Working of a Push Pull Converter

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 19

  • @akhilgeorge7681
    @akhilgeorge7681 3 года назад +1

    Very well explained. Great. Keep doing similar videos.

  • @iamriyas3525
    @iamriyas3525 2 года назад +4

    For better experience listen in 0.75x😅

  • @sivadharshan1235
    @sivadharshan1235 Год назад

    The best explanation bro. Thanks a lot!

  • @Dc_tech386
    @Dc_tech386 2 года назад

    Question do I have to use a film capacitor why can’t electrical capacitor use

  • @jodysschoolchannel967
    @jodysschoolchannel967 2 года назад +1

    Question: At 3:15, you say that the inductor begins to act as a current source. I don't understand why that would be the case, here. At the point where the lines coming from D1 and D2 connect, directly before the inductor, the "push" is in the same direction. If this is the case, why would the inductor (and the capacitor) change their polarity?

  • @bhuvaneshwarivijayarangan7421
    @bhuvaneshwarivijayarangan7421 2 года назад

    Which software you will use to draw the circuit diagram

  • @LittleChamp206
    @LittleChamp206 3 года назад

    U said inductor is decaying when D2 is on ...but u should the current nature charging in wave forms
    Second question ...incase if the mode of both switch is not present ...then the inductor current keeps increasing according to the wave form u gave ...
    My third question is what is the impact of core flux reset.
    Why the emf is not induced in the second half of the primary circuit

  • @mohamadzamani9561
    @mohamadzamani9561 2 года назад

    What about output voltage equation ?

  • @yerramsettirohith3823
    @yerramsettirohith3823 3 года назад

    from which you have given explaination like IEEE or journal paper can you please say the name of paper or can you please share the links of the paper

  • @jarrahoyen148
    @jarrahoyen148 Год назад

    set playback to .8 and you'll be able to follow

  • @alagarkrishna96
    @alagarkrishna96 4 года назад

    Does this require snubber Circuit??

    • @ElectronicsMaddy
      @ElectronicsMaddy  4 года назад +1

      Yes for practical implementation we need to have snubber circuits.

  • @GregoriousApartment
    @GregoriousApartment 3 года назад

    Really great❤️💯

  • @splfunnylogs7086
    @splfunnylogs7086 2 месяца назад

    Kindly check the mode-1 primary and mode 2 primary... It's reversed actually

  • @alagarkrishna96
    @alagarkrishna96 4 года назад

    Very good ❤️❤️