAM 💪💪💪
Cover came out sick dude !
Happy holidays everyone
Hell freaking yeah dude 💯🤙🏼
Hell yeah brother. Love the build and everything about it. #DBFAM
Happy Merry Christmas, late, but my son just got that Lego set too
Get wheel adapters, that adapt that to what you need
Basically spacers
Hope that helps ur real cool ppl
Make sure you use your original fill hole to have the accurate amount of gear fluid, because that fill hole on the aluminum cover looks pretty low. If you didn't think about that!
Next time fyi old school trick bolt chain lol turn bolt sideways behind bearing and pull chain with bolt with slide or hammer
You got some awsome tools
I love how you said lower the standards again in this video brother ! Keep up the good work and letting them bitch haters hate makes you even more locc’d up ! Love from the Bay Area Cali!
15:38 Diff project came along great. I'm shocked when you welded the spring perches on you didn't account for the pinion angle you're aiming for. Ideally you could have welded the perches with the pinion shim angle included and then you would have eliminated the pinion shims.
Fuck yeah bro loving the progress get it!
The bearing removing part😭😂😂🤣🤣🤟🤟
i have been trying to tell guys on you tube to sand blast their aluminum intakes or any small aluminum parts that are not new and you already know
Pretty sweet man! Hey Bravus let me know about that locker. I am curious if it chirps when turning corner like a welded diff. Considering one on my Dodge Van.
Happy to see you step out of your comfort zone. I was shocked you didn't add the wedge angle into where the spring mounts, too, or did I miss something? Also, did you look into balancing your driveshaft?
#dbfam strong boi 💪
more dog content its cool bro seeimg the love you have for your dogs
Go to Google look up Ford 88 swap E brake adapter
Ooo a mini!!❤
Bro you crack me up
So funny. Well played
Where did you get those new axle perches that your going to weld on brotha and are they for an s10?
Next quote on the shirt!! "You don't like it, lower your standards".
I thought he was going to use those ears on the diff cover for a swaybar
You forgot to add in the degrees for the shim so you don't need to use it.
You do know u get rid of all of that when u run c clip eliminator rite
spray can talk took me back to a time long ago when this old bastard would repaint his bicycle every other weekend so my Pap Pap would replenish his supply of spray paint colors then i would show up Friday night to stay the weekend and Saturday morning right after breakfast i would run for the garage and tear down my 20 inch pedal bike and i would travel into my dreamland of color swap soon as i sat the can down i would carefully put the bike together and ride through the neighborhood until the 15 coats of paint dried then soon enough Friday night would be right around the corner
Guy math is saving $40 on paint then spending it on a box fan and filters. Exactly what I would do also lol
Bruh, axle on level surface, angle the yoke to the degree you need and weld the perches level to the ground... simple
Limited slip diff!!!
Bro this shit is too funny LMFAO
Yee
Fcking Halarous Vlog, bro fck all haters Merry Christmas
4:41
Ahhahaha the vocie
Sad part is I sent you something from Amazon in November still waiting for the email that it shipped to you 👿
artist spray paint is literally half the price of hardware store spray paint wtf
First.
Wear a mask with all that aluminum youre throwing in the air
Why are you keep setting, repeat movies, where is the new words?
Oof
The rear-end cover mod turned out great, heck yeah spoolin it up for a posi diff 🤌