Hi Leslie, thank you for your praise of our batteries. Choose circuit breakers size should consider the battery's discharge power and the inverter's power, please send us your configuration information via Facebook message or write to sales@dyness.net.
Hi there, I have two 2.4kWh dyness batteries installed 6 months ago and I have never seen the batteries discharge below 80% . I have a Solis inverter which I reset to factory settings but the batteries still do not discharge below 80% . I see from the comments that you say each battery has BMS software is there a way I can reset this software, I was also thinking about a forced discharge of the batteries to see if this removes the impediment to discharge. Aside from the ettings on the inverter is there another way i could force a discharge of the batteries. Thanks for the video.
Hi I have 2x2.4 dyness batteries and Solis RHI-6K-48ES-5G inverter, getting ,,Can communication failure,, message. I think it's the dip switch settings but I'm not sure where to find it how to set them switches correctly?
Hi I have a question that I didn't find in the installation manual and wanted to ask if the Dyness B3 battery can be installed upright instead of flat Thank you
good afternoon. I have 1 Dyness B3 4875 battery, it comes with a Sorotec revo 2 inverter. What DIP position is right? there are com cables for several types of inverters (victron, axpert, etc.) which one is suitable for the revo 2. Thanks
Hello, thank you for contacting us. Please push the"3", 0010.And you need to use a custom network cable with 3H5L cable sequence. Those three brands are compatible with Dyness B3. If you have any questions about installation operation， please contact our after-sales service:service@dyness-tech.com.
is it normal that the battery soc green LED indicator of each battery does not flash the same? I have set the DIP switches just as you have shown on a Dyness BX51100 5,12KWH parallel system of 3 batteries
Hello, Berty. I have received your questions, and I need to ask our After-sale, then I will give you an answer. Or you can send me a message on Facebook(Dyness Battery), thank you!
@@bertcywayne8051 Hello, you make a good point, and sharing it does help more people. But usually, the problem is complex and it is difficult to judge and solve in a short time with just a written description. In order to solve the problem more efficiently, we welcome you to send us an email to our after-sales service email address: service@dyness.net. We welcome your experiences once the problem has been solved and look forward to hearing from you.
@@DynessBattery Hello. I have a 7.2jw Synapse Inverter with 2 Dyness batteries working well. I have a 160A Fuse on the Positive side of battery. Question I want to add 3rd dyness battery. Can I just connect the number 3 battery In parallel and add communication cable and earth or Do I need to make other changes to my DB Board or add any other Fuses and Busbars first? Pls Advise. Thank you
Hi Dan, We have distribution network in European, for more information please contact us by email: sales@dyness.net, can quickly introduce you to local partner. Thank you.
Hello, B4850 is a battery module, Rack is possible to assemble from the battery module, you need to customize the rack according to the size of the battery module. If you would like to purchase or have other questions, you can send an e-mail to us: sales@dyness-tech.com.
We are Sorry for the Late reply. Usually, in the user manuals of our battery products, there are ways to deal with common and relatively simple error problems. If you cannot find it in the user manual, please contact our after-sales team：service@dyness-tech.com to resolve it for you.
Hi Teodor, Dyness is a battery brand specialize in Residential and CI applications for years, a wide portfolio range can be found in our website, please check, thanks.
Hello
I have one battery B4850 and Powmr 6.2 kW inverter, please let me know which DIP number should be turned on?
Thank you
hello
How can I find out the battery production dates using the barcode? B4850 Dyness
I live in USA are they sold here? Can you give website ? Do you have 48v Thank you
Hi William，thank you for your attention.
For more information please visit us at：www.dyness-tech.com.cn, we have various 48V battery solutions.
I have purchased the B4850, and excellent build quality. What size circuit breaker is used between battery and inverter? thank you .
Hi Leslie, thank you for your praise of our batteries. Choose circuit breakers size should consider the battery's discharge power and the inverter's power, please send us your configuration information via Facebook message or write to sales@dyness.net.
@@DynessBattery I have the 5kw growatt inverter and 8x 455watt Canadian solar panels connected in series with the B4850 2.4kw battery.
@@lesliepieterse1072 Hi Leslie, our after-sales engineer has already replied to you via the e-mail you left, please check, thank you.
What DIP number for Growatt 6000 ES? thanks
Hi there, I have two 2.4kWh dyness batteries installed 6 months ago and I have never seen the batteries discharge below 80% . I have a Solis inverter which I reset to factory settings but the batteries still do not discharge below 80% . I see from the comments that you say each battery has BMS software is there a way I can reset this software, I was also thinking about a forced discharge of the batteries to see if this removes the impediment to discharge. Aside from the ettings on the inverter is there another way i could force a discharge of the batteries. Thanks for the video.
Hello, Ian. Sorry for missing your comment ,did your problem get resolved? If no, we can help you contact our aftersale service
and? I think you didnt set it right
looks nice and easy installation
Hi, thank you for your comment.🤝
Does the B4850 have built-in BMS?
Hi Nathan, thank you for your message, every B4850 has built-in BMS.
Hi I have 2x2.4 dyness batteries and Solis RHI-6K-48ES-5G inverter, getting ,,Can communication failure,, message.
I think it's the dip switch settings but I'm not sure where to find it how to set them switches correctly?
Hello Peter, we're sorry for the late reply. Did your problem get resolved? If not, please let me know, we 'd love to help you.
Hi I have a question that I didn't find in the installation manual and wanted to ask if the Dyness B3 battery can be installed upright instead of flat
Thank you
Yes Kris, B4850 can be installed vertically.
Awsome!!!👍
Hi, thank you for your comment.🤝
Thanks Chinn :D
is it possible to connect a Dyness b3 battery in parallel with a Dyness B4850 battery?
Hi Aitor, thanks for your comment. Different battery types cannot be connected in parallel
good afternoon. I have 1 Dyness B3 4875 battery, it comes with a Sorotec revo 2 inverter. What DIP position is right? there are com cables for several types of inverters (victron, axpert, etc.) which one is suitable for the revo 2. Thanks
Hello, thank you for contacting us. Please push the"3", 0010.And you need to use a custom network cable with 3H5L cable sequence. Those three brands are compatible with Dyness B3. If you have any questions about installation operation， please contact our after-sales service:service@dyness-tech.com.
@@DynessBattery thank you
@@korneldemeter837 You're welcome, we hope that's helpful for you！
is it normal that the battery soc green LED indicator of each battery does not flash the same? I have set the DIP switches just as you have shown on a Dyness BX51100 5,12KWH parallel system of 3 batteries
Hello, Berty. I have received your questions, and I need to ask our After-sale, then I will give you an answer. Or you can send me a message on Facebook(Dyness Battery), thank you!
@@DynessBattery thanks a lot Dyness Battery. I think answering here might help somebody else in the future not only me.
@@bertcywayne8051 Hello, you make a good point, and sharing it does help more people. But usually, the problem is complex and it is difficult to judge and solve in a short time with just a written description. In order to solve the problem more efficiently, we welcome you to send us an email to our after-sales service email address: service@dyness.net. We welcome your experiences once the problem has been solved and look forward to hearing from you.
@@DynessBattery Hello.
I have a 7.2jw Synapse Inverter with 2 Dyness batteries working well. I have a 160A Fuse on the Positive side of battery.
Question
I want to add 3rd dyness battery.
Can I just connect the number 3 battery In parallel and add communication cable and earth or Do I need to make other changes to my DB Board or add any other Fuses and Busbars first? Pls Advise. Thank you
Hello, please tell me the model of the battery and the power of the inverter, we will answer this question for you.@@azeemcassim9366
Hi
Do you supply to European countries such as Republic of Ireland? Thanks.
Hi Dan,
We have distribution network in European,
for more information please contact us by email: sales@dyness.net, can quickly introduce you to local partner.
Thank you.
Solar failte in Shannon sells the dyness batteries
compatible for sma sunny island inverter this battery
Dear Adyler, we 're very sorry for missing your comment.Yes, SMA is compatible with B4850
Do you need racks if you use a cabinet?
Hello, B4850 is a battery module, Rack is possible to assemble from the battery module, you need to customize the rack according to the size of the battery module. If you would like to purchase or have other questions, you can send an e-mail to us: sales@dyness-tech.com.
donde puedo conseguir una tabla de errores de la bateria dyness 48100
We are Sorry for the Late reply. Usually, in the user manuals of our battery products, there are ways to deal with common and relatively simple error problems. If you cannot find it in the user manual, please contact our after-sales team：service@dyness-tech.com to resolve it for you.
If you need the user manual of A48100, please write me: samanta.he@dyness-tech.com❤
I would like to buy this module for my 4 us3000 batteries can you put a link to your website.Thank you
www.dyness.net/
hello， welcome to buy our battery. You can buy it from our official web: www.dyness-tech.com or sales@dyness-tech.com
how many watts per module??
Hi Ace,the Dyness B4850 battery module capacity is 2.4KW/h, find more information please visit:www.dyness-tech.com.cn
Where can i order 12v or 48v versions.
Hello Destaye, we have distribution network worldwide, which country you are from, can quickly introduce you to local partner.
@@DynessBatteryдоброго здоров'я! Чи можна дізнатися у вас про офіційних дилерів в Україні? Дякую за відповідь.
isn't this PylonTech?
Hi Teodor, Dyness is a battery brand specialize in Residential and CI applications for years, a wide portfolio range can be found in our website, please check, thanks.
Shut down the stupid music