I'm building a small fishing boat in my shop right now. I got the main sides and bottom together and started to seal it. I decided to try poor mans fiber glass (canvas and waterproof wood glue) and I'm really impressed how it turns out. I thought I'd have to use atleast three coats to get it thick enough to work. Well after sanding the first coat and applying the second coat yesterday, this stuff is good as fiberglass. I'm glad I did spend the extra money and headache with fiberglass. After sanding this coat, I'll be ready for paint!
Certainly gives me confidence in the boat I want to build! I especially like that you didn't try some crazy splicing of the bottom sheets. I want more rigidity so I plan to do two layers of ply and not overlapping the seems. Have you used fiberglass before? It'll be my first time.
I was watching da vid and saw aggressor docked a the harbor I was like this is definitely Chuuk Lagoon Kapongs and nice built to travel around da lagoon. God bless 🤙🏽
I would have filled the hollowed parts with spray foam for extra safety so the boat doesn't sink if it ever got damaged, than you could save it and fix it
what is the putty applied to the outside of the boat before painting after fiberglass and epoxy resin? at 4:56 you begin applying it but don't show what it is.
@@fishingbear5538 i used body filler to flatten the surface then paint it with epoxy primer before finishing it with rust-olium marine coating boat boat bottom paint.😊
that boat cut through that water like a knife! nice reebok strip on the side lol i see some pressure treated lumber in there but why not the whole boat?? other q's are those screws stainless and are they self tapping?? i would worry because that looks like a hefty screw adn so many of them going through that thin strip looks like 1x2 or less. other than that you built the "sh$$" out of that boat!
i had no idea i could just build a boat like that ! definitely gonna build my own 😁🤙
Kreatif mantap pas buat mancing atw santai2 di laut cri2 pemandangan. sukses mantap 😀😀😀
I'm building a small fishing boat in my shop right now. I got the main sides and bottom together and started to seal it. I decided to try poor mans fiber glass (canvas and waterproof wood glue) and I'm really impressed how it turns out. I thought I'd have to use atleast three coats to get it thick enough to work. Well after sanding the first coat and applying the second coat yesterday, this stuff is good as fiberglass. I'm glad I did spend the extra money and headache with fiberglass.
After sanding this coat, I'll be ready for paint!
❤ 👏 such a great educational video… proves that everything learned must be passed on ❤
That is a really cool looking boat. Congratulations.
Certainly gives me confidence in the boat I want to build! I especially like that you didn't try some crazy splicing of the bottom sheets. I want more rigidity so I plan to do two layers of ply and not overlapping the seems. Have you used fiberglass before? It'll be my first time.
I was watching da vid and saw aggressor docked a the harbor I was like this is definitely Chuuk Lagoon Kapongs and nice built to travel around da lagoon.
God bless 🤙🏽
Thank you!
I am from 🇵🇭ph.
Working here in Weno Chuuk.❤️
Love the music
Nice work
Belo barco parabéns!!!
I would have filled the hollowed parts with spray foam for extra safety so the boat doesn't sink if it ever got damaged, than you could save it and fix it
now that is some good advice. i would add also make the whole boat with pressure treated lumber not just part of it
@@djkingpersiais that normal to do though? Use that lumber
what is the putty applied to the outside of the boat before painting after fiberglass and epoxy resin? at 4:56 you begin applying it but don't show what it is.
Body filler
And marine boat bottom paint.
@@craftsmantv7205 Thank you. I am going to be attempt the boat build.
any question... navigate in salt whater?
Any plans for this? Great video 👌
he looked at his Available hardware and materials and made a Plan!
Can I get the plans?
Very good
Muito top meu amigo.
1:45 is that also 1/4” plywood? Does it just bend naturally like that or did you steam it before placing it there?
Yes ..that’s 1/4”plywood.
No steaming.
I just split it together in the middle both sides after joining the end.
Love from Technical Assam
Nice 👍
how much is the engine price?
Hello, awsome lookin boat congragulations:)) i want to ask is it possible to get plans or something like that?
Is that marine ply ?
Nice! What speed with merc 5 ?
that thing looks really small but the speed that thing is going is incredible. might even be a 2.5. the only reason it can go that fast is the v hull
Hello my friend, can you tell me the thickness of the plywood used, I would be grateful ☺️
@@AhmadAbdo-ik8ew 1/4”inch
@@AhmadAbdo-ik8ew 1/4” inch
Hola como se llama la tela impermeabilizante que le aplico. Y si la consigo en colombia como se llama gracias
how much resin is used?
What’s the weight and dimensions?
The width is 46inch and 13feet long.it weighs 75klg.without a motor.😊
Gud day idol, can I ask the length, width of the bottom and side size. And also thickness of the plywood. Thanks for the reply.
@@woodenjetski6187 lenght is more than 13feet.and width is 46inch, bottom40inch .plywood 1/4”
Плоское дно даёт о себе знать😊
Interesting. What is the lenght and the weight of the boat (without outboard motor etc)?
15feet and the weight is 80klg
Fiber glass layer how much required
Best guess, looked like 2.
How long does it take the ply to damage?
what was the stuff you put over the fibreglass?
Body filler
Is it just a normal body filler or specialise for marine grade?
Did you just freestyle the build or did you follow some plans?
Yes..i dont use plans cause its only flat bottom
What is the name of clothing that use in this boat 🚢
fibreglass?
What's the resin?
Evercoat marine
@@craftsmantv7205 And what is the white stuff before you paint it? And what kind of paint were you using?
@@fishingbear5538 i used body filler to flatten the surface then paint it with epoxy primer before finishing it with rust-olium marine coating boat boat bottom paint.😊
@@craftsmantv7205 You're awesome, dude!
can i get the measurements?
that boat cut through that water like a knife! nice reebok strip on the side lol i see some pressure treated lumber in there but why not the whole boat?? other q's are those screws stainless and are they self tapping?? i would worry because that looks like a hefty screw adn so many of them going through that thin strip looks like 1x2 or less. other than that you built the "sh$$" out of that boat!
Bonjour vous vendez 😢❤ ? Je voudrais me faire le même serait-il possible d'avoir les plan de chaque pièce avec les mesure s'il vous plaît ❤
Below the boat needed a V shape to cut the waves
What did he use after he fiberglasses it BONDO??????
Tinggi sisi sampingnya berapa?
Les prise de vue concernant la pose de résine epoxy sont médiocres.
Floating dog house
Que carajo mostraste?
Hardly a how to video
Bad af