Rafter || How To Build A Shed - Part 3 || DIY || Easy || my hard way of doing it

Easy Rafter // anyone can build // Build Shed 10x12 One man
How to build shed part 3
10×12 Gable Shed: First Time
Note: I was building the shed for the first time, mostly doing one-man work while working on this shed. I am also an entry-level woodworker by passion. Therefore, things may have gone wrong. I really appreciate your positive feedback. Thank you.
Contact the building department before starting the job.
Materials
(material for door & window not included below)
Floor
2 - pressure treated 2×6 - 12′
10 - pressure treated 2×6 - 10′
3 - pressure treated 4×4 - 12′
4 - 3/4″ tongue and groove plywood - 4’x8′ sheet
Wall Frames
6 - 2×4 - 12′
46 - 2×4 - 8′
6 - 2×4 - 10′
Roof Frame - Rafters/Truss
28 - 2×4 - 8′
10 - 2×4 - 10′
Siding
13 - 5/8″ t1-11 exterior siding - 4’x8′ sheet
Roof Trim
4 - 2×6 - 8′
Roof Deck
8 - 1/2″ plywood - 4’x8′ sheet
Corner Trim
4 - 1×4 - 8′
4 - 1×4 - 10′
Hardware
3 1/2″ galvanized nails
2″ deck screws
2″ galvanized nails
1 1/4″ galvanized finishing nails
shingles
roof tacks
roofing felt
staples
drip edge
For the detailed plan
visit www.construct101.com/shed-pla...
Tools
Hitachi framing nailer
Dewalt Drill
Dewalt Air Compressor
Dewalt Mitter Saw
Skill Circular Saw
Hitachi Finish Nailer
Square
Ladder
Measuring Tape
Camera
Iphone 8
Editing software
Mac/Final cut pro
Background Music
RUclips Library