Right this did not work for me so i found the official Volvo UK way of resting the maintenance for a 2014/2015 XC60. Keep feet off clutch and brake. DO NOT PUT KEY IN CAR! Hit start once so dash lights up Get to the T2 by using the slider on end of the stick on your left that has OK on the top of it! Then hold START and OK for 10 secs (no key-no clutch - no brake- you do not start the car) After 10 secs the 'i' will flash and then let go of both and your done! Simple! Hope this helps, obviously it seems difference firmware versions of the volvo xc 60 software have different methods!
@@ICKY427 ;) Glad it worked for you ! it took me a lot of time to find out the official way so i figured there must be loads of people in the same boat who could not reset using the 6 different RUclips methods.
Works great. Had a little trouble at first but that's always the case with these things. Just remember to release the OK button and the reset button as soon as the orange letter "i" starts blinking. It will only blink for a short time and after that you are too late.
This did not work for me. I put the key fob into the slot, set to T2, scrolled to service status, hold OK and press and hold start for 2 seconds. When everything lit up, I held the ok & reset buttons until the "i" flashed and then I released. It did not work.
Hello, i tried several times, but my englisch is bad, sorry, can you write in easy words, please? I do not know, when i have to push reset and where is the eye ? Greetings
I tried 6 different unsuccessful ways shown on RUclips and finally invented this How to reset Volvo Keyless maintenance reminder on my 2015 V60: FOB in dash Press OK Toggle to get service status Press and hold reset Press and hold OK Press and release start Press and hold start Keep holding all 3 until the 'I" button first appears (about 10 seconds) AND IMMEDIATELY LET GO OF ALL 3! (or at lease reset + start) (if you do not let go soon enuf then you miss the "window") Release start if you have not already (if car is still on then turn it off but it should be off) Then leave car alone for 3 minutes (not sure needed but they say to) You can check your work by: OK toggle to Service Status OK You should see time and miles set to 12 mounts and 10000+ miles dk
Right this did not work for me so i found the official Volvo UK way of resting the maintenance for a 2014/2015 XC60.
Keep feet off clutch and brake. DO NOT PUT KEY IN CAR!
Hit start once so dash lights up
Get to the T2 by using the slider on end of the stick on your left that has OK on the top of it!
Then hold START and OK for 10 secs (no key-no clutch - no brake- you do not start the car)
After 10 secs the 'i' will flash and then let go of both and your done!
Simple!
Hope this helps, obviously it seems difference firmware versions of the volvo xc 60 software have different methods!
Badrobot you are a godsend
@@ICKY427 ;) Glad it worked for you ! it took me a lot of time to find out the official way so i figured there must be loads of people in the same boat who could not reset using the 6 different RUclips methods.
Thank you!!!
Badrobot can you direct me to an expert Volvo repairer my xc60
Still works. 2016 S60
You absolute legend. Just done mine now. Absolute best advice. You sir have a new suscriber.
Works great. Had a little trouble at first but that's always the case with these things. Just remember to release the OK button and the reset button as soon as the orange letter "i" starts blinking. It will only blink for a short time and after that you are too late.
Thanks for this. Worked on my 2015 xc60
You are THE man!
Thank you!! PeRFect in my S60 👏
The only vid which helped :) thumbs up
Funcionó perfecto en mi volvo S60 T4 Rdesign 2016 😊
Superbe...merci a lot mate
Thank you did work on my d5244t21 👍
very useful video thx
thank you and nice accent you got there mate
Lancashire born and bred
Perfect
Thanks bud.
Hi - would you know what needs to be done after replacing the battery in terms of calibration and resets? Many thanks.
Thank You
Thanks for the comments, hope you subscribe
Is there option to switch language? I switched on main board but I can't on speedometer.
This did not work for me. I put the key fob into the slot, set to T2, scrolled to service status, hold OK and press and hold start for 2 seconds. When everything lit up, I held the ok & reset buttons until the "i" flashed and then I released. It did not work.
hello can you write all the teps so i may follow slowly.thanks
It would only work when I was on the no trip rather than t2
Hello, i tried several times, but my englisch is bad, sorry, can you write in easy words, please? I do not know, when i have to push reset and where is the eye ? Greetings
Doesn't work.
I tried 6 different unsuccessful ways shown on RUclips and finally invented this
How to reset Volvo Keyless maintenance reminder
on my 2015 V60:
FOB in dash
Press OK
Toggle to get service status
Press and hold reset
Press and hold OK
Press and release start
Press and hold start
Keep holding all 3 until the 'I" button first appears (about 10 seconds)
AND IMMEDIATELY LET GO OF ALL 3! (or at lease reset + start)
(if you do not let go soon enuf then you miss the "window")
Release start if you have not already
(if car is still on then turn it off but it should be off)
Then leave car alone for 3 minutes (not sure needed but they say to)
You can check your work by:
OK
toggle to Service Status
OK
You should see time and miles set to 12 mounts and 10000+ miles
dk
Thank you
Try t1 did not work on t2
can you direct me to an expert Volvo repairer my xc60
No working at all
These are the dumbest cars ever made