Hello, i am currently building a wind turbine using an ac motor , but it turns too slow.. so i plan to put a voltage doubler into it, but i wander :- 1) half wave vs full wave doubler better ? 2) doubler with rectifier will output more power...? Pls someone advice me... cheers...
Sir i used transformer of 12 volt.For that I used capacitor of 100 microfarad 12 volts.But you used capacitor of 100 microfarad for 6 volt transformer.Please tell me the capacitor value which I used for my 12 volt transformer is correct,or should I use less than that or greater than that
Hai @nethravathy you can use the 100 microfarad capacitor. But the voltage rating of the capacitor should be 2 times or 3 times the input voltage for voltage doubler and tripler respectively. also the higher the value of capacitor the output will be stable with higher loads
Actually my point is, Is it useful like boost converter If yes, give marks out of 100 Example, Boost converter 90 vtg multiplier 10-30 Means, If I want to run 12 v motor on 3.7 lithium cell Is it durable, safe
Thank you. 💫
Really helpful bro❤
Bgm ozhivaakkaamaayirunnu..
Hello, i am currently building a wind turbine using an ac motor , but it turns too slow.. so i plan to put a voltage doubler into it,
but i wander :-
1) half wave vs full wave doubler better ?
2) doubler with rectifier will output more power...?
Pls someone advice me... cheers...
Ee bgm onn ozhivakane🙏🏻
Its is easy to understand tq sir
You're most welcome
Sir i used transformer of 12 volt.For that I used capacitor of 100 microfarad 12 volts.But you used capacitor of 100 microfarad for 6 volt transformer.Please tell me the capacitor value which I used for my 12 volt transformer is correct,or should I use less than that or greater than that
Hai @nethravathy you can use the 100 microfarad capacitor. But the voltage rating of the capacitor should be 2 times or 3 times the input voltage for voltage doubler and tripler respectively. also the higher the value of capacitor the output will be stable with higher loads
Tq❤
very good
Super sir
Sir , can you tell me
Voltage drop
When you attached load ,
Which circut doubler or tripler
@@MeTech-ELECTRONICS any one or both
According to your comfort
Approximately 0.3 - 0.6 V drop at 1K load
Actually my point is,
Is it useful like boost converter
If yes, give marks out of 100
Example,
Boost converter 90
vtg multiplier 10-30
Means, If I want to run 12 v motor on 3.7 lithium cell
Is it durable, safe
@@MeTech-ELECTRONICS please answer
6input output 18 how it doubles
It's a tripler circuit the 6V input is multiplied 3 time. By storing the voltage in the capacitor and then discharging it
Enta Lab Exam Rakshicha Daibame ❤️
Thanks for watching and don't forget to like share and subscribe
Nice
Thanks
Sir plz make vedio in English
Which language?
This is in malayalam