Awesome Homemade Lathe Bed Ready To Work
HTML-код
- Опубликовано: 26 авг 2024
- #homemadelathe #mrranyhomemade #diylathebed
Awesome Homemade Lathe Bed Ready To Work
New projects homemade lathes bed (second lathe)
Hello RUclipsr, today I’m glad to share my new second homemade lathes.
I do happy to make a bigger size because my first lathe the size is a bit small, when milling a big plate of thick metal is not easy because the length is not enough space to milling than the plate metal I used is thin most are 10 mm thick.
So I decided to make a new lathe bigger than the previous lathe. Now there is enough experience to make a new lathe also.
I hope you all enjoying my new lathe from part 1.
• #Diy #Craft #Tools Do ...
• Homemade Lathe Machine...
• Awesome Cutting slider...
• #homemadecuttingslider...
Dear all beloved fans and subscribers,
Welcome to my channel Mr.Rany Homehome.
Today, I have new video about:
I would like to show you how to make local furniture made of steal, iron, wooden products. Hope you enjoy watching my activity.
-Awesome ideas
-Tips
-Craft
-How to make
-Create Ideas
-DIY
-Life Hack
-Others
Please help me to like, comment,share and subscribe my channel to reach my goal 100,000 subscribers.
With regards
Mr.Rany Homemade
That's one fine shiny lathe bed.. great to see your progress
Thanks for your comments I do hope you enjoyed my homemade now my next step is the table support body lathe. Because I take time to look at the gear rack, especially its pinion because different teeth very poor my place never have any tools as want if I found over prices.
I am never disappointed to see your videos may the lord bless you and your family.
Thank you for your support and my handy work I do hope you enjoyed it. I do apologize for my posting never in time because I did it by hand.
Stop apologising - 😁
As a trained and experienced machine tool fitter/turner, then I can say your doing a good job with limited tools - BRAVO.
My advice is not to fall into a perception trap, where your ideas are limited by what manufacturer's /others do..
Golden rule 1- PREP ALL WELDS remove millscale/bevel...
No2 - NEVER machine and then weld/fabricate.
No3 - ALL metals are pre stressed(flame cutting, hot/cold roll forming..... De-stress(normalise) as best you can(heat soak metal in a controlled fire pit...).
❤️👍
Thank you for reaching
I will try me best to develop step by step
Glad you found a rack and pinion for your lathe bed carriage. I would probably try to clean the pinion gear, maybe soak it in a baking soda solution, then scrub scrub scrub until it travels along the rack smoothly. Both parts will probably need a chemical bath. If you must replace one or the other there is a simple formula to give you a tooth count that will work if you change gear diameters.
Thank you, my dear friend. I'm so happy with my homemade lathe bed and carriage very nice and contact I can see how is the weight of the carriage cross slider and compound cider and tool post total 76kg but when I push it it feel like 4 or 5kg that is amazing otherwise no shack between rail and carriage. Tomorrow I will build a table to support the lathe body.
I really appreciate your recommendation.
I am still looking pinion for the gear rack because pinion teeth to tight.
@@mr.ranyhomemade2466 yep if your bed is sliding along with a 1/10 force to weight ratio you've done well my friend!
And good luck, I hope you find one soon! Not sure how a rack and pinion from a vehicle steering system would work but may be worth looking into
My problem is doesn't know the name of each tool lathe
Rack and.gear looks to be metric/imperial mix, but if they mesh OK, then set up a.saddle bracket arrangement, wth a shaft to carry the gear and lap the rack and gear with waste abrasive particles and thick oil. - pull rack back and forth while adjusting the height of the saddle clamp jig.
You'll get very high precision and super smooth action..
Incrivel como você esta contruindo essa maquina!
O resultado esta ficando como um torno industrial!
Para quem constroi seus proprios projetos, sabe o quanto é dificel ter bons resultados!
Parabéns você faz isso parecer facil!
Nice showing up
Thank you so much my dear friend
Good job Mr. Rany! Keep it up!
Thanks my friend
Now I'm making a table support lathe body .
The final...😊😊
Thank you
Well done 🎉
Thanks for your comments I do hope you enjoyed my homemade now my next step is table support body lathe.
fantastic job. Your workmanship is superior. Bravo. You are surely a very talented young man.. can't wait to see you turning and making chips. take your time. There is no hurry. Thanks for the great video. Kimber
Thank you, Mr. Kimber
I will try my best to continue this project.
Seem to slow because I do not know the kind of tools and size of the gear.
I do learn a lot from you too. This project take so long because I did by hand.
😲 wow! Brilliant,,. Really nice love the idea with the oil and marking chalk to show the high spots, you gave very ingenious and creative techniques and I'm going to use them in my future projects. And your the captain of 😎 cool
Thanks for your information I appreciated it been my work hard many problems in this project. This time I was finished but I had to develop step by step. Now health not good I stopped a month go I hope I can get back soon.
I thought my workshop very poor everything I made most by hand because my place very poor is not easy t find out.
Thanks
Bodia amigo parabéns pelo trabalho que Deus abesoi
You are doing a amazing job very talented thanks for sharing your lathe build
Thank you for your comment! I do hope you enjoy it, I will try my best and it will be finished someday. Now I’m making a table support lathe body because now it is really heavy. I can’t move. So I will upload soon
Well done , great job !
some people say double V bed is better than single V or flat as the wear is more even and self-centering....but requires more precision to get both V's perfectly in same plane. Flat is the most economical version in terms of repair, but wears more.
Thank you my friend for introduced I appreciate. Seem to late for me I knew both the best I hope Iand will try my best
Thanks 🙏🙏🙏
Не закаленная сталь по не закаленной стали будут задиры при первой же нагрузке. Надо обязательно делать накладки из хороших пар скольжения.
Great work dude 😄😄
Thank you for your comment! I do hope you enjoy it, I will try my best and it will be finished someday. Now I’m making a table support lathe body because now it is really heavy. I can’t move
Show Amigo Parabéns
Olá meu amigo!!!
O projeto esta fantástico , e muito bem elaborado, parabéns!!!
Abraço e boa sorte sempre!!!
Olá, meu amigo!!!
como vai? funcionou tão bem, mas meu problema é que ferramentas e equipamentos para continuar a seguir parecem lentos porque aqui não há esse tipo de coisa
Thank you
What is the power of the electric motor?
2horsepower
you will overcome them and that comes against you.
Thanks I will try 🙏💪
SHAHJAHAN Ali
Topi de mais
🦾👍🏻👍🏻👍🏻🌼🌼🎉
passion for the lathe profession, congratulations on the video❤🇧🇷😉👍 subscribed 👏👏👏👏👏👏👏 "@arduinomaquinas" thanks you