Dodge Charger, Electronic throttle body light flashing on the Dash, code P2173. Low Power problems..
HTML-код
- Опубликовано: 8 сен 2024
- in this video I will share with you how to diagnose a defective ETC that causes the lightening Bolt light to come on, on the Dash...
Hi, I have a Dodge Charger 2008 SXT
My car had the same Red Lightning Bolt whenever I would be at a red light. The bolt would appear and my car would go idle, so then I would have to turn it off and back on again to get it to work again. I read all the possible problems such as the Throttle Body, O2 sensors, PCM/ECU, blah blah blah. I ended up getting a new Throttle Body and the problem was still happening. So, I took my Charger to a mechanic who said it was my PCM/ECU acting up and that it would cost me about $900 to fix it. Now look here, I'm just a 20 y/o college student I don't have the type of money for that. I kept looking for possible solutions and I ended up coming across a comment on RUclips that said before you start changing the throttle body, PCM/ECU, etc. make sure to check your EGV Valve and see if your gasket is not damaged or missing.
I took a look at it and there was the problem the whole time. There was no gasket on my EGR Valve at all. I went to AutoZone and bought a EGR Valve Gasket ( the blue one, cost me about 3-5 dollars) and put it on my valve. After that, my car hasn't gone idle at a red light or stop sign since. Before you start changing all of your parts and taking it to mechanics, check your EGR Valve Gasket. Hope it works! 😄
Banny Thanks for your input!!
I put gasket on light still coming on
this is what I'm getting ready to try also, my only worry is that when I wrap my hand around the egr valve tube hole where the gasket will go to seal it, it starts running even rougher
U drive a Dodge? Ok, here’s the fix - drive it off a cliff. Na , did you figure it out?
Any luck?
I have a 2006 and mine wont ever turn over. I tried the ETC resetting procedure but nothing. My check engine light started to blink once i started the procedure. The battery is good. None of my lights dim or die as the car is on. I think its the ETC and it needs replacing but im getting it professionally checked out. Nice video ! Thanks for the information!
@MaxPotentialGreatness My Pleasure! Good Luck with your vehicle
This was a pretty damn good step by step tutorial on what to look for. With watching this video I was able to figure out which sensor in my Dodge journey was faulty thank you for the awesome video
Luis Gonzales My Pleasure!! I'm so glad to hear that...
Instablaster.
I have a 2010 charger doing the same thing, I didn't scan it though. Great video, I love how you explain the process.
@rocky7522 THANKS!
Did you get it figured out I have a 2010 as well
@@samgunnaa1333 mine turned out to be the egr valve tube not having the little o-ring and not being fully inserted.
How much was it I have a 2010 charger with the same problem as well
@@ronelllee6983 not very expensive, it came in the plenum gasket set, not sure if you can get just the egr gasket
Clean MAFS, throttle body and intake manifold control valve. Change spark plugs and coil over packs. Replace fuel filter and fuel sending units (driver and passenger side - under back seat). Run can of SeaFoam through full tank of premium gas to clean all sensors. Car will run like new.
Ya….. no, still stupid lighting bolt flashing and no response from pressing accelerator
@@mayken6661 replace accelerator pedal
I did all of this and it still flashes it’s the pcm
I replaced throttle body and pedal with sensor still lightning bolt comes on runs poorly
@@jeremywesley4799 check your pcm for corrosion or if it has a chip and take it off
THANK YOU SO MUCH. It has been a nightmare trying to figure out whats going on. Everything kept saying its a PCM issue, but it was the seonsors giving false info. Thanks man
msan3001 My Pleasure!! I'm glad to hear that your car is fixed!!
Where is your shop I’m having the same problem with my 2010 Dodge Charger
I changed my accelerator Pedal Position Sensor and it fixed my problem
Addison Russell Good Job!
Hi Addison, Can you tell me where the pedal sensor is located, i have the same issue.
awesome video. you were thorough and explained everything. this is how diagnostic videos should be. thank you
DAVID stFRANCIS Thank you!
The best explanation ever
@pearlcallender2780 Thank you!
Really enjoyed that looking forward to the next ones
jeffrey herbert Thank you, I'm glad you enjoyed the video...
Thanks for the video bro I was able to fix my car with your help
Daniel Osuna I'm Pleasure! I'm so glad to hear that!!
Im having the same problem on my 2013 Chrysler 200. From my research the ETC ,has plastic gears ,like 4 of them ,that control the spring loaded flap. Theres alot of tension on the flap, putting alot of pressure for fhe PLASTIC gears to work. Over time ,heat ,the elements ,wear the gears become wore, chipped or even missing teeth. This is why sometimes the car will run, other times if its at the wore teeth part,it runs rough n the light comes on. Best advice is replace the ETC, with a new one. May have to take to shop to get it relearned after installation, with a proper computer tool. Good luck everyone. Btw you may drive the vehicle awhile, before it gets bad fix it BEFORE it breaks completely, in the middle of nowhere
The best video yet
@MichelleRiffle Thank you!
I had that same light come on on my 13 dodge charger rt 5.7 all I did was cut the car off then put it in run position without turning the car on press the gas pedal down fully to the floor let up on the gas pedal very slowly then restart the car not saying it works for all but it worked for my charger
Tacarla Thomas That's good, Thanks for sharing!
Just replaced map sensor and vapor canister purge valve on my 2010 Dodge Charger. After these were installed the throttle body light came on with the traction control light and engine light.
@markpickett9391 check for a vacuum leak!
Thanks will do we checked the new map sensor and the hole was bigger than the original one.. put the old map sensor back and the car runs way better.. the check engine light and the others are no longer on. I will be replacing the map sensor with the correct one even though eBay mentioned this one as a fit.
THANKS 4 UR HELP -----THUMBS UP
@daviddzedzy9194 My Pleasure! Thanks
Proffesional job . Appreciate all your efforts ..
bilal flayeh thank you
You are amazing with your details of just what to do
simpson washington Thank you!!
@@KITS_Auto_and_Truck_Repair your welcome i thought i was in a mechanic course!!!!
@@Fats-yg1jd I appreciate it!!
You're doing a great job bro learning a lot.
Be blessed.
Eddie Davis Thank you!!!
Great video. I like the detail. Thanks.
K Wills My Pleasure!!
well done thanks mine was doing the same thing going to try your method....
Young Baretta My Pleasure!!
Red lightning bolt light plus high idle while in park. My 2005 chrysler 300c is doing this. Even after changing the throttle body. Plus the ESP light is on.
Charles Guero Check for vacuum leaks!!
Thank you, finally fixing this crap right now.
John Berninger My Pleasure!!
When I had a throttle body issue a few years ago, my traction control light came on.
Ivan Peterzell really? thanks that's good to know, I will keep that in my records...
Yo how’d you fix it, I got the same problem right now
I have that same problem
Same here how did you fix it ?
i also just got this malfunction today with the red bolt and traction control turns off randomly, i have a 09 dodge charger sxt, need help
Thanks for the video
Rebel My Pleasure!
My 2008 Jeep wrangler JK Unlimited has the Red Lightening Bolt. I have so far replaced Throttle Body, Accelerator Pedal and Camshaft position sensor. The red lightening bolt hasn't gone and my Jeep has no acceleration.
Francis Mwila make sure you don't have a vacuum leak!
Thank you Sir you're so awesome 😊😎 this is the best video to explain it
nick platas My Pleasure!! Thanks!
thankyou thankyou heres un chingon,muy buena explicacion,thanks
Jorge Lerma My Pleasure!
Excellent !
@ericburk7301 Thank you!
Amazing video. You should be an instructor.
Michael Kistler Thank you!!
What code reader are you using. ? Mine doesn't have the options you have.
@ericburk7301 I used my snapon zeus scanner in this video!
Thank you so much!! This was so helpful im a woman and I feel excited 😊
Taneia Miller My Pleasure!
What does your gender have to do with anything?
I am driving a 2010 Dodge Charger SXT and I am having the same exact issue. I turn the car off and back on again and the light will stay off for 1 day before it comes back on again (always flashing and with the traction light). So far, I have cleaned the throttle body, replaced the spark plugs, replaced the intake manifolds and the "ignition coils" and still...... I am going to have my mechanic check the sensors next b/c I am struggling with getting this fixed. Its been about 1 month since this issue began for me.
@VibesOnGo Taking it to a pro mechanic who can diagnose it sounds like a great idea, Good Luck!
@KITS_Auto_and_Truck_Repair It took a week and several techs, but it was the EGR Valve.
Excelent video , as usual I am happy to watch such videos like that , but , I would like to ask you about the graph after changing the throttle body ( the two opposite curves of tps1 and tos2 ) is those the same graphs of APPS or different ? Your reply will be highly appreciated , thanks
Mohammad Al-Gebaly Thanks! The graphs on the scope were the voltage change of TPS1 & TPS2 on the throttle body!
Please respond asap! I’m having this issue with a 2006 dodge charger I purchased a few days ago and I’m supposed to be leaving for vacation in two days!!! How much is this going to cost to have fixed and how long will it take? It’s the only car I have and i need it to drive out of state on vacation 😢
@caitlynnpalfreyman I recommend you take it to a pro mechanic for diagnosis!
GREAT VIDEO
Ronald Kirchner Thank you!
Hello, I have a 06 charger rt and when my car is idling it randomly cuts off with the throttle light flashing. Can you see the video short on my profile and give me any pointers?
@7KingMak7 check for a vacuum leak
@@KITS_Auto_and_Truck_Repair okay. Did you see the video? I also emailed you. Can a vacuum leak make it cut out randomly like that?
I have the same problem with my 2010 charger, but I replaced the throttle body and injectors, and it's still the same issue
Ernesto 503 es79gmail Ernesto 503es79gmail Check for a vacuum leak!
I am having this issue with my 2010 Charger as well. I changed the spark plugs, cleaned the throttle body, and changed the intake manifold and ignition coil, and the light came on 10 minutes after I picked it up from the shop
I have the same car same problem. Took a week and several techs, and it turned out to be the EGR valve. They also cleaned the flaps as a just in case and replaced the manifold gasket
Dude got my whole set up even the same deck. Crazy
Pete0Almighty awesome!!
My first time here what is the of the Computer tool u was using for to check all the codes n stuff thanks
*THEO• BOYEE•559* in this video I used the snapon zeus scanner! and welcome to our youtube community!
hey duel (i think thats ur name sorry if wrong) I have a MB 906 its 2007 and 2.17cc engine. I have an OBDII error code P1955 I can't find any threads about it online and there are no DTCs that relate. Do you have any experience with this code? I have been chasing it for months now with multiple visits to various mechanics and diesel specialists with no luck. I'm about to pull the throttle body off to check that but I'm really not sure if that's even the right place to be checking. Any help or best way to troubleshoot would be a great help.
@toffeetv9623 check your glow plug circuit!
THIS WAS AWSOME
Raphiel Fabre Thank you!
Waiting for next video like this…..lol…….
大黄蜂 Bumblebee Thank you!! there will be more videos coming out!!
Appreciate it alot for the work u did it help me alot and save me alot of money 👍👍
grillito p My Pleasure!! I'm glad to hear that!!
The same codes came on my car I took it to the shop they charged me 500 dollars for a new fuel pump and and something else where I got my car back the check engine light was still on when I ask they said they forgot to rest it now a month later the check engine light came on again and the electrical signal. Also my car has completely stopped on me in the middle of the road and on the freeway
Taylor R I'm sorry to hear about what you experienced, I recommend you take it to a pro mechanic to have it diagnosed correctly!
Mines did the same dang thing.
I have the same exact issues with the throttle light and the check engine light coming on with the same accelerating issues except now it has high rpm but absolutely no throttle what could it be? Throttle body, computer itself, or the acceleration pedal need replaced or What can I do to fix it.?
TAMMY FRANCO do the tests I did in the video to figure out what's defective!!
Today, I returned to my 2014 dodge charger after being at the gym for less than 1/2 an hour. I think I may have hit the ignition button and maybe had the auxillary on when I went inside. When I came back I got that flashing red lightning bolt and my car wouldn't start, and my display started flickering and dying as well as my headlights. I had to Uber back home just a couple miles and leave my car there because it was getting late and super cold, like freezing. Could it just be the battery that got too low with the auxillary on? My uber driver said an old battery will kick the bucket when it starts getting cold.
Jonathon Grinols Yes Start by Replacing the Battery!!
Excelente Excelente 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👌👌👌👌👌👌👌
Eduardo CP Thank you very much!!
will driving with this problem cause more issues if not taken care of quickly? what’s an estimated cost if i took this in to get it fixed?
skylar I recommend you take care of it as soon as possible, You can email at Deo@calleva.org for a quote!
I have an issue in my 2010 Dodge Charger with Electronic throttle light comes on. I can drive it for 30 minutes and then the light will come on and once I turn the car off and on it resets it. I’ve replaced the throttle body and the gas pedal but now I can’t figure out what else is wrong or how I can fix it now.
Alexis Cameron check for a vacuum leak on the intake!
I have a similar problem but I’m having more codes issues when the failure comes with the red strike the codes are referred with the oil pressure sensor, and the crankshaft sensor Did you see a similar synthom before ? thanks for your support
Cesar Fraga no I didn't !! did you check the crank sensor!!
Is there a way to calibrate the throttle body without the scanner?
@chriskelly343 I believe so! check out the previous comments of this video, one of our friends here shared with us how to calibrate throttle manually
Amazing man 🎉❤😊
ibsphones Thank you!
My 2010 charger sxt with 3.5 was doing the exact same thing with the esp/bas light on as well as throttle control light. I changed my throttle body and still have same issue. Is this because I didn't calibrate ?
Richard Vaught yes it could be because of calibration but if the light stays on after calibration, you should check for vacuum leaks, I have seen an intake vacuum leak cause the same problem, I'm assuming your wiring for the throttle is good
@@KITS_Auto_and_Truck_Repair yes wiring is good. But I can't get the TPS/BAS light to go off.. Thank you so much for the feedback.
@@raiderrich8355 how does the car run? did you check for vacuum leaks?
@@KITS_Auto_and_Truck_Repair no vacuum leaks detected. The lightning bolt light comes on along with the tps/bas light. It runs good until the lights appear then the idle goes up and has no throttle response.. Im starting to think I got a bad throttle body? I have bought another new one but haven't installed it yet. I'll let you know the result. Thanks again for your response and caring it's much appreciated.
@@raiderrich8355 My Pleasure, Let me know how it goes...
Great video very helpful
Smokin ' Metal CarFun Thank you!!!
Good info. What r u located. My 06 charger. Start doing something similar but All the light turn on. And also. Trans. Start having problems. So mechanic changed. The pcm. Also. Dis the heads job still having that problem. After drive the car about 20_30 min
Fer Cortez I'm located in Dickerson MD
What's the name of this Vehicle scanner.? , i would love to get one
@restomoghene3021 I used my Snapon Zeus scanner in this video!
Maybe I misunderstood but how did you determine it was the throttle body and not the pedal sensor?
Leon Perez I checked the pendal sensor off camera, and it was good no drop out or glitches on the signal from the pedal sensor... but the signal coming from the the TPS had a lot of drop out and glitches, indicating a bad TPS
and also make sure you don't have a vacuum leak around the intake
Hard start when hot because throttle ?
عبدالعزيز بن مصطفى Hard start when hot can be caused by several things, check your engine temp sensor or make sure you check spark and fuel while it's not starting!!
Can I get step by step what to do if it’s a vacuum leak
Life With Q I have videos on this channel where I'm doing vacuum leak tests, on others vehicles, it's the same process!! I recommend you watch those videos
How much does it cost to get that done?
@dennisforney5259 Send me an email and I will send you a quote!
great video was good love it man i need that scan tool
Glen Bailey My Pleasure!! I'm glad you loved the video!!
And will that make the car shut off and not at start back up
Does this apply to a 2007 Dodge Charger
mercedes calhoun yes they are kind of the same but make sure you don't have a vacuum leak!
2015 Dodge Journey having the same issues. Throttle body replaced and still having lights on. Check engine and throttle body code. What should I do? Dealer said No vacuum leak.
Chandra Payan Check the EGR tube seal, it's a O-Ring! or Throttle wiring, check ecm if it's functioning properly!!
I changed Throttle body but car have same issues again what can i do
sukh sidhu make sure you don't have a vacuum leak!!
Nice help but need more. I have 04 Durango hemi lightening bolt light on and engine won't crank. Replaced Throttle body still won't crank. Please help
David Graham Check the starting circuit, starter relay, wiring, ignition switch etc...
What to make sure to not let throttle happen again?
Umer The Magnificent I didn't understand your question!
What if the throttle body light comes back on after throttle body is replaced ? And the check engine light doesn’t go off
David Holmes a Vacuum leak can also cause that throttle light to come on, so make sure you don't have a leak around the intake, I gave 3 different options of what could be wrong in the video, did you investigate all of them
Did it fix it i have the 3.5 2010 an having the same out come wasnt nothing on an ran perfect had my radiator changed to 3 row am it been stuck with burn out light on an the red demon lighting bolt any advice where to start loolong
There is also a small blue little donut gasket on the egr valve tube that gose into the back of the air intake and if its bad or loose this will set the lighting both light off to .
Im having the same issue and my car wont even start, ive already replaced the throttle body and still nothing
@johncunningham3850 check for spark and fuel pressure!
Can you put a link to where I can get the part. I couldn’t see it in the video.
Deal Kenkade I got the part from my local Dodge dealer, if you call your local Dealer they should have it in stock...
Not for 43 bucks local dealer wants 4x thst
Thank you soo much for making this video.. i am having this exact issue with my charger.
After replacing the throttle body how do i calibrate it without the scanner.?
jessica morales I don't know how to calibrate it without a scanner, I don't think it's possible, you can take it a shop to have the throttle body calibrated after you replace it... also make sure you don't have a vacuum leak on the intake manifold before you replace the throttle... Good Luck!!!
Thank you! 😉👍
Keep up the excellent work!
@@jessicamorales7418 you're welcome!!!
Turn key to on position...not start but on where all lights on dash light up but engine is not running...next slowly...very slowly depress the gas pedal....after depressing all the way down...slowly let the pedal back up...very slowly again....turn key to off position...start engine...let car idle for 10 mins with no accessories on....next...turn ac and can on high for 10 minutes....drive car....should reset throttle
@@anthonycrosier8824 thank you for letting me know...
One question since maybe you know about these cars what does Lo EirE mean ???
@jplug5650 I do not know!
Mines comes on sometimes and sometimes it dont, but when it comes on, my temperature gauge drops to cold, already changed the temperature sensor thermostat, water pump.
Swerve Hard Also make sure you don't have a vacuum leak!!
great job interesting but what type of scanner is these very powerfull !
Rami Abou Assi thank you... I'm using the Snapon Zeus
Great video man
Five-O Boosted Thank You!!
Ambient sensor light won't go off even after replacement, already changed the gaskets as well
Gabe Davis check the sensor wiring and make sure it's good!!
@@KITS_Auto_and_Truck_Repair don't think so it never showed a signal when tester put on. What do u recommend
@@G1276boy Take it to a pro shop and have it diagnosed!!
my car doesnt want to start and has a buzzing sound when i try to start my car & with the red lighting bolt. this started happening after I took off the top from my car next to the throttle body 22012 dodge charger
JJ Snchz does it crank? if you have a scan tool, scan it and see what kind of trouble codes you have in memory!!
My 2008 charger 3.5l has the ETC light flashing. And I have no throttle response. What could this be?
Colin Drury check the throttle, or the wiring!!
But was your vehicle running without warning light after? Important point i'd say?
Thomas Kuczaj what warning light?
Como puedo calibrarlo manual sin escaner broo
Navarrox2 oficial I believe it's been mentioned in the comments, how to calibrate the throttle manually!!
What if the light is on but the only codes are an ABS thing ?
Grant Howard ABS Codes should not cause the lighting Bolt to come on, you might have some codes too!
@@KITS_Auto_and_Truck_Repair - we are not able to get a reading for any other codes, so I’m not sure where to start. Any suggestions ?
@@granthoward5423 what do you mean? can you scan the engine computer?
@@KITS_Auto_and_Truck_Repair - I think. My brother scanned it with something that plugs into the car and shows information on his computer, and all it comes up with is an ABS thing. So we’re not sure where to start, to fix the lighting bolt
@@granthoward5423 Get a good scanner first
What is it when the throttle body change it crank and run sitting still and then it goes bk to unable to stay run and shuts off
Code p2112 and p0688
Calvin M's I'm sorry I didn't understand your question!!
How much was the throttle body
Calvin M's around 300$
I have the same code but I don't have a lighting bolt on my dash
@waltermorris1316 Check your throttle body and make sure you don't have a vacuum leak!
Ok I will do that
Iost all lighting in that sector.
Shaun Laverdure_78 that sucks!
Wow what’s the name of the software you use to collaborate the throttle body???
Leatherneck Sears I used the snapon zeus in this video!!
My 2006 Dodge Charger does this but when restarting car the car turns off and will run better until it pops up again. Every time I restart car it resets it. What could this be
Eric K make sure you don't have a vacuum leak on the intake or you have a defective throttle body but check the wiring first before you condemn the throttle body...
I have same vehicle I change the throttle body and sensors on it changed wiring and sure enough I did find a very small small trans leak in my trans cooler hose
@@saddamlucdahlia7842 oh really? I'm glad you were able to find the leak!!
@@KITS_Auto_and_Truck_Repair yep sure did. Under car by the motor & trans. Also I’ve knw some tipm need to be reprogrammed also
@@saddamlucdahlia7842 really? do you have to program the tipm on this vehicle! I thought it was just plug and play?
Anyone have a problem 2006 dodge charger p1004?
Jose Acosta Check your intake Runner valve and wiring!
I get a lightning signal in the car once a week and I lost the accelerator pedal after stopping the engine and running it and the problem is solved Dodge Caliber
Hemid Bdran Your Throttle body assembly might be going out, you should have it diagnosed!!
👍👍👍👍
Aymen Mohamed Thank you!
My car light is coming on the same way
@ernestcalloway1100 I recommend you take it to a pro mechanic who can diagnose it for you!
good v o
Frank Young Thanks!
did you also change the sensor?
Walk Montana which sensor?
throttle bottle servi
So I cant do it without a computer to recalibrate my throttle body?
ad mckee it's easier with a scan tool but you can do it manually also. the manual procedure is mentioned in one of the commens of this video!!
@@KITS_Auto_and_Truck_Repair resetting the throttle?
@@mckeecrew no Calibrating it after installing a new one!!
Ok well I have a 04 Dodge magnum and it stopped on me while I was driving and my lighting bolt ⚡ was on but wasn't flashing or anything before that it was driving fine smh
Kelly Stacker I hope this video can be helpful to you!!
i have the same problem but my car doesn’t turn on…. need help
Botog24 if your car doesn't turn over you should check your starting circuit, starter relay, starter and ignition switch!! I have a video on this channel that shows, how to diagnose a starting system, the video was on a hyundai sonata, it's the same procedure, check it out, Good Luck
What if I have a p0452 code
SouthernSmoke That's a Evap code! check the evap system
This is exactly what my 2008 dodge charger is doing but happens after three minutes
tresslure gaming Your throttle body might be bad but make sure you check for a vacuum leak first!
@@KITS_Auto_and_Truck_Repair I did I've replaced the fuel injectors and the coil packs spark plugs and seen three hoses that have crack but doesn't seem to be causing a leak theres a sensor on the top intake when u unplug it while its running doesn't bog down or anything and the one on the rubber right after the throttle body when u unhook it it doesn't do anything either and the car drives great until u park in and about 3 minutes go by it starts doing what this car is doing
@@MrAqq147 that's odd!
@@KITS_Auto_and_Truck_Repair yeah had me confused lol I'm gonna try a new throttle body if it works I'll let u know if not I'm gonna start replacing those sensors wish I had ur set up man
@@MrAqq147 I recommend you rent a smoke machine a smoke the intake manifold you might have a vacuum leak
What if the car won't start but it use to
Jizzie check for spark and fuel!
Traction control and throttle body lighting bolt on in nk my nk 08 compass
dana trepanier you might have the same problem!!!