I am using Ryobi 3 speed impact wrench and it works fine for most DIY auto works. But actually, for most general maintenance, even 3/8 impact wrench w/ 100 ft-lbs power was good enough. I usually start with this, and when this thing cannot do something, I bring out a bigger one. Still, if anybody is buying just one for the auto work, probably that Ridgid one in the video is the best, considering the price.
Kyong Song I started with a Ryobi but I found it struggled on some tasks. It did OK with lug nuts and some suspension components. If you can afford a bit more money, spend it on something with a torque rate between 450-600. That way you’re futureproof.
@@Paul-vn5mi you know what? Ive never considered this. Rust can be a huge Factor. Althought anytime i notice rust on any bolts im working i soak em in penetrating fluid and let em soak for a while before o start my project. This really helped me when i removed my tranny 2 years ago. I rather wait 2 hours and let them soak than deal with broken or rounded off bolts
*I like the features of the LED light on both the drill and the **MyBest.Tools** . I also like the contractor bag where I carry drill bits and driver attachments. So far the batteries hold charges to my satisfaction.*
You sold me! I ordered one today. Home Depot is running a deal for these impact wrenches online only right now for $149 including a battery and charger. Since this will be my first Ridgid power tool, that’s a match for my needs. Thanks, guys! 👍🏻👍🏻
Thanks for the advice folks ! A tip, if you are trying to remove a rusty/dirty bolt (with or without impact wrench), don't be temted to remove it all the way in one go! You are gonna fill the treads with more rust this way, resulting in breaking the bolt. Try to treat the bolt as if U were putting new threads on. Little left, little right, little left, little right and so on, and spray some penetrating fluid. Have fun repairing cars folks!
Thank you for a brilliant comment. I am a DIY RUclips Watching Mechanic (IT Tech by trade) and I have been pulling teeth trying to figure out where to throw my 500 bucks (Air Compressor, Cordless, or Corded)
I already had a range of Ridgid tools, and lots of batteries, so it made sense to go with the Ridgid 1/2 inch impact. I haven't been disappointed with it's performance so far. Even around the garage where I have access to compressed air and my air impact, not having to work around the air hose is certainly convenient.
My Ridgid impact wrench is the brushed Gen 4. It is a great multi-purpose, middle-of-the road, tool with plenty of torque and plenty of power for most job. I use it for changing and rotating tires, removing large bolts from things like engine mounts, and I use it a lot removing small engines. Like I said, it's great. The best thing about it is that it doesn't eat up a lot of battery power. I can rotate the tires on several cars with a 4.0 Ah battery and still have plenty of power for several more. One of these days, I'll move up to the Gen 5 brushless.
So many haters with no experience with this tool. Sorry to say it ladies, but Ridgid has been knocking the median range brushless tool market out of the park lately. They may not always score at the very top of the list. Yet you usually see them in the top 3 for power or features. I have this tool and the 5ah battery and can testify to what Workshop Addict has to say here. Even with the proof shown right here in this video of the brushless impact doing a complete break down right before your eyes, some red, green and grey fanboys aren't willing to accept the fact that Ridgid is stepping up their game in big ways. Let it go about the previous gen Ridgids and that 1st gen brushless hammerdrill already. Even that tool has been upgraded already. Make way for the orange brand fellas. Some tools dont have to be 2x's the price to get the job done. #teamridgid
Ridgid is a DIY tool, meant for non-pro level work...it’s a fine tool if that’s what you need. If you make a living w/your tools you need better (ie, Dewalt, Milwaukee, Makita)
Agreed J Rob. Yet I've been noticing a lot of Gen5x out at jobsites. It's still mostly Dewalt - then Milwaukee - then Makita, but 1 outta 10 Ive seen some orange.
J. Rob. Rigid is actualy a Professional grade tool.... Home use are Ryobi and Craftsman etc... Rigid makes tons of tools. I preffer Milwaukee but I will give Rigid credit when it is deserved.. M18 is killing the brushless market...
I love my Ridgid Gen5x 1/2" impact. If you are on the fence about buying just do it. No regrets. broke loose my seized caliper pins when I couldnt fit a cheater bar in. Handles everything I throw at it with no issues whatsoever.
@@dabneyoffermein595 Yes a ridgid or milwaulkee 3/8 impact make about 250 ft-lbs of torque, thats more than enough to bust lug nuts no problem. A normal lugnut put on properly should be no more than 100 ft-lbs torqued. Just make sure you look at the torque rating on the impact. ridgid makes 2 different 3/8 drive impacts. The normal only makes 100 and the sub compact makes 225.
@@bri9435 how much does the Milwaukee Stubby M12 3/8" torque down to (what's it rated at) , say for lugs , would it be enough? i think most cars call for 80 lbs of torque on lugs (correct?) I believe I read that on one of my cars
just bought a harbor frieght 1/2inch "20v" brushless compact wrench with the smallest/lighest battery they sold. i tested in the parking log on my lognuts and they came right off, so i kept it. i did the same test on the ryboi compact and it couldnt get lug nuts off so it went back same day. my harbor frieght is super light and rated for 550ftlbs of removing and maybe 350 for tightening
I have this tool and I gotta say they are spot on with this video this is the 1st impact I would recommend buying it was my 1st impact it done everything I've asked it to do on my suspension tire rotations brakes work on my 1ton dodge dually and my wife mazda and it never let me down its worth the money and my number one go to tool to use if you buy this i recommend buying the 6 amp hour Octane battery They make this impact in octane version now And it is awesome with the 6 amp hour battery this tool can run thur a battery so thats why I recommend the 6 amp hour battery for this tool I have the 6 amp hour battery and the performance with it vs 4 or 2 anp hour battery dont even compared
I went today and bought one of these just because of this review. I already had a ridgid drill with 2 1.5 hr batteries so it was a no brainer at $149! Down the road I may upgrade the battery but I will see how it does for a while.
Thank you so much for this review and recommendation! It really helped out a newbie like me to the world of impact wrenches. My first impact wrench will be the Ridgid 18-Volt GEN5X Cordless Brushless 1/2 in. Impact Wrench. Thanks again!
I like all of what they have said. What I do not like is putting a particular 'brand' into my head. Not to say that there are not brands to stay away from.
I just bought this I was really surprised how well it works for the price. The main reason I went with it I already had other rigid tools. I’m happy with it.
Great video guys. I couldn't agree more. I won this very impact from you months ago. I don't use it very often but when I do it's been fantastic. Using it in the yard where I don't have power available makes the battery extremely useful. And there is plenty of power. Thanks again.
I bought this impact based on the last time you posted this video and I love it. I already had the ridgid drill so the battery interchange made it even more economical!
@@joseflores-ot6yl this was 3 years ago and I have to say I already wore it out and while Home Depot claims a lifetime warranty it is hard to do a claim. I have started to switch to Milwaukee now. While the initial cost is a little more I feel the quality is much better. I don’t know the model number of the ridgid impact.
Yup, but fun fact... Ryobi, Milwaukee, AEG are all owned by the same parent company TTi. Ridgid is pretty much a licensed rebranding of AEG power tools for the USA. So they are sister brands and probably contain a lot of shared technology.
Thanks, this vid was really helpful. I've been thinking about buy an impact wrench to do some minor work on my car, but didn't know how to choose an impact wrench. So, I've been putting it off. Now I can buy with confidence. Thanks for the info.
I have been a tool dealer for 34 years. Makita bar none is the best. I know its pretty much the most expensive, except for snap on wanto be dewalt/black n decker. My makita is 15 years old, I use it everyday, especially right now. It loves the new batteries. Never, never has let me down. I even had to rip it apart agian, to clean it up. Clean out the electric trigger and whola back to killing it. I have the female 1/4 model, I use 1/4 3/8 and 1/2 adpaters. I recently rebuilt my 12 valve with it. It pulls injectors out no problem and wheels off a tahoe. Makita is the best period. I have owned and I sell all of them. Except snap on now. I left snappy 18 years ago to make double the money on my own. Have a nice day.
I would buy dewalt dcf899 witch is cheaper and I already have the battry for it and I know it works 100% on every bolts big or small as it has 3 power setting price wise and power wise recommended
Video is 5yrs+ old and it answer my questions. New to the impact world cause I thought I was a real man hahahaha straining my muscles and cramping up on them super tight bolts and nuts. Hahahaha no I was just acting broke not buying them cause I’d rarely use them but I’m seeing the light now and enjoying tearing about my vehicles learning more and more. I was looking for answers on if you bought a monster impact for minor bolts what would happen and now I understand. Thanks.
For the Aussies watching this check out Katana 1/2 impact wrench made by kinchrome. $200 for the full kit. 400nm which I'd say if more like 380nm. I've had mine for 2yrs working in a brake and suspension specialist and I've had no problems. Also comes with 3yr warranty or add another 3yr by registering it on there website. For a diy'er it's absolutely brilliant! And you'll notice no one sells them used bcoz they're a great gun. Check them out. They don't have the power of Milwaukee high torque but 380nm will get most jobs done. It loosens the 325nm axle nuts on my car within 2 seconds.
Does the Octane batteries really give it a boost? I'm looking to add a bigger for my tools. Was thinking about the Octane line up, but wasn't sure if it worth it over the regular batteries
RIGID vs. DEWALT? im looking for a 3/8 drive for just general lug nuts, brakes and lawnmower. I don't think I need a 1/2" unless you think I should start there? I can get the unit, two batteries and charger at Home Deport for 230 USD, is that a good price? (DEWALT)
@@dabneyoffermein595 I had a lot of bad experience with dewalt I been happy and their LSA is no joke I used it a lot I had tools replaced batteries I love ridgid line I stopped with dewalt when they denied warranty for something that was under warranty and had reciept I’ll never use dewalt ever again
I have a Bosch Core 18v freak hybrid impact driver/wrench and it's a fantastic tool for anything up to 19mm but when getting to axle bolts or other 20mm+ bolts, it pretty much taps out. Battery life is amazing though and it has honestly been my favorite tool despite its limitations.
@@Amokof Wow this was a while ago. I gotta say for what it's worth, the Milwaukee 2767 1/2" has replaced this as my go-to impact. My Bosch gathers dust now. I can't recommend the Milwaukee enough.
You said "the everyday guy". There are everyday gals of which I am one. I am looking for an impact wrench to take off lug nuts if ever I get a flat tire again I had to take off a tire once and it was a nightmare. Thank God a man and his son came along and helped me. So based on your review I will go out and get this one. Will take advantage of the Black Friday sale.
Sorry Rose. I know how that feels and it is not nice. I catch myself saying hey guys in my videos often and I do not mean it that way, but it is not right.
I don't know what tool you used probably the standard 4 sided tire thing, if that's the case maybe look at a breaker bar, with some cheap tire sockets. The downside of batteries is that they slowly loose charge overtime.
Seeing you guys tear apart a Jeep gives some hope, I'm up in the rust belt and my jeep is hell to work on sometimes. I have other Ridgid products and they haven't failed me yet even starting out as an apprentice, been debating between this and the Milwaukee fuel just wasn't sure the Ridgid would have the power
This video shows the Ridgid slightly beating out the Milwuakee "MID-TORQUE CORDLESS IMPACTS FOR AUTO TECHS" on RUclips ruclips.net/video/D4fyfjo7-Wk/видео.html
I just ordered this from Home Depot to remove 21mm brake caliper bracket bolts. I was not able to remove the bolts using a hammer or wedging a big screw driver between the wrench and the strut. And I only had a 12 point deep wall non-impact socket. I also ordered a 6 point shallow 21mm socket - hope that helps as well. Will report back, but I think this is an actual/good use case for the Ridgid.
I continue to be impressed with Rigid brand tools ! I currently don't have one of these larger battery powered impact wrenchs, but this one looks like a winner.!Send it on over Brian! I'm still waiting to win something !
Try using kano kroil penetrant liquid on the rusted and stubborn bolts, it penetrate rusted and loosen bolts100% of the the time. All ways spray bolts 1 hour before.. I work on a large industrial plant and this is what gets the job done. I have 31 year of experience and I know what works and what doesn't.
Nice video. As you know Ridgid is AEG(German of course) here in Europe,nice machine,not cheap. But have an Kielder(British brand) and i'm very happy with it. Strong enough(700nm) for my diy automotive-work (Ford Mondeo), but..no led light,so i use an external lamp. No big problem. For working on bigger cars like in the US/Canada, Ridgid,Milwaukee,Dewalt,Ingersollrand is a better choice i guess.
You should put the product link in the description for stuff like this, it would make it easier for the viewer to find and you guys get to make some cash with each purchase made.
The impact extension is probably not made for use on coolant, and fluids so on so forth. The chrome was meant for that but not meant to be impacted on. The impact version is better overall but could cause it to corrode.
We use our impacts, impact sockets and extension in coolant, brake fluid and almost any other fluid you can imagine and they still look great. Impact sockets are made of a metal with more chrome in it for strength so they do not rust as easy.
Unfortunately for Canadians ridgid isn't as competitively priced up here. That impact wrench is $170 bare tool plus tax. For just over $200 you can get a Dewalt. Ridgid makes nice stuff but it always boils down too what batteries you already have. Good review as always!
I have been looking into a 1/2 impact and was looking at Milwaukee! I already have the ridgid gen4 drill/driver and 1/4 impact. After this I know what I'm going to get. Yeah the Milwaukee is better but there is no point since I already have the ridgid platform and I'm just a DIY guy. I would like to see ridgid come out with cordless rachets.
If I were starting over I think rigid represents the best value on the market. That said, I disagree a bit on this one (I haven't used/tested nearly as many as you & respect that this is your opinion based on your use of a lot of the popular brands out there). I think the best impact is the one you already have a battery system for. I've got the ryobi 1/2" & it does most of what I need, has lights (not a separate switch ... that does look really handy) & I already had a metric crap-ton of batteries for it. Is anyone making a stubby cordless that you guys know about? Thanks for another great video.
WorkshopAddict good news...just saw some Milwaukee dog & pony show. 3/8 & 1/2 stubby m12 250ft-lb ... coming never to my home depot...but I've got the internet:) Yay M12
And now it's still great, even better... If you do need more power, you can get a new OCTANE battery for this exact same wrench and boost the torque by nearly 50%.
We love the Milwaukee Mid-Torque! It was not in this video because we felt it was a bit more expensive and more advanced than what people buying their first impact would need. I like that way you think and your tools!
I just happen to have every 1/2 impact from milwaukee but also have a lot of there tools thats why I stay with them. I do have a few makita they seem to do well also.
I was going to go with the Ridgid, but got the Milwaukee mid torque on clearance for the same price so went that route since in on both platforms, love that thing but still may pick this up for the road box.
We use an IR 1/4" for small stuff, The Ridgid Gen5X and Milwaukee Mid-Torque for most and pull out the Gen 2 for the tough stuff. We love the lightweight, small and powerful stuff for our main use. But we have a ton invested in tools and we use them daily. Not everyone wants to or needs to invest that much. You have to buy what you are happy with.
Just picked one up at Home Depot but I have no idea what I am walking into. I couldn’t remove a 36mm nut from the front sprocket on my Tiger 800 motorcycle with a 2 ft breaker bar so I headed over to Home Depot. I got a 2A battery with a charger and this wrench because I know brushless is better for reliability. That being said, it’s rare that I need to remove large bolts. Anyhow, I am afraid of over tightening the nut with this wrench. If I set it to auto will it tighten it to the proper torque or should I just use my torque wrench. I think it’s definitely over 100 ft lbs as I did my sisters Ninja 300 a week ago and that was 96ft lbs and I did it with a 2 ft breaker bar and had my sister put all her weight on the bike so I wouldn’t keep lifting the bike off the stand.
Thanks for bringing this wrench to my attention 👍 Just returned the dewalt tool only wrench ($149) because it was underpowered (300ft lb) for my f150s lug nuts. Maybe the ridgid will be enough. Plus I get the battery and entry into ridgid tools 😊 Sadly my local Home Depot’s don’t stock this combo, but at $149 for the wrench and battery worth ordering it.
Man u guys are sponsored by rigid heavy lmfaoo. Best three impacts are milwaukee, dewalt, and makita. No specific order but dewalt’s new atomic driver is currently number 1 followed by milwaukee, then makita.
Can you guys please take a look at some brushless combo sets? Maybe the RIDGID 18-Volt GEN5X Lithium-Ion Brushless 5-Piece Combo Kit that runs $399.99. Would love to see a comparison between a couple of different combo sets.
One more question... I have a Ridgid 1/4 Impact (Driver) I have used a socket adapter to accept socket bits. I tested smaller bolts like 10mm etc and it cracks them off no problem. Do you recommend I continue to use this method, or use the 1/2 inch impact (WRENCH) to remove these smaller bolts?
the funny thing is... about any reasonable tool and technique will remove bolts from a nice, clean vehicle like this. How about a nice rusty Wisconsin car with 180,000 miles on it?
I have a bolt on my mx5 that attaches the thermostat housing to the engine. it`s in a very awkward position due to the housing itself and I already snapped a 1/4 inch swivel joint trying to undo it. I wonder if a 1/2 inch impact could undo it or it would just strip and still be on the engine. Any advice from the youtube mechanics?
When i work on my car i mostly use hand tools and i'm ok with that but i would love an impact wrench for axle nuts, crank bolt, suspension and some of those nasty exhaust bolts. I have a charger and batteries for DeWALT so i can save money by buying the tool only. I would prefer a mid size impact but i'm afraid DCF894 won't be enough . At the same time i'm reluctant to buy the big DCF899 - it may be an overkill. Do you know if DeWALT is coming out with a new impact soon?
I am impressed with how this works. I did put the Ridgid to the maximum "RUclips test" aka the Honda crankshaft bolt. The Ridgid didn't cut it, but Milwaukee instantly broke it. Is there a good impact for a Honda crank pulley bolt for a affordable price?
The Ridgid lineup is lacking a 3/8 drive impact and cordless ratchets. If you want a limited number of battery platforms, and you want more than one 1/2 impact, then Ridgid is not for you.
Brian and Jeff working hands automotive here again you guys are the G.O.A.T IN AUTOMOTIVE INDUSTRY LOVE YOU GUYS. Which impact wrench would you recommend? The ridgid or the milwaukee? #workshopaddictfan
As you know I'm the Milwaukee man in my city (Memphis Tn) and I love Milwaukee I have the m12 fuel 3/8 impact wrench, m18 fuel 3/8 impact wrench, m12 fuel 3/8,1/4, and 1/2 ratchet and my favorite 2763-20 my big dick BANANA HAMMOCK (in my snap on junkie voice) lol love that guy too. So out of that line up would you say that the ridgid would cut the use of those tools in half? Cuz that ridgid looks nice if it's what you say it is I'll buy it just want you guys opinion thanks #workshopaddictfan
Hey guys, I know very little about cars but I have to put a trailer hitch on the back of my jeep. I have the part itself and the install looks fairly easy. I have both a ryobi hand held drill and a Milwaukee impact drill. I went to home depot today but they directed me and I ended up with the wrong bit. Do I need an attachment (to originally plug into the drill) and then also a hex socket that would attach onto that to be able to use my impact drill to put the bolt onto the hitch and through the car? Meaning I need to buy two pieces.
Yes, You would need a 1/4" Hex to 1/2" square drive. But I will tell you that your impact driver does not have the power needed to get those bolts as tight as they will need to be. Tighten them by hand after.
I'm a DYI'er and looking for an impact wrench driver. Not sure if I'll have more need for a 1/4" or 3/8" or 1/2" impact sized driver in the future and don't want to buy 2-3 different sized drivers. Is it possible to go from 1/2" to 3/8" to 1/2" and vice versa by just using a socket attachment adaptor instead no matter which drive size I get? thx
If you had to choose between the 1/4 or 3/8 stubby milwaukee for under hood work, from intakes to engine mounts, which would you choose? BTW, I checked and the 3/8 is only 3 oz heavier.
So, for me, I would not use the same tool on intakes as I would engine mounts. In general, a 3/8" will do more under the hood, but I find a 1/4" more useful.
Thank You guys for a great video. I was wondering is their a reason the impact would twice your hand? I have had a ryobi wrench with the One+ really twice me hand and hurt me really bad. My understanding is that this shouldn’t happen but happened to me and has me really paranoid. Any advice
In 1961, it introduced the first cordless electric drill, powered by a nickel-cadmium battery. Meanwhile, Black + Decker contracted with Martin Marietta to design tools for NASA, including a zero-impact wrench that turned bolts without spinning the astronaut.
Is a barttery or air compressor power impact gun better for 3/4" drive sockets and up. If it a air compressor how big do I go. What impact would be the best. I heard snap on is but there was to damn much
I am using Ryobi 3 speed impact wrench and it works fine for most DIY auto works.
But actually, for most general maintenance, even 3/8 impact wrench w/ 100 ft-lbs power was good enough.
I usually start with this, and when this thing cannot do something, I bring out a bigger one.
Still, if anybody is buying just one for the auto work, probably that Ridgid one in the video is the best, considering the price.
Kyong Song I wish I noticed the $99 deal for the ryobi a few months ago. Now it’s $138 online
Kyong Song I started with a Ryobi but I found it struggled on some tasks. It did OK with lug nuts and some suspension components. If you can afford a bit more money, spend it on something with a torque rate between 450-600. That way you’re futureproof.
I have the ryobi 3 speed impact wrench.hasnt let me down yet.. Although i have the 6.0 amp batterry so it really gives it some extra boost.
Gabriel Frias you must be in an area with lots of sun and no rust lol.
@@Paul-vn5mi you know what? Ive never considered this. Rust can be a huge Factor. Althought anytime i notice rust on any bolts im working i soak em in penetrating fluid and let em soak for a while before o start my project. This really helped me when i removed my tranny 2 years ago. I rather wait 2 hours and let them soak than deal with broken or rounded off bolts
*I like the features of the LED light on both the drill and the **MyBest.Tools** . I also like the contractor bag where I carry drill bits and driver attachments. So far the batteries hold charges to my satisfaction.*
We just bought the rigid Gen. 5 1/2 inch impact. Rated at 485 ft-lbs Fastening torque & 620 breakaway torque. Awesome wrench! 👍
I had the Milwaukee in my cart, about to spend $400 and this came across my notifications. So thanks for saving me money.
You sold me! I ordered one today. Home Depot is running a deal for these impact wrenches online only right now for $149 including a battery and charger. Since this will be my first Ridgid power tool, that’s a match for my needs. Thanks, guys! 👍🏻👍🏻
Thanks for the advice folks !
A tip, if you are trying to remove a rusty/dirty bolt (with or without impact wrench), don't be temted to remove it all the way in one go! You are gonna fill the treads with more rust this way, resulting in breaking the bolt. Try to treat the bolt as if U were putting new threads on. Little left, little right, little left, little right and so on, and spray some penetrating fluid. Have fun repairing cars folks!
Thank you for a brilliant comment. I am a DIY RUclips Watching Mechanic (IT Tech by trade) and I have been pulling teeth trying to figure out where to throw my 500 bucks (Air Compressor, Cordless, or Corded)
Just in case people don't know. Rigid, Milwaukee, and Ryobi are all owned by the same company
Monopolies... Not good thing.
but they arent all built the same
@@bentech8887 This This and This! Owned by the same company doesn't mean shit if Milwaukee gets the best of the best and then Cryobi and Rigid don't.
Made by the same company, not owned.
You mean all built to fail?
I already had a range of Ridgid tools, and lots of batteries, so it made sense to go with the Ridgid 1/2 inch impact. I haven't been disappointed with it's performance so far. Even around the garage where I have access to compressed air and my air impact, not having to work around the air hose is certainly convenient.
Makes me want to go out in the garage and tear my car apart! Great video guys!
I want to do that after my first cup of coffee each day. :)
My Ridgid impact wrench is the brushed Gen 4. It is a great multi-purpose, middle-of-the road, tool with plenty of torque and plenty of power for most job. I use it for changing and rotating tires, removing large bolts from things like engine mounts, and I use it a lot removing small engines. Like I said, it's great. The best thing about it is that it doesn't eat up a lot of battery power. I can rotate the tires on several cars with a 4.0 Ah battery and still have plenty of power for several more. One of these days, I'll move up to the Gen 5 brushless.
So many haters with no experience with this tool. Sorry to say it ladies, but Ridgid has been knocking the median range brushless tool market out of the park lately. They may not always score at the very top of the list. Yet you usually see them in the top 3 for power or features. I have this tool and the 5ah battery and can testify to what Workshop Addict has to say here. Even with the proof shown right here in this video of the brushless impact doing a complete break down right before your eyes, some red, green and grey fanboys aren't willing to accept the fact that Ridgid is stepping up their game in big ways. Let it go about the previous gen Ridgids and that 1st gen brushless hammerdrill already. Even that tool has been upgraded already. Make way for the orange brand fellas. Some tools dont have to be 2x's the price to get the job done. #teamridgid
Yes Sir! The Ridgid makes a great tool for a guy who is working on these items at home! We see a lot in the field also.
The mid torqu Rigid is good. I do find the M18 lineup better though.
Ridgid is a DIY tool, meant for non-pro level work...it’s a fine tool if that’s what you need. If you make a living w/your tools you need better (ie, Dewalt, Milwaukee, Makita)
Agreed J Rob. Yet I've been noticing a lot of Gen5x out at jobsites. It's still mostly Dewalt - then Milwaukee - then Makita, but 1 outta 10 Ive seen some orange.
J. Rob. Rigid is actualy a Professional grade tool.... Home use are Ryobi and Craftsman etc... Rigid makes tons of tools. I preffer Milwaukee but I will give Rigid credit when it is deserved.. M18 is killing the brushless market...
my girlfriend got me this last christmas and i absolutely love it, im going to get the high torque this holiday season.
Right on!
How did you like it? I ened up doing the same thing
I love my Ridgid Gen5x 1/2" impact. If you are on the fence about buying just do it. No regrets. broke loose my seized caliper pins when I couldnt fit a cheater bar in. Handles everything I throw at it with no issues whatsoever.
what about if i started with a 3/8" drive? for lugs , general brakes work, and lawnmower maint. ? you think I'd be good?
@@dabneyoffermein595 Yes a ridgid or milwaulkee 3/8 impact make about 250 ft-lbs of torque, thats more than enough to bust lug nuts no problem. A normal lugnut put on properly should be no more than 100 ft-lbs torqued. Just make sure you look at the torque rating on the impact. ridgid makes 2 different 3/8 drive impacts. The normal only makes 100 and the sub compact makes 225.
@@dabneyoffermein595 www.homedepot. .ca/product/ridgid-18v-brushless-sub-compact-cordless-3-8-inch-impact-wrench-tool-only-with-belt-clip/1001528347
@@dabneyoffermein595 there is a link to the sub compact
@@bri9435 how much does the Milwaukee Stubby M12 3/8" torque down to (what's it rated at) , say for lugs , would it be enough? i think most cars call for 80 lbs of torque on lugs (correct?) I believe I read that on one of my cars
just bought a harbor frieght 1/2inch "20v" brushless compact wrench with the smallest/lighest battery they sold. i tested in the parking log on my lognuts and they came right off, so i kept it. i did the same test on the ryboi compact and it couldnt get lug nuts off so it went back same day.
my harbor frieght is super light and rated for 550ftlbs of removing and maybe 350 for tightening
Which one did you buy?
@@richguev its blue, i think hercules 20v
I have this tool and I gotta say they are spot on with this video this is the 1st impact I would recommend buying it was my 1st impact it done everything I've asked it to do on my suspension tire rotations brakes work on my 1ton dodge dually and my wife mazda and it never let me down its worth the money and my number one go to tool to use if you buy this i recommend buying the 6 amp hour Octane battery They make this impact in octane version now And it is awesome with the 6 amp hour battery this tool can run thur a battery so thats why I recommend the 6 amp hour battery for this tool I have the 6 amp hour battery and the performance with it vs 4 or 2 anp hour battery dont even compared
I went today and bought one of these just because of this review. I already had a ridgid drill with 2 1.5 hr batteries so it was a no brainer at $149! Down the road I may upgrade the battery but I will see how it does for a while.
Glad we could help. Let us and everyone else know how you like it. You will see more power out of the larger batteries.
how did you like it
Thank you so much for this review and recommendation! It really helped out a newbie like me to the world of impact wrenches. My first impact wrench will be the Ridgid 18-Volt GEN5X Cordless Brushless 1/2 in. Impact Wrench. Thanks again!
I like all of what they have said. What I do not like is putting a particular 'brand' into my head. Not to say that there are not brands to stay away from.
I just bought this I was really surprised how well it works for the price. The main reason I went with it I already had other rigid tools. I’m happy with it.
This is hands down the best video for an impact wrench.
This and Singlecam's review sold millions of these
U are right, small , compact tool; big job, big tool. Nothing is univeral
Great video guys. I couldn't agree more. I won this very impact from you months ago. I don't use it very often but when I do it's been fantastic. Using it in the yard where I don't have power available makes the battery extremely useful. And there is plenty of power. Thanks again.
you guys made great points, there is no need for the biggest and baddest high torque monsters, if 99% of the job doesn't require them!
Most of the time we used this Ridgid Impact on level 2
That 1% is a b!+@# 😁
LOL. But, if you are a DIY guy, and that is who this video is directed at, do you put money into that 1% or do you heat it up and use a breaker bar?
WorkshopAddict aaahh the big red wrench lol :)
rdlc321 that's when u grab the 3/8 ratchet or qtr in impact.
I bought this impact based on the last time you posted this video and I love it. I already had the ridgid drill so the battery interchange made it even more economical!
what's the model number for this one? i want to get one, this video made me decide to go buy my first Ridgid tool
@@joseflores-ot6yl this was 3 years ago and I have to say I already wore it out and while Home Depot claims a lifetime warranty it is hard to do a claim. I have started to switch to Milwaukee now. While the initial cost is a little more I feel the quality is much better. I don’t know the model number of the ridgid impact.
It's interesting to see brands such as Rigid and Ryobi stepping up their game and producing some very nice high quality tools.
Yup, but fun fact... Ryobi, Milwaukee, AEG are all owned by the same parent company TTi. Ridgid is pretty much a licensed rebranding of AEG power tools for the USA. So they are sister brands and probably contain a lot of shared technology.
Thanks, this vid was really helpful. I've been thinking about buy an impact wrench to do some minor work on my car, but didn't know
how to choose an impact wrench. So, I've been putting it off. Now I can buy with confidence. Thanks for the info.
you guys just saved me about 60 bucks and got me more power! thank you!
I have been a tool dealer for 34 years. Makita bar none is the best. I know its pretty much the most expensive, except for snap on wanto be dewalt/black n decker. My makita is 15 years old, I use it everyday, especially right now. It loves the new batteries. Never, never has let me down. I even had to rip it apart agian, to clean it up. Clean out the electric trigger and whola back to killing it. I have the female 1/4 model, I use 1/4 3/8 and 1/2 adpaters. I recently rebuilt my 12 valve with it. It pulls injectors out no problem and wheels off a tahoe. Makita is the best period. I have owned and I sell all of them. Except snap on now. I left snappy 18 years ago to make double the money on my own. Have a nice day.
I would buy dewalt dcf899 witch is cheaper and I already have the battry for it and I know it works 100% on every bolts big or small as it has 3 power setting price wise and power wise recommended
Video is 5yrs+ old and it answer my questions. New to the impact world cause I thought I was a real man hahahaha straining my muscles and cramping up on them super tight bolts and nuts. Hahahaha no I was just acting broke not buying them cause I’d rarely use them but I’m seeing the light now and enjoying tearing about my vehicles learning more and more.
I was looking for answers on if you bought a monster impact for minor bolts what would happen and now I understand. Thanks.
3:06 I love how perfectly the Gatorade bottle is in view through the hole under the car loll
Man, working under a car with rust and dirt, I'd be wearing protective eye wear. Can't replace those puppies.
Yup.
For the Aussies watching this check out Katana 1/2 impact wrench made by kinchrome. $200 for the full kit. 400nm which I'd say if more like 380nm. I've had mine for 2yrs working in a brake and suspension specialist and I've had no problems. Also comes with 3yr warranty or add another 3yr by registering it on there website. For a diy'er it's absolutely brilliant! And you'll notice no one sells them used bcoz they're a great gun. Check them out. They don't have the power of Milwaukee high torque but 380nm will get most jobs done. It loosens the 325nm axle nuts on my car within 2 seconds.
I love my ridgid brushless 3 speed impact wrench it is powerful I use the octane batteries and it’s a monster
Does the Octane batteries really give it a boost? I'm looking to add a bigger for my tools. Was thinking about the Octane line up, but wasn't sure if it worth it over the regular batteries
RIGID vs. DEWALT? im looking for a 3/8 drive for just general lug nuts, brakes and lawnmower. I don't think I need a 1/2" unless you think I should start there? I can get the unit, two batteries and charger at Home Deport for 230 USD, is that a good price? (DEWALT)
@@dabneyoffermein595 I had a lot of bad experience with dewalt I been happy and their LSA is no joke I used it a lot I had tools replaced batteries I love ridgid line I stopped with dewalt when they denied warranty for something that was under warranty and had reciept I’ll never use dewalt ever again
I have a Bosch Core 18v freak hybrid impact driver/wrench and it's a fantastic tool for anything up to 19mm but when getting to axle bolts or other 20mm+ bolts, it pretty much taps out. Battery life is amazing though and it has honestly been my favorite tool despite its limitations.
Im glad i came across this comment, ive been considering getting one for my dad’s birthday
@@Amokof Wow this was a while ago. I gotta say for what it's worth, the Milwaukee 2767 1/2" has replaced this as my go-to impact. My Bosch gathers dust now. I can't recommend the Milwaukee enough.
@@alex_thecarguy Damn that sucks to hear. Guess I gotta go with the Milwaukee. I appreciate your reply.
You said "the everyday guy". There are everyday gals of which I am one. I am looking for an impact wrench to take off lug nuts if ever I get a flat tire again I had to take off a tire once and it was a nightmare. Thank God a man and his son came along and helped me. So based on your review I will go out and get this one. Will take advantage of the Black Friday sale.
Sorry Rose. I know how that feels and it is not nice. I catch myself saying hey guys in my videos often and I do not mean it that way, but it is not right.
I don't know what tool you used probably the standard 4 sided tire thing, if that's the case maybe look at a breaker bar, with some cheap tire sockets. The downside of batteries is that they slowly loose charge overtime.
Hey, this video was really helpful and well done. Thanks.
Seeing you guys tear apart a Jeep gives some hope, I'm up in the rust belt and my jeep is hell to work on sometimes. I have other Ridgid products and they haven't failed me yet even starting out as an apprentice, been debating between this and the Milwaukee fuel just wasn't sure the Ridgid would have the power
The Milwaukee mid torque does have more power. For DIY work, the Ridgid is awesome. If you are doing more than DIY, go Milwaukee.
Yea i understand i wasnt trying to come to you in a bad way . But would suggest milwaukee to any diy and love your channel by the way
I will go with the Milwaukee but it's purely based on having other tools that share the same batteries and chargers.
Totally makes sense, the mid-torque is awesome!
This video shows the Ridgid slightly beating out the Milwuakee
"MID-TORQUE CORDLESS IMPACTS FOR AUTO TECHS" on RUclips
ruclips.net/video/D4fyfjo7-Wk/видео.html
I just ordered this from Home Depot to remove 21mm brake caliper bracket bolts. I was not able to remove the bolts using a hammer or wedging a big screw driver between the wrench and the strut. And I only had a 12 point deep wall non-impact socket. I also ordered a 6 point shallow 21mm socket - hope that helps as well. Will report back, but I think this is an actual/good use case for the Ridgid.
It should have no problem with that. Why is it so tight?
Bought this because of this video! Next question. What type of impact sockets should I go with? Will Harbor Freight impact sockets be ok?
Yes, they will be fine. I still have a set of HF sockets from 15 years ago and they work like new.
@@WorkshopAddict Thank you!
Another great video thanks for putting out quality and informative reviews have a blessed day
I continue to be impressed with Rigid brand tools ! I currently don't have one of these larger battery powered impact wrenchs, but this one looks like a winner.!Send it on over Brian! I'm still waiting to win something !
Email me!
Try using kano kroil penetrant liquid on the rusted and stubborn bolts, it penetrate rusted and loosen bolts100% of the the time. All ways spray bolts 1 hour before.. I work on a large industrial plant and this is what gets the job done. I have 31 year of experience and I know what works and what doesn't.
I'm using the M18 fuel and M12 fuel impacts. I really like the M12 Fuel 3/8 stubby because it has that autoshutoff mode.
Nice video. As you know Ridgid is AEG(German of course) here in Europe,nice machine,not cheap. But have an Kielder(British brand) and i'm very happy with it. Strong enough(700nm) for my diy automotive-work (Ford Mondeo), but..no led light,so i use an external lamp. No big problem.
For working on bigger cars like in the US/Canada, Ridgid,Milwaukee,Dewalt,Ingersollrand is a better choice i guess.
You should put the product link in the description for stuff like this, it would make it easier for the viewer to find and you guys get to make some cash with each purchase made.
The impact extension is probably not made for use on coolant, and fluids so on so forth. The chrome was meant for that but not meant to be impacted on. The impact version is better overall but could cause it to corrode.
We use our impacts, impact sockets and extension in coolant, brake fluid and almost any other fluid you can imagine and they still look great. Impact sockets are made of a metal with more chrome in it for strength so they do not rust as easy.
Thanks guys....good video!
I want to buy one for my guy, and this looks like a good torque wrench 😊.
It's a good impact wrench!
Unfortunately for Canadians ridgid isn't as competitively priced up here. That impact wrench is $170 bare tool plus tax. For just over $200 you can get a Dewalt. Ridgid makes nice stuff but it always boils down too what batteries you already have. Good review as always!
JR Rustic DIY That takes away the price advantage for sure!
Thanks! I’m actually looking to get one. This helps make my decision
Ridgid needs compact 3/8 be great! Love my gen5x 1/2
I keep looking around for a 3/8 but don't look like they will ever make one. I just use my impact driver for the smaller stuff
@@wblake22 www.homedepot.com/p/RIDGID-18-Volt-SubCompact-Lithium-Ion-Cordless-Brushless-3-8-in-Impact-Wrench-Tool-Only-with-Belt-Clip-R87207B/312620593
This is hugely helpful...thanks so much!
Thank you buddy I appreciate it very educational
Good review. Please turn Jeffs' microphone up to the same volume as yours, he's a little soft spoken. Thx
I have been looking into a 1/2 impact and was looking at Milwaukee! I already have the ridgid gen4 drill/driver and 1/4 impact. After this I know what I'm going to get. Yeah the Milwaukee is better but there is no point since I already have the ridgid platform and I'm just a DIY guy. I would like to see ridgid come out with cordless rachets.
We too would like to see cordless ratchets in the Octane platform.
If I were starting over I think rigid represents the best value on the market. That said, I disagree a bit on this one (I haven't used/tested nearly as many as you & respect that this is your opinion based on your use of a lot of the popular brands out there). I think the best impact is the one you already have a battery system for. I've got the ryobi 1/2" & it does most of what I need, has lights (not a separate switch ... that does look really handy) & I already had a metric crap-ton of batteries for it.
Is anyone making a stubby cordless that you guys know about? Thanks for another great video.
No stubby that I know of, just right angles. This video was for the person who does not have an impact wrench already.
WorkshopAddict good news...just saw some Milwaukee dog & pony show. 3/8 & 1/2 stubby m12 250ft-lb ... coming never to my home depot...but I've got the internet:) Yay M12
Great review guys! Already in route to pick this up. Excellent review.
Thanks for this review, Im in the market for an impact gun and this is a strong audition haha.
And now it's still great, even better... If you do need more power, you can get a new OCTANE battery for this exact same wrench and boost the torque by nearly 50%.
I use the Milwaukee mid torque on the daily, once in a while I need to bring out big nasty Milwaukee high torque one key.
We love the Milwaukee Mid-Torque! It was not in this video because we felt it was a bit more expensive and more advanced than what people buying their first impact would need. I like that way you think and your tools!
I just happen to have every 1/2 impact from milwaukee but also have a lot of there tools thats why I stay with them. I do have a few makita they seem to do well also.
Milwaukee is awesome! Thay make a Mid-torque that is one of our favorite tools! But they are a step up from the first time DIY buyer.
WorkshopAddict yea they just seem to be a good tool and we have a lot of them. But i see some cannot afford them but we chose to go with them.
Great video, but think im gona opt for the milwaukee 3/8 stubby👍
I'd say this or the milwaukee midtorque are the best for automotive diy
Yes, we 100 percent agree. Price is what makes the Ridgid stand out.
I was going to go with the Ridgid, but got the Milwaukee mid torque on clearance for the same price so went that route since in on both platforms, love that thing but still may pick this up for the road box.
Qtr in impact driver for smaller things, gen 2 high torque for the rest.
We use an IR 1/4" for small stuff, The Ridgid Gen5X and Milwaukee Mid-Torque for most and pull out the Gen 2 for the tough stuff. We love the lightweight, small and powerful stuff for our main use. But we have a ton invested in tools and we use them daily. Not everyone wants to or needs to invest that much. You have to buy what you are happy with.
Rigid is also life warranty which makes it worth the price.. Thank you (*L*)
Just picked one up at Home Depot but I have no idea what I am walking into. I couldn’t remove a 36mm nut from the front sprocket on my Tiger 800 motorcycle with a 2 ft breaker bar so I headed over to Home Depot. I got a 2A battery with a charger and this wrench because I know brushless is better for reliability. That being said, it’s rare that I need to remove large bolts. Anyhow, I am afraid of over tightening the nut with this wrench. If I set it to auto will it tighten it to the proper torque or should I just use my torque wrench. I think it’s definitely over 100 ft lbs as I did my sisters Ninja 300 a week ago and that was 96ft lbs and I did it with a 2 ft breaker bar and had my sister put all her weight on the bike so I wouldn’t keep lifting the bike off the stand.
You always need a torque wrench. Auto just snugs up the nut and leaves it ready for you to tighten.
Nice Dirty Harry quote... "You've got to know your limitations" :-)
I prefer "It's amazing what you can do when you don't know what you can't do."
I need a battery platform that I can use the batteries for everything. Impact wrench, drill, weed wacker, lawnmower and blower.
Right now, Dewalt would be your only choice.
Thanks for bringing this wrench to my attention 👍 Just returned the dewalt tool only wrench ($149) because it was underpowered (300ft lb) for my f150s lug nuts. Maybe the ridgid will be enough. Plus I get the battery and entry into ridgid tools 😊
Sadly my local Home Depot’s don’t stock this combo, but at $149 for the wrench and battery worth ordering it.
Did you get the 1/2 dewlt? The xr? I have an f150 looking to get the dewalt for lugs
Christian honestly don’t remember the model, the ridgid has more torque though.
Man u guys are sponsored by rigid heavy lmfaoo.
Best three impacts are milwaukee, dewalt, and makita. No specific order but dewalt’s new atomic driver is currently number 1 followed by milwaukee, then makita.
Can you guys please take a look at some brushless combo sets? Maybe the RIDGID
18-Volt GEN5X Lithium-Ion Brushless 5-Piece Combo Kit that runs $399.99. Would love to see a comparison between a couple of different combo sets.
Looking at them as a value or compare power?
I think value, $399 kit vs. $599 or $699 kit from one of the top three. (Prefer brushless kit). I think that would be cool.
We will look into it and see what we can do. That will be a good, but long video!
THANKS! That would be great! Break it up into 3 seperate videos to maximize views.
What about the ingersol rand 3/8 w5132? 500+ breakaway.... nice power adjusting knob.... and best light ever put onto a cordless?!?!?
Absolutly love that Impact Wrench! But it is NOT DIY Priced!
just bought a set today !!!!!!!!!!!!
One more question... I have a Ridgid 1/4 Impact (Driver) I have used a socket adapter to accept socket bits. I tested smaller bolts like 10mm etc and it cracks them off no problem. Do you recommend I continue to use this method, or use the 1/2 inch impact (WRENCH) to remove these smaller bolts?
Your method is just fine for small bolts.
@@WorkshopAddict Thanks again for the quick replies!
Would this be a good Impact for a Beginner for Tires rotation struts An oil change and Breaks and other things under the car or trucks
Thanks a lot for your great video.
Greetings from Pakistan 🇵🇰👍
My 1/2in Rigid can’t take the bolts off my skid plate let alone a lug nut
the funny thing is... about any reasonable tool and technique will remove bolts from a nice, clean vehicle like this. How about a nice rusty Wisconsin car with 180,000 miles on it?
Is it strong enough to take out harmonic balancer bolt?
First I’m going to the brothel down the street then to the garage it’s a tear down day bois
I have a bolt on my mx5 that attaches the thermostat housing to the engine. it`s in a very awkward position due to the housing itself and I already snapped a 1/4 inch swivel joint trying to undo it. I wonder if a 1/2 inch impact could undo it or it would just strip and still be on the engine. Any advice from the youtube mechanics?
When i work on my car i mostly use hand tools and i'm ok with that but i would love an impact wrench for axle nuts, crank bolt, suspension and some of those nasty exhaust bolts. I have a charger and batteries for DeWALT so i can save money by buying the tool only. I would prefer a mid size impact but i'm afraid DCF894 won't be enough . At the same time i'm reluctant to buy the big DCF899 - it may be an overkill.
Do you know if DeWALT is coming out with a new impact soon?
I do not know if they are. Dewalt should be as they are behind times with impacts right now!
I am impressed with how this works. I did put the Ridgid to the maximum "RUclips test" aka the Honda crankshaft bolt. The Ridgid didn't cut it, but Milwaukee instantly broke it. Is there a good impact for a Honda crank pulley bolt for a affordable price?
Late reply but the new ryobi high torque does the job for me at a very good bargain of a price especially on that Honda crank bolt 😂
How did you make the molded tool trays for the toolbox?
The Ridgid lineup is lacking a 3/8 drive impact and cordless ratchets. If you want a limited number of battery platforms, and you want more than one 1/2 impact, then Ridgid is not for you.
That is very true.
The only rigid impacts I see a 250 ft/lbs of torque where are you getting 450?
Whick socket set do you recommend along with the ridgid 1/2. For basic automotive tasks. Inch, Metric, standard, deep common size range? Thank you
This would be what I would recomend! amzn.to/2ZqwDNs
Will it take off a Honda axle nut?
Brian and Jeff working hands automotive here again you guys are the G.O.A.T IN AUTOMOTIVE INDUSTRY LOVE YOU GUYS. Which impact wrench would you recommend? The ridgid or the milwaukee? #workshopaddictfan
As you know I'm the Milwaukee man in my city (Memphis Tn) and I love Milwaukee I have the m12 fuel 3/8 impact wrench, m18 fuel 3/8 impact wrench, m12 fuel 3/8,1/4, and 1/2 ratchet and my favorite 2763-20 my big dick BANANA HAMMOCK (in my snap on junkie voice) lol love that guy too. So out of that line up would you say that the ridgid would cut the use of those tools in half? Cuz that ridgid looks nice if it's what you say it is I'll buy it just want you guys opinion thanks #workshopaddictfan
This video was not meant for you. This video was for the first time buyer of an impact wrench. The Milwaukee Mid-Torque would be perfect for you.
Thanks guys very glad to know I was debating should I get it and you just confirmed it for me. THANK YOU
Hey guys,
I know very little about cars but I have to put a trailer hitch on the back of my jeep. I have the part itself and the install looks fairly easy. I have both a ryobi hand held drill and a Milwaukee impact drill. I went to home depot today but they directed me and I ended up with the wrong bit.
Do I need an attachment (to originally plug into the drill) and then also a hex socket that would attach onto that to be able to use my impact drill to put the bolt onto the hitch and through the car? Meaning I need to buy two pieces.
Yes, You would need a 1/4" Hex to 1/2" square drive. But I will tell you that your impact driver does not have the power needed to get those bolts as tight as they will need to be. Tighten them by hand after.
Is there a link to this impact?!
I'm a DYI'er and looking for an impact wrench driver. Not sure if I'll have more need for a 1/4" or 3/8" or 1/2" impact sized driver in the future and don't want to buy 2-3 different sized drivers. Is it possible to go from 1/2" to 3/8" to 1/2" and vice versa by just using a socket attachment adaptor instead no matter which drive size I get? thx
If you had to choose between the 1/4 or 3/8 stubby milwaukee for under hood work, from intakes to engine mounts, which would you choose? BTW, I checked and the 3/8 is only 3 oz heavier.
So, for me, I would not use the same tool on intakes as I would engine mounts. In general, a 3/8" will do more under the hood, but I find a 1/4" more useful.
Thank You guys for a great video. I was wondering is their a reason the impact would twice your hand? I have had a ryobi wrench with the One+ really twice me hand and hurt me really bad. My understanding is that this shouldn’t happen but happened to me and has me really paranoid. Any advice
Should not twist your hand
In 1961, it introduced the first cordless electric drill, powered by a nickel-cadmium battery. Meanwhile, Black + Decker contracted with Martin Marietta to design tools for NASA, including a zero-impact wrench that turned bolts without spinning the astronaut.
I have ryobi, they only have 1 wrench
So i want a much more compact one, still 1/2
Which brand should i bet on?
Milwaukee if you want really small.
Get the Milwaukee stubby it comes in a 1/2 inch anval in very compact and powerful
Love Milwaukee onekey impact wrenches, Never tried Rigid impacts.
Milwaukee HAS MANY great impact wrenches! They would normally be purchased by someone who is doing a bit more than just home DIY.
Is a barttery or air compressor power impact gun better for 3/4" drive sockets and up. If it a air compressor how big do I go. What impact would be the best. I heard snap on is but there was to damn much