BMW E70 X5 - Center Console Trim Removal & Installation (2 of 2)
HTML-код
- Опубликовано: 24 авг 2024
- This is a short video showing how to easily install both trim pieces of the E70 X5 center console. The cup holder surrounding trim is by far the most difficult piece to install without the proper technique. I'll explain the issue many run into along with the technique I use to quickly install this trim piece with no special tools.
Thank you so much I was struggling to get it in especially because I have the knee pads on my console . I watched your video and got it on in less than 10 secs lol. 2022 and still helping people. . Thanks again
It helps a lots. I struggled for more than half hour and could not put the front trim back. After watching your tips, it worked like magic. Thank you, you are a legend.
You're a legend. Spend 30 minutes dickin around before turning to RUclips and your video - this worked first time. Legend
Great tip! Been fighting with that trim piece for about a half hour now. Got it first try with this trick!
I legit tried for an hour, found this video and it popped in like butter 1st try, hats off to you & RUclips 😂❤
I've met some heroes on the Internet in my time, but I think you might be the greatest of them all. I knew something was catching but the credit card idea is genius!
Thank you so much. I fought getting that cup holder trip for 45 min til I watched your video!
Extremely helpful with my BMW X5 E70 2009 interior refurbishment. I struggled for about 10 mins, then remembered seeing this video. This method worked perfect and was key to getting this replacement part installed. Thanks.
Thanks so much for showing how to slide the the cup holder piece in. You a life saver.
Thank you sir! The trick with the credit cards during reassembly is invaluable.
Your the man for figuring this out, it worked exactly how you described. 👏👏👏
Awesome, thanks, I have been trying to fit that piece for 2 months. I would never have got it back in place without your video. Great video keep it up.
Where did you buy the console parts? Thanks!
So crucial. Thank you. Struggled for 30 m before this video
One of the most helpful videos ever !!! I was about to snap that edge off and glue the rest in... This almost spoilt my weekend until i watched this video, very much appretiated 👌🏼👍🏼
The card slotting works very well, thanks so much for the tip! Cheers!
Thanking you for this video 7 years later
Freaking genius...as I was about to pull my already bald hair out, trying to replace this thing!! Absolute time and life saver!! Great video
Hello! Thank you very very much! I broke up the trim part, but your video help me to easily install. Even in BMW center they didn't know how to slide in! Your idea of using the card, was really great awesome. Thank you again bro!
Tip place the card first over a he lip then put the cover on I found that easier
This trick saved my night. Thanks!!
Awesome thank you so much I was struggling with it today 2 hours and found this video very helpful assumption lasted 30 seconds
Dude your video was amazing! I was installing some custom carbon fiber trim on top of the OEM parts and couldn't get that center piece back in place. With the 2 credit cards, done with ease! Thanks!
Thanks for awesome trick to slid the trim into otherwise would have not been possible. Hats off to you for this incredible tick. thanks a lot.
Amazing, we tried other way and it was impossible. Thank you so much for this video 👍🏼🙌🏻
What a trick messed around rying to get that trim in your trick went in straight away nice 1
Wow! That worked like a charm. Thank you!
Absolutely great solution!! Thanks!!❤❤
Dude got it 3rd try! Ur my hero
Thanks for sharing your experience with others.
Blimey you Don. Struggling for 10 minutes and then thought I’ll look it up and wow credit cards 💳 win through 😄..
Top man! Worked a treat 👍
This worked perfectly! Thank you so much for sharing!
Love the close ups. Very helpful.
This totally worked yesterday. Thanks.
The simplest idea are the best to get sh!t done. Great tip!
Saved my butt. Thanks
素晴らしすぎる!いっくらやってもハマらなかったけどクレジットカード挟んだらすんなりとハマった!
I have spent my entire day trying to figure out how to get that trim piece back in. When I found your videoI pressed pause, went out and tried it per your suggestion and now I just feel silly. That worked like a dream. I can’t thank you enough.
Can I get a link to where you purchased your new console trim pieces? I might need to order some before I am done .
Although they look the same from the outside, I wonder if it’s the same on X6’s (E71)? The door panels from the E70 to the E71 are different. This could be too.
Helpful video, great
Thanks man, you're a life saver!
Worked like a charm. Thank you good sir
Thank you brother
Great video! Can you please provide links to the two trim pieces? I'm wanting to replace them both in my 2011 X5, as I'm already replacing the parking brake module.
Jonathan Kudla have you found out?
I ordered the parts from Bavarian Autosport.
Yes Bimmer video dude, please link where you got parts, thanks!
Thank you 🙏🏽
This was great. I did just as you stated. Ok to be Honest I said to my self I don't have to do that. Well I ate my words and your words did the trick. Thanks for the help. One old man did change his way.
how about how to change the console roller blind rear and front? Mine broke and I don't know how to replace it.
OMG! Big THX! I was about to get mad :o
Thanks for help
Hello,
My cup holder cover is broken, can you make give me an advice please on how to replace that cup holder cover?
Thank you
Did you ever figure out how to change the rolling cover? I have the same problem with the back one, it broke and i need to replace it.
HELPFUL 💯
Αυτό με τις κάρτες, μαγικό.. .. προσπάθησα χωρίς κάρτες 2ωρες χωρίς αποτέλεσμα...με τον τρόπο,με τις κάρτες σε 5λεπτα!!
Hi, great video.Can you show how to take out the retractable cover for the cup holder on a 2015 model. I have a coin stuck behind it and its driving me crazy it moves every time the car moves.Thanks
+Ibraim Dauti Same here, dealership wanted to charge me $400. I sent a complaint letter to BMW USA. It's the most annoying thing. The dealership said it was my fault. About 3-4 coins are there and they rattle around. I have a 2015 BMW X5.
Unfortunately I don't have knowledge on the removal process on 2014+ models.
I just ordered the cup holder assembly for my 2008, since the draws are broken. I'm sure it's going to be a nightmare to install, but thanks sharing us how to remove and install the trim.
really thank you for your video SIR
How do you get your card if it falls down the back of the console?
Спасибо за видео
Thank you!!
Good day, the procedures is the same for E71 X6 ??
Yes
I want to replace the sliding doors that cover the cup holders. We're in the process that you just demonstrated would I remove the sliding doors? Just had some car cleaning guys break one of the doors.
Thanks a lot 🙃🙃🙃
Hey man, thank you for sharing that video
Where can you order this new part from, can you share a link
Question--the door closest to the gear shift snapped in half (half of it is stuck under the console). What is the best way to fix it? My Indy is saying it's a few hundred dollars you have to replace the unit and the labor. Thanks.
Where can we purchase the trim piece? Please share link Ty!
Hi, I've tried so many times by following your instructions but still can't fix the trim back to it position. What should I do next?😬😬
Great video and do you know how to remove the long trim each side of the console?
Click !!! And instead!! Thanks man !!!
THANKS MAN THIS WORK ME.
Nice one !!!
THANK YOU!!
Where can I purchase a replacement center console??? I cracked mine.
Did you ever find out where to get them?
eBay has some carbon fiber "look a like" parts here and there for the gear shifter, but i wasn't able to find the trim around the cup-holder area
I have an 09. Can you show how you the the cup holder console out? Thank you
Super
Brilliant
by chanse would you know how to pop open the headrest
Buenos días disculpa no hablo tú idioma , bmw x5 2007 la palanca de cambios se aflojó se mueve para todos lados Q puede ser ? Me piden 1000€ para arreglarla , si me puedes ayudar te agradecería de corazón.
Where did you bought that panel?
👍
👍🤝
You are the fucking man
fruitsnackman Thanks buddy I'll take that as this video helped!
Msg me or post a comment if you'd like to see something specific for your X5!
can you please share video how to change the cup holder part of x5
BimmerMarketPlace I’d like to know if the roller covers visible in this video are OEM available. Mine are a little gummy and worn out.
@BimmerMarketPlace pls give links to where you got console pieces, thanks!
😂❤
Almost lost all hope
🔥🔥🔥🔥🔥
🏁🏁🏁interesting race🏎️🏎️🏎️
1:59 🔥🖤🔥
👇👇👇👇🔥
Thanks for sharing your experience with others.
Thank you for saving my life.. 😂 this worked perfectly. Thank You 🙏🏽 Liked and subscribed.