For those asking the specs on some components, the diagram at 0:12:00 says: R1 = 1KΩ R2 = 220Ω R3 = 220Ω R13 = 220Ω RRes = 2KΩ RDG1 = 2KΩ RD1 = 1KΩ I believe the capacitors are 22pF
Dear i made Temperature controller with Atmega 328P chip and install it on my aquarium it work best but some time if i on off some 220V light or i hv small water 220V 25 watt and air pump 220V 5 watt, controller hanged or restart i tried to use 104 filter cap and some other but no effect can u plz give me some hind. Thanks.
probably no. I would say using cable is much better if you want to have diaplay. PCBs are only for microcontroler+sensor+Power voltage in. Other than that, you should connect with cables.
Does the Altium software generate the layers automatically ? Let say you have to connect pin A to pin B but there is a component in the way. Does it automatically generate a layer and connect A to B through a via connection? I've never used a PCB designer software and to me it seems so tedious having to deal with the connection between layers.
For those asking the specs on some components, the diagram at 0:12:00 says:
R1 = 1KΩ
R2 = 220Ω
R3 = 220Ω
R13 = 220Ω
RRes = 2KΩ
RDG1 = 2KΩ
RD1 = 1KΩ
I believe the capacitors are 22pF
Thanks for this. How's the bootloading done to the ATmega? Can this be done through the FTDI too?
Thank You So much Sir
You made a video of how to make an arduino board
It is very helpful to me
Once again thank you
Atmega's bootloader is done through FTDI too?
Dear i made Temperature controller with Atmega 328P chip and install it on my aquarium it work best but some time if i on off some 220V light or i hv small water 220V 25 watt and air pump 220V 5 watt, controller hanged or restart i tried to use 104 filter cap and some other but no effect can u plz give me some hind. Thanks.
specify in details the components of the board how much capacitor , resistors etc and theirs values we are noob we need much details
thank you
Can you pls share the schematics and the Gerber files?
Sir can I use any other microcantroler
what are the values of the capacitors
hello, which is the value of the programmer capacitor?
Great video sir. I just have one question : does it work with a LCD display ?
probably no. I would say using cable is much better if you want to have diaplay. PCBs are only for microcontroler+sensor+Power voltage in. Other than that, you should connect with cables.
Does the Altium software generate the layers automatically ?
Let say you have to connect pin A to pin B but there is a component in the way.
Does it automatically generate a layer and connect A to B through a via connection?
I've never used a PCB designer software and to me it seems so tedious having to deal with the connection between layers.
No idea
Is this support pwm analog read and write??
Will any problem when i use my own pcb shape
Wow
Please I meed help 😢
Cir-cute nahi hota mery bhai…. Sarcit (circuit) hota hay… 😂