Renault Megane ll 1.6 16v 2003 not starting. No crank. Fault finding and repair.
HTML-код
- Опубликовано: 15 окт 2024
- Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
Although this car was brought to me running, once turned off, would only start is pushed or if cranked manually by jumping the starter motor...
From the start button, nothing would happen, the ignition would come in, but no crank...
How I do repair wires: • How do I repair damage...
Follow me on this video to find out what the problem was...
Hope you enjoy the video.
Any questions or comments, please put them below.
Like always, thank you for watching!
![ARGENTINA vs. BOLIVIA [6-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 10](http://i.ytimg.com/vi/C3wPtKNbAOA/mqdefault.jpg)
Nice work I love it when people don’t give up on a job cars nowadays take a lot of Head scratching and Persistent but you get there in the end 👍😁😎
Absolutely they do!
Thank you for watching and for your comment!
👍👍👍
great job , this video highlights the importance of using live data to solve the trouble when the errors do not appear
thank you so mutch
I want another video
abderrahim amroune
Very true...
Thank you for watching and for your comment!
Hi. You just solved half of the problem. The Megane II should start only with clutch or brake pressed. What's wrong is the gear sensor that is not reporting neutral position. As you can check on minute 7:30, it says no reverse and not neutral.
Bruno Campos
Hi
I have solved what I have been asked to...
This on the video, as you can see was the only thing preventing the car from starting...
And also, saying no reverse is actually accurate, as is saying that reverse is not engaged...
But I know what you mean...
Thank you for watching!
Dear sir.
Thankyou so much indeed for this most helpful video.s superb production.
Very methodical precise and clear.
I've worked on my good friends Renault scenic 1600 petrol 2005.
I was never able to turn the ign on without the engine running.to use my autell maxidiass reader.now thankyou to you.I now can.
Thankyou so much indeed sir.you. are a top chap.keep up the great work and videos.
That's great!
Thank you, for watching and for your comment!
👍👍👍
Thank you !!!!!, release clucth pedal sensor was ok but press pedal sensor not working. The same simptome like you. Presing start/ stop button...nothing🙄 Now ingnite like new!!!!! 👍👍
☺️
👍👍👍
Im having a nightmare with my megane II rs225.It's a lottery lately everytime you hit the button whether it starts or not.
It started fine twice this morning,third time no start!Called recovery truck to get home,he put a scan took on it and he completely buggered something up,window he put down before he connected scan tool worked correctly,after this windows were dead,steering locked came on the dash,electronic fault then apoeared on dash,then wipers came on constantly,even when they were turned off??and display showed passenger door open,it was shut!!
So car is sitting outside in the frost tonight with window wide open and every light coming on the dash.
We initially diagnosed starter motor i fitted 3 weeks ago was faulty,which was possible as first new starter i fitted was faulty!!
Anyway,think i've finally had enough of it!Megane for sale!!!Megane for sale!!:-)
i like the way you explain things
☺️
👍👍👍
I have a problem with the ignition in megane II (the card does not get it the first time). The best solution would be to dismantle the ignition switch and "repair" or the problem may be elsewhere?
Next question. How to remove the ignition switch.
Hi, I have exactly the same problem with my Megane now and again, my local garage can't find anything wrong, I will suggest they check my clutch sensor. Thank you 👍😊
☺️
👍👍👍
Good video, just simple sensor that can not allow the Megan Scenic to start up. Thank you, for the video.
Indeed...
Thank you for watching and for your comment!
I had similar problem, however it came even further - after getting "electronic fault" message, I couldn't stop the engine, no buttons worked etc. After stopping it with brake and clutch, I several times disconnected the battery which ended up in totaly black display and dead car. No reaction at all, not even after change of fuse box, UCH and engine ECU. My fuses were OK, also those on battery + pole were checked by multimeter.
However, at the end I decided to disassemble the battery + pole fuses and one of them was wrong. Thus, all my few days efforts and headaches, one fuse was the reason of totally dead car.
I hope this helps someone..
Hi. Was The fuse in your battery + pole completely wrong kind of fuse, or was it in a wrong way there or what? I have The same problem with My Megane and I'm trying to figure out what is wrong with it.. same electronic fault message and car won't start.
@@hedgehoggis the fuse was blown up. Maybe due to some electric problem the fuse burned. Thus after changing it the car worked. Try to take out all these fuses and measure them or replace them (e.g. with wire) fuse-box.info/wp-content/uploads/2018/10/Renault-Megane-II-2003-2009_battery.jpg
What is the cheapest Autel scanner people are using to diagnose engine misfires on a 2003 Renault scenic rx4.
renault megane 1.6 16 szelep check injection hiba üzenet utan megállt az autó.ni lehet a baja?
Hello please my wouldn't start after entering water please what will do in automatic gearbox
Ive just had the same problem today with my mk2 megane 225, had to get breakdown truck to bring me home.
Car drove to petrol station fine, then button done nothing when i pressed it after getting fuel! No fault codes on my autel ms906, immobiliser light is going out, will do some detective work tomorrow! :-)
Hope you get it sorted! 🤞
Thank you for watching and for your comment!
Under UCH its showing starting conditions met 'NO', clutch pedal and brake pedal testing is fine, starter button is testing ok. Immobiliser light is going off with ignition on, and immobilser is inactive in Autel.
Thing that worries me Autel is showing key card recognised 'NO'?? Although it's recognising 2 cards are programmed to vehicle, and steering is unlocking when card is inserted.?
Three weeks ago i programmed a new key card to the car, and since then it's worked perfectly! It's strange this has happened so suddenly, there is no clicking coming from the starter motor,battery is good too.
@@robbocop33r12
Any codes?
@@LMAutoRepairs no codes!
@@robbocop33r12
What about the live data in the engine ecu?
Hi I have a problem with Renault Megane 2006 they don't want to start so what can I do
Scan the car and go from there...
👍👍👍
Great video mate 👍 thanks.
Please can you tell me how do you get the diagram for cars??
Hi, I wonder if you can help I have a Renault Megane 06 plate , I have a brand new battery but the car won't start. I insert the key and press my clutch but nothing happens I have a message saying electronic fault I have called out the AA today he believes it's the immobiliser but when I call to see if somebody can fix this they are saying it's most likely to be the key but I believe the key is being recognised as when I open the door it make a beeping sound that I left the key in, can you advise on any help
If you haven't yet, check fuses, relays etc...
Scan the car is possible...
Check powers and grounds...
Thank you for watching and for your comment!
I have megane 1.6 2008 i was setting the timing after that the car was fine so i went for talking it i changed the all gears it's was fine just after put it in nutrual the car showed select neutral since then doesn't start or crank help please...
Check everything you disturbed during the work you have done...
Check live data...
👍👍👍
HI . Soldering the wire will break off quick as I fold out. the best way I found, pull out the connectors, push the wire in and wind the wire aroud the terminal and push back in `the terminal. the wire will be quick tight in the plastic connector. JS
Hi
I have actually done it kinda that way, with the difference that I have soldered the wires to the back of the terminals, so the soldering point is inside the connector... that prevents the "folding" problem...
At the time of this video, the video for "How do I repair damaged wires." was not recorded yet... in there I explain that... I have added the link to that video into the description...
Nice comment John, thank you for pint it out, otherwise I would forget to link the other video...
Thank you for watching!
Good day i need some advise on our Renault Megane 2 2003 model 1.6L its not cranking or starting when bridging out the starter it cranks but still doesnt start it started doing this while i was driving the engine started cutting out i parked the vehicle and later it didnt even want to crank i have noticed that the fuse box has been worked on before it has some wires mainly for the headlights soldered on to it and the back of the fuse boz the pc board seems like it flashed and burned the rails around the head light fuses on the opposite corner of the pc board is the egnition and the starter solonoid fuses just wondering if it could be this fuse box or is there something else i should look at. Card reader and key seems to be working fine but the car also displays a immobiliser light that stays on when trying to start asswell as the battery light even though the battery is fully charged and brand new
Hi am looking to buy this car people told me it got wiring problems is it true. I love the car
Very true. Did you buy it?
I hope you stayed away from them. Beautiful car in all ways apart from big design floors which heavily affect electrics. Comes at a heavily price especially in winter when heavy rain falls!
Hi my problem is on the Megane II 2.0L 16v 2004. You can pressthe clutch and brake and push the start button, the ignition makes three jerk noises and nothing. Any ideas?
Check fuses and relays... powers and grounds...
Scan the car, and check live data...
Thank you for watching!
Thank you so much mine keeps cranking and does not start
Just brought a Megan and it never starts first time, also it very nessercery to press the brake and clutch when I press the button
I have 1 other problem when I sometimes steer to the right quite heavily, I get a kind of ticking noise coming from the left hand wheel, could it be dangerous. Thx
Check the drive shafts....
Thank you for watching and for your comment!
Good on you Imsvvavr good fix I have done the same for my R/h head light circuit trip relay from L/h head light and run a fused wire to r/h light been working that way for 3 years
John Timbs
Sounds well done!
Thank you for watching!
exellent video i realy enjoy watching you do your things on cars
sadik mamoun
Thanks Sadik!
hello LM thanks again for ur great video , on 5:48 minute the live data shows us that ''card received button pressed (no) and card reognized button pressed also is (no) , is that normal ??? however the card was puted and the ignition was on !!!
Hey,i have a Megane 2 and is not starting, is a message on the display that say “battery low”. I changed the battery but still is not working. Any hints?
Does the car cranks?
Check grounds etc...
What it the battery voltage?
Thank you for watching and for your comment!
The battery is new and the car don’t cranck and the red light is on. I have a code reader but it doesn’t connect with the car end I don’t know why!
@@kryc111
Check what I have mentioned...
And find a way to read the car, and see what is in there...
hello , i am having the same problem at the moment and i am wondering if you can tell me where i can buy a max system scanner
Look on Autel website for resellers...
But you have cheaper options... this one is not particularly cheap...
Thank you for watching!
Great video and that was really strange, so it had 2 switches the clutch pedal? Thanks
Hi
Yes... one detects the clutch fully pressed, and the other one depressed... apparently is the system used for the cruise control, even though was not fitted on this car... french ideas... lol
is the maxim your goto diagnostic reader if so where do i buy one
I have immobiliser problem, the light is flashing, ignition turn lights on doesn’t crank or start
Have you scanned the car?
Look at live data...
Thank you for watching!
I just pass with my van through a big puddle of water and no is not starting anymore and the diagnostic tool shows me a code UPC DF007 and description on the code is (UPC - Alternator Link Invalid). do you have any idea what the problem is? thank you!
I would say the water reached places that should have not get watered...😉
Check grounds and check where the water went... it could have shorted the alternator... just a guess....
Thank you for watching!
@@LMAutoRepairs Hello again, Thank you for your replay. My above explanation I forgot to add actually the car is not even cranking so what you think about that?
So that still could be the alternator? thnaks
@@lucianopris7953
Difficult to say without looking at it...
Sorry...
@@LMAutoRepairs ok so how I can contact you, thanks !
@@lucianopris7953
I am quite busy at the moment...
Sorry...
So interesting how he does it
😊
👍👍👍
My brother has this car (2008) and some identical problems. When it's warmer outside (22 celsius), the car is not responding just like yours, and then after a minute (or a few minutes) it eventually starts. When it's colder outside, there are no problems with starting it. What could that be? Any ideas?
Have you scanned the car?
That's your first move...
Thank you for watching!
Not yet because those problems occured last week. We have to take it to the mechanic next week to take a look. I am really curious what's wrong. Will report...
@@BastarD
👍
But if you pressed the brake pedal before the repair instead of the clutch, the car started?
No... It needs the clutch pedal...
Thank you for watching!
@@LMAutoRepairs Thanks to you...But with this car you can press the clutch OR the brake pedal. I have a similar issue. Sometimes i press the clutch (or brake pedal) and car starts after some seconds...
Hi
This was not my car, and I can not recall exactly how the car was behaving... but, as you can see at the start of the video, I press the brake pedal and the clutch, and the car still not starting... if that was the case, would have started...
I have the 2008 Renault megane extreme 1.6 and occasionally it is not starting. It will make the clicking noise once but engine will not turn over. Then if I leave it a while it normally will start. Anyone know what this could be?
Hi
Have you scanned the car for codes?
It can be a bad relay... might worth checking them...
Thank you for watching!
Great video thanks. Do you have a link to where the diagnostic tool can be bought please
Just check Autel website...
Or eBay...😉
Thank you for watching and for your comment!
Hi bit of a issue with this video as I know these megane you don't need to press both pedals in order to start the engine correct me if I'm wrong you can either press the BRAKE or the clutch you don't need to depressed both so believe u solved half the issue
Tristan Mckenzie
Hi
What do you mean half of the issue?
The engine stared fine ever since...
And think it depends on the variant... some do not have the clutch switch, so you only need to press the brake... but if the clutch switch is fitted, you need to press the clutch... I might be wrong, but that is my understanding... the is still running, so I am happy with the result...
Thank you for watching and for your comment!
LM Auto Repairs well now u have explained thanks, keep up the good work your vedios are great and very detail your a modern day Scotty Kilmer, I can see your channel going a long way!
Tristan Mckenzie
Thanks!
Really appreciated!
👍
Thank you
☺️
👍👍👍
the upper switch is for cruise control. I don't believe you was surprised xD
MrBorntoroll
I don't know if that is entirely correct...
If it was for the cruise control should allow the engine to start... as this car is not even fitted with that option...
With or without cruise control, the car needs to see the signal from both sensors... one sensor for the engine module, and the other one for the UCH...that is my understanding of the system...
Thank you for watching!
Tnx bro
I have a megan sedan 2004
Battery is ok start work but don't turn on can u help me?
Körkort på Persiska Vardagligt Språk
Hi
Have you scanned the car?
Looked at some live data?
Petrol or diesel?
I am not a wizard.... 😉
Thank you for watching!
LM Auto Repairs
No i didn't but I guess maybe hade problem on relay or fuel pump or air for engine because I have electricity on my dashboard, my car is petrol Manuel! Thanks you again 👍🏻
And actually I don't know from where I have to start and check the car I haven't like this car before
Körkort på Persiska Vardagligt Språk
Get the car scanned to start with... otherwise is guess work.
Körkort vet du vilka problem hade du på din bil ? Det drf har problem på min bil då kan ej starta min bil heller! Hjälp mej lr va ja ja måste byta med delar. Många berättar att måste start motorn byt?.
7:56 The scanner reads "NOT NEUTRAL" ; obviously the clutch switch/sensor matters,or the car would start and shoot "forward"!
But if you put it in neutral and press the BRAKE,it should start,no?
Possibly... but not sure if that is a feature that is fitted yo all the Renaults...
Thank you for watching!
Not sure these manual cars should have any sensors regarding clutch when starting. You should be able to drive with starter motor even. (e.g. with a gear engaged)
Thank you so very much, I have the very same problem, I hav lost some cash but it's not too late, thank you
Hope you get it sorted...
Thank you for watching and for your comment!
👍👍👍
How do you start the engine manually
Push start...
Thanks...
@@LMAutoRepairs 🙈 well obviously but why does he point to the engine and say to start it manually
Hwo to fixe this message
df038 calculateur anomalie electronic intern memoire
i love your acent! where are you from? is there any free programs for renault?
😊
I am originally from Portugal.
There is a few... just google them...
😉
@@LMAutoRepairs hello thanks for answering my question. I tryed again to start my renault megane 2. ... When I put key card on and press clutch and brake. Car won't start it just says. "steeringwheel locked please remove card" and service light is on.
@@LMAutoRepairs and the wheel actually is not locked. So the car thinks it's locked?
@@SpringWaterPaul
Possible... check live data... and if that is confirmed, remove the lock and inspect!
thanks ! 🙋♂️
😊
👍👍👍
I had that model of car and never again will i drive one again
cork dude
Fu*king car ,, i hate it💩
Would it be a faulty key card
It can be many things...
You are not giving any details of the issue...
If is the card, you will have the immo light on...
great steps , clear explaination thanx buddy
Tanks, for watching and for your comment!
super video again buddy
Thank you Paul!
Thats a failsafe system..when you select a gear and want to start the car without engaging the clutch the car wont start. Only when you press the clutch pedal the car starts
Mujtaba Almodhafar
Hi
Correct...
Thank you for watching!
Well done 😉
mohammed ali
Hi
Thank you for watching and for your comment!
Welcome my friend , I'm 30 years old, I started working with audi company for 3 years and then Mercedes benz for 4 years, and now working in BMW ☺ Germany car """"
mohammed ali
An insider... 😉
Lol
Why do car manufacturers overcomplicate things-no wonder Renault have such poor reliability-think I'll stick with my 2001 Honda civic😀
😋
And you will be just fine!
Thank you for watching!
👍
👍👍
Thanks!
👍👍👍
you gota love the french wireing ...lol
Lol
They keep you in businesses...😉
Thank you for watching!
Any one can help my megane crank but not starting
Have you scanned yhe car?
Have you visually inspected, connections, etc?
👍👍👍
I'm having the exact same problem now :/
Well... at least now you know how to resolve it...😉
Thank you for watching!
@@LMAutoRepairsit was a different problem though, a main fuse had blown out
@@superhuan
Great you found it...
Thank you for the feedback...
ONE POINT SIX (one liter six !!)
🤷♂️
Megane not starting won't start on push or tow was driving fine its diesel
No one will be able to help you based on the info you are giving...
Start by scan the car...
Thank you for watching!
It s too simple isn t the sensor it s from the battery you must change it , i has the sem problem and it is resoved
Perhaps in your case... as you have possibly seen, in this case was this...
Thank you for watching and for your comment!
Buta, terjengős? yes?
🤷♂️
Brocken alternator
Shitty renault cars, regret my megane 2 purchase, next one will be a japanese one for sure...
intermitent problem
عبدالله العريبي
Hi
What do you mean?
Thank you for watching!
Kanalmda çeşitli vidyolar var
piece of shit...great video
Big layer , this just from the battery decharge
What?
Layer of what?
I am really confused with your comment...
🤷♂️
This car is full of shit