My god, if only I had the artistic ability to do half of this shit that I imagine and think of. There’s so much but watching these videos gets me pumped to keep learning. I still gotta get some models and get them built. I grew up putting together Car models ever since I was like 6 or 7 is when I started and I’m 29 now. I lost a lot of them one hurricane season here in Florida when we got hit with 2 back to back hurricanes. We lost EVERYTHING. The house stood but it was basically re-done the entire inside. Furniture gone, all of my old toys, transformers, old hot wheels which come to find out my parents kept and cleaned them and surprised me back about 2 years ago, but if I had all of my car models I did, I would probably be sitting at like 30 models, granted you can tell a 7 year old did it but as time went on I got better and better. I wish I still had them to display, but I got 6 of my dad’s old ones he never got to do so I think that I’m gonna break out the airbrush kit and me and him can set aside a weekend to do a set each.
I'm sorry to hear that man, can't imagine all my work gone in just one night, that will be painful! Wish you guys have fun for every build in the future!
fantasticccc....cheers from Mexico! How do you keep your gundam in one pice in that same position= how do you glue the parts of the model? how to keep my gundam in a posse?
Thanks man! Maybe the gundam is fresh build out of the box so the joints are tight enough, but if anything goes wrong I did prepared some 3 seconds glue to fill it into the joints, just make sure that's the correct pose we need and it's all good. Cheers!
This is literally inspired me to do a diorama myself however you have to ask yourself on the dusting side of things how well will that keep on the wall well the answer is not so well naturally dusting can help but with all the little organic looking bits and Bobs like trees and cotton only get so far. .... deep shadow box or a good Hutch
nice. only critique I have, is your vines. they still look wire-ish. reverse wrap them in 10mm masking tape (so, sticky side out, and 10mm works best as its a crooked/wiry piece), then roll/cover them in fine grain dust (hobby store), spray with alcohol/glue mix, and paint whatever colour you'd like. works a treat.
The magnet is surprisingly strong, but to maintain the pose i recommend using glue on those joints to make it permanent, also i did use some glue on the mace to support the upperpart of barbatos.
Thank you for this step by step diorama. Just when I look for city diorama, it's a very good source of inspiration, and tutorial. I will not do it in a wall mount, but more classical, but still, it helps a lot.
I am impressed with your work, although I accept the negative comments, but the planning of the work from the name is very informative. Another highlight of the work itself is the effect of breaking through the building. It's good. I'm not very good at English. If you can't understand it, all in all, I like your work. It's very good.
this is my favourite of all your builds so far. that building background is PRIME!! well done. though now i'm staring at my plain Barbaros and judging him for being such a disappointment.
Amazing work and result as always I think it would be cool to see a hgce Strike Freedom Gundam wall build because it’s one of many peoples favorite Gundams.
But dude this is absolutely INSANE. I love this, you definitely got a sub from me, I’m so glad I came across this, I’m definitely gonna be going through your other videos and spread the word about you as well to my Gundam buddies, which isn’t many but there are some. They love anything to do with Gundam, won’t do something like this, unlike me, but they would definitely appreciate this Honestly, how long did this take you from start to finish? Do you sell these things? Or just for your own collection? I would LOVE to contract you to make one. Absolutely breath taking
Thanks man! Happy to know there's someone loving it! I'd love to accept some work but in the meantime I'm still busying setting up the local online store. As for how much time spent on this project that's something around 90 hours in total for planning and crafting. Been busying with my kid and all those stuffs so that dragged me to about 3 months or so lol.
That’s 100% cool with me, personal life such as family always comes first. That’s how I was raised, and if you’re asking an artist to provide a product you work on their time, not your own. 👏🏻👏🏻
Great that you went this route. Such dioramas with some depth are always great to hide the battery pack and power switch through an access in the back.
Hasn't Shibuya had enough at this point? 💀
Aha aha ahahahahahaha😂
Why is Shibuya always the choice for city damage in Japan?😂😂😂
I admire your no-primer paint approach. It never worked out for me. Beautiful work.
Next Qan T plss
Amazing work, just love it!
Thanks bro!
Awesome
This in my favourite video . So nice view bro btw nice video 🤙🤙
Thanks man!!!
Beyond amazing work, but I think the hole would be a lot bigger than that! Thank you for sharing
Make star burning Gundam diorama please
HOPE TOO SEE RX 78 2 GRANDPAA MOUNT THE WALL OUT OFF THE WHITE BASE
Dam, just absolutely raw doggin it with that paint. Not a drop of primer in sight. I love it
Just a thought, but wouldn’t the Blue Eyes white dragon Bandai model kit look cool coming out of the wall
Write it down! Write it down!!
These wall mount dioramas are incredible! I love the way you use synthetic cotton for smoke effects too
Thank you so much!
My god, if only I had the artistic ability to do half of this shit that I imagine and think of. There’s so much but watching these videos gets me pumped to keep learning. I still gotta get some models and get them built. I grew up putting together Car models ever since I was like 6 or 7 is when I started and I’m 29 now. I lost a lot of them one hurricane season here in Florida when we got hit with 2 back to back hurricanes. We lost EVERYTHING. The house stood but it was basically re-done the entire inside. Furniture gone, all of my old toys, transformers, old hot wheels which come to find out my parents kept and cleaned them and surprised me back about 2 years ago, but if I had all of my car models I did, I would probably be sitting at like 30 models, granted you can tell a 7 year old did it but as time went on I got better and better. I wish I still had them to display, but I got 6 of my dad’s old ones he never got to do so I think that I’m gonna break out the airbrush kit and me and him can set aside a weekend to do a set each.
I'm sorry to hear that man, can't imagine all my work gone in just one night, that will be painful! Wish you guys have fun for every build in the future!
Next Qan T
Make a gundam samurai diorama please
is very look awesome. but i wanna ask about white piece what that call ; -; am very new for gunpla but i waana try make some
Owh do u mean the white colour board? In Malaysia’s store we call it pvc foam board. It can be named differently in different country though.
@@MezHobby so much thank 🙏🏻 also you work is so amazing I already watch 2 videos is very inspired me ขอบคุณมากครับ
Unicorn mg rx-0 pls..
He's done a gundam unicorn diorama before it's like a rusted gundam unicorn stuck in a mountain trying to run away idk
This is amazing. I love the weathering affects
Hi! What an amazing job! Well done!
I'm looking for the same frames that you use for my dioramas? Where do you buy them?
Thanks! Most of my frames are from local gifts store, some are from ikea too
@@MezHobby ok, thank U! Continue to make us dream with your creations
@@loulourider8859 you're most welcome bro!
めちゃくちゃかっこよくて好き
fantasticccc....cheers from Mexico! How do you keep your gundam in one pice in that same position= how do you glue the parts of the model? how to keep my gundam in a posse?
Thanks man! Maybe the gundam is fresh build out of the box so the joints are tight enough, but if anything goes wrong I did prepared some 3 seconds glue to fill it into the joints, just make sure that's the correct pose we need and it's all good. Cheers!
@@MezHobby tnxs for ur time! keep doin great job! im a huge fan! ha ve a nice week bro!
Thanks man, that means a lot to me! Cheers!
This is literally inspired me to do a diorama myself however you have to ask yourself on the dusting side of things how well will that keep on the wall well the answer is not so well naturally dusting can help but with all the little organic looking bits and Bobs like trees and cotton only get so far. .... deep shadow box or a good Hutch
nice. only critique I have, is your vines. they still look wire-ish.
reverse wrap them in 10mm masking tape (so, sticky side out, and 10mm works best as its a crooked/wiry piece), then roll/cover them in fine grain dust (hobby store), spray with alcohol/glue mix, and paint whatever colour you'd like. works a treat.
Thanks man! I feel enlightened, nvr know mixing alcohol with glue is a thing!🤩
เป็นกำลังใจให้นะครับชอบผลงานมากครับ
Is it strong only with magnet?
The magnet is surprisingly strong, but to maintain the pose i recommend using glue on those joints to make it permanent, also i did use some glue on the mace to support the upperpart of barbatos.
@@MezHobby i see, thank you
Amazing result! Loved all the techniques applied :).
Awesome Diorama, very creative with the wall mount, wow scratch build trees and building, lights , etc. and no airbrush . Awesome 👏🏼
Can you do Qan T?
鋼彈獵魔,火星最早的鋼彈吧!在我有限的知識裡
That thing is sick
It is very cool I thing I wanted to try to
Wonder how much something like this with Epyon would cost
Thank you for this step by step diorama. Just when I look for city diorama, it's a very good source of inspiration, and tutorial.
I will not do it in a wall mount, but more classical, but still, it helps a lot.
the tips you’re giving out here are insane! thank you!
Kereen
Cooool ♥️❤️👑
👏👏👏
🤯
Amazing
Indo
It looks amazing but 1 question how is something so big coming out of that LIL window?
Hahaha thanks man! Yea it is not coming out, it's stepping on🤣
Awesome work 😊👍
Damn Genius. Instant masterpiece 😢😢😢
정말 쉽게 쉽게 잘 만드세요.
잘 보고 갑니다~~^^
I am impressed with your work, although I accept the negative comments, but the planning of the work from the name is very informative. Another highlight of the work itself is the effect of breaking through the building. It's good. I'm not very good at English. If you can't understand it, all in all, I like your work. It's very good.
It's amazing
Your talent is amazing! I’m always in awe of your work
awsome build man keep it up... =)
Thanks man! I'm loving your channel alrd, lots of cool things going on there!
@@MezHobby woah ive never expected that.. thank you so much mate 🥰🥰
That's the Epic Barbatos we all love !
Kshatriya
Wow nice to see another malaysian doing amazing things 🤩
How u know har?😂
Awesomeeeee
this is my favourite of all your builds so far. that building background is PRIME!! well done.
though now i'm staring at my plain Barbaros and judging him for being such a disappointment.
Hahaha hope you found something here and there for your barbatos man. Thank you!
Amazing work and result as always I think it would be cool to see a hgce Strike Freedom Gundam wall build because it’s one of many peoples favorite Gundams.
Yes that's my best interest atm, have to improve myself more until the day i can make it a real beauty. Anyways thanks man!
@@MezHobby your welcome.
Really great work!!
Incredible vids. Amazing art. Thanks for sharing and inspiring!
Thank you so much 😀
Looks amazing!
But dude this is absolutely INSANE. I love this, you definitely got a sub from me, I’m so glad I came across this, I’m definitely gonna be going through your other videos and spread the word about you as well to my Gundam buddies, which isn’t many but there are some. They love anything to do with Gundam, won’t do something like this, unlike me, but they would definitely appreciate this
Honestly, how long did this take you from start to finish? Do you sell these things? Or just for your own collection? I would LOVE to contract you to make one. Absolutely breath taking
Thanks man! Happy to know there's someone loving it! I'd love to accept some work but in the meantime I'm still busying setting up the local online store.
As for how much time spent on this project that's something around 90 hours in total for planning and crafting. Been busying with my kid and all those stuffs so that dragged me to about 3 months or so lol.
That’s 100% cool with me, personal life such as family always comes first. That’s how I was raised, and if you’re asking an artist to provide a product you work on their time, not your own. 👏🏻👏🏻
My inspiration..
Am honoured bro! Thanks!
Great that you went this route. Such dioramas with some depth are always great to hide the battery pack and power switch through an access in the back.
coming out from a black hole diorama turn A
this is so sick, very inspirational
Another masterpiece ❤️❤️❤️
Thanks man! Glad you like it
what an artist! incredibe!
Can buy this ?
Amazing! 😮
THIS IS INSANE
Amazing work
Superb is all i can say!!!🫡🫰