Troubleshooting (fixing?) a Pioneer PD-S503 Part I of ?
HTML-код
- Опубликовано: 24 авг 2024
- The quick diagnostics of a newly arrived "inverted" CD player.
Please support my work: ewbbt.eu/portf...
Take a look at my retro electronics shop here: ewbbt.eu/
Thanks for posting this. I found it extremely useful. I've got the same symptoms on a Pioneer PD - S502. Not the same unit obviously, but there are similarities and you're video saved me time. Cheers.
I was getting ready to try and fault find an old PD S507 that wouldn't start. Turns out, from your video, the cd has to be placed uside-down. i would never have thought of that, never seen it on any other player. Thanks!
Thank you, a very useful video for me. I knew there was something missing but didn't know what it was, when you flipped the laser assembly over I noticed immediately that I had a spring missing which holds those two geared racks in place, very useful. Now I just need to find a spring.
Thank you for the video, very useful. I'm trying to repair a Pioneer S-602 that I bought to try my luck at repairing. Also stable platter, the exact same symptoms, and indeed, no lens!
This is rather frequent, as it seems.
After that it often needs optics ajustment, I'm preparing a video about it (nothing that you won't find in service manual, though...)
Correcto amigo, si el laser no lee, no hay rotación del disco, tuve una falla así con un AIWA y era el lector óptico, lo remplacé y listo empezó a funcionar correctamente.
SALUTE. I have same problem with my PIONEER -no spinning, but lens is OK. Have to try this servo testing. Maybe it helps? THANX.
Hi, please check if all the voltages are ok.
The second thing is to check the tray end switch, it may think the tray is still open.
The third thing is to check the spindle motor wiring, the motor itself or its drivers rarely go bad from my experience.
@@sirrosh69 OK. Tray end switch is ok (tested). Workin´ on it. THANX.
I have several Pioneer CD players. Some from Japan, models PD-T05 PD-t06 similar to model to PD-75 and PD-77.. They all have the same issue, the lens fall out of the laser block. I guess the glue they used to attach the lens looses it's adhesion over time..
Exactly, but in my case some extensive tuning is needed, because the outer tracks are being read unreliable sometimes. That's far out of scope of works for this device as it is not so valuable to waste time tuning laser pickup.
@@sirrosh69 HI .. Yes.. but in my case the decks I own are all hi-end. I was fortunate to find a local shop that repairs CD players. I would like to see them repaired, rather than tossed in the garbage..
@@doughowdy7009 Well... words "Pioneer" and "high-end" are found on completely different chapters of my vocabulary. In fact they never met ;)
@@sirrosh69 Here is my deck being serviced ruclips.net/video/XwiyS4FVUbM/видео.html
@@doughowdy7009 Thanks for sharing, nice channel!
Yeah, that's one of the procedures from the service manual. Judging by the oscillogram I saw, you pickup is rather weak... or needs further tuning, IMHO.
Anyway, enjoy your music and your device!
I had a Pioneer PD-S504 CD Player, and the same problem happened. A friend of mine repaired the player with gluing the lense, but a few time later, the lense fell again. I was disgusted as I did really appreciate this player (matched with a DENON PMA 360 that I still have) but today when I see the cost of Pioneer laser unit fot this model, it does hurt...
It is not a problem to glue it again, just be carefull with the lens itself. As I mentioned in the comments, cyanacrylic glue will do the job and it has ~10yrs lifespan, so it's something else that will fail next time, not the glue :)
Is it possible to see an 'eye' effect on RF signal with this Velleman HPS10?
Of course not, this is only a small single channel tester, which can tell only if there's a signal at all)))
My favorite signal analysing insrument happened to be this one: ruclips.net/video/UdIgmA3utp4/видео.html
I´d tryed that test, but when i pushed PGM does´nt sound any click...?PLAY button is clicking.There`s some other problem...?
The button may be a bit dirty or stuck (does the display say "TRACK?" on pressing PGM?).
But that looks to be a secondary problem, because this player won't even go from STANDBY to ON if it would have any of the button shorted (IR remote aside, I'm speaking of the front panel buttons here).
Help. I have a pd65 was working fine then i shut off the cd player with drawer open now it won't power on at all??? HELP!!!!
Hi, my guess that it's a mere coincidence. What kind of help do you expect here?
If you feel confident - open it and try to diagnose, starting from the power source... which is to be the main suspect when something's not powering on.
Hi. I wonder how the story ends.
Me too)))
It works really fine up until the ~70 minute of a disk, then it _may_ be a bit skippy. I'm preparing the last part where I'll do the optical pickup tuning. In the service manual they say you need the special test CD, but I discovered that any optical medium with amplitude modulation (CD-R, it is) and filled up to the end will do the job.
So stay tuned!)))
@@sirrosh69 I watched your video because I have the same problem. Bought a cassette and CD player. The cassettes work, but the problem is with the disc player - I pressed the tray of boards to pull out and the lens neatly lies there. I can not return the seller, I will try to repair it.
sorry for my english, i use a translator
@@mastermakc1 You bought the same CD player model, right?
Same as my pd-6500
Hi there. exact is happeninf to mt Pioneer pd201.
Yeah, seems like a very frequent case...
Когда продолжение?
А я думал, не интересно никому ;)
Осталась юстировка оптики...
@@sirrosh69 мне тоже предстоит это делать, поэтому интересно)
@@vetal2312 значит будет мне стимул ;)
Вобщем-то делал для себя, и все руки не доходили. Не так много дисков имеют данные за 60 минут, а именно там и начинают проявляться ошибки в моем случае.
У меня не всегда выезжает лоток, подскажите в чем причина?
pioneer pd-s703
I need a lens for mine. Does anyone know where I can get one. ?
Second hand is the only possible chioce, I think.
Hi Alex, I tried to do a test mode on a PIONEER PD-M406 but I can't seem to get the unit powered up again. Any suggestions?
Hi, that's strange... It should be reversable.
I never had a PD-M406 on my bench, not sure how to deal with it.
Sorry for not being helpful ;)
To Val Mina : if you touch wrong wires, you could have burned the fuse and the unit will no longer power up. Check if you have 5V coming out of the power section. If not, then look for the fuse. It can be a chip type (looks like a small transistor, but has only 2 legs (ICP Nxx). Good lukc
I was recently was recently given a Pd s501 rarely ever used. Stopped working on me and is making a squealing/ whining noise. Could this be related to a fallen off or loose lens? Have seen the same problem on other youtube videos but no answer. Would be a shame to toss it as it came with a matching tuner and amp. Any info much appreciated. Thanks people!
Hi Peter, try to check if the disk is rotating. If it is - that's not your case.
Only rotating ever so slightly when I try to start playing a disc gives out two sounds like as if it's trying to read something then gives in. It's very reluctant to open up as well, takes like 10 seconds to think about it before opening up. Thanks for your help!
@@brrrt6666 May be a transport problem as well, hard to tell. Find a good local technician and he'll sort it out for sure. (People think I'm not so good one as they commented below ;)
Might have to... was hoping to fix it for cheap. You're a legend though!
@@brrrt6666 Sure! Among my 20 subscribers :)