This is great to hear! So glad the video was helpful! Not a fun project but definitely necessary at times. Thank you very much for watching and for sharing the feedback! Cheers 🙌🏼
Awesome video, Captain Dan! I was glad to see that you pulled your sleeves up above your elbows, at least it looked that way on one arm, to keep you from getting it soiled with black tank contents. You did an awesome job cleaning everything up while keeping gloved up, although it must’ve been really hot, because your hands were really looking sweaty in those gloves. Thank you so much for sharing this important maintenance video! It’s always a great day to be on a yacht.
Again great video! I just wanted to ask if you would for us just learning, add in all items if any you use to clean and or lubricate etc! Possible other videos if you’d like, I know I would aside from any and all engine room items, the shower and head pumps, those enclosed things in bottom of shower under floor, I heard those go bad a lot? Much appreciated, you are great and a wealth of knowledge!
Thank you for continued watching and commenting, I appreciate it! I can work on some of these topics. Shower sump box pumps can and do go out more often than a standard bilge pump. I can get one of those videos at some point too! I’ve got a running list of topics and will hit record when one of these projects come up. I’m happy to hear you are finding the videos helpful!
Hello Capt. Dan. I noticed that you are on a Prestige yacht in this vid. I have been trying to find a waste holding tank vent filter. Does the Prestige 500s have one? Wracking my brain!!
Im not sure if they changed the location depending on the year of the vessel but on the 550 and some other 500s, the filter was behind the forward VIP closet wall on the port side. Hope this helps! Thanks for watching and for the question. Cheers!
Very informative. Thank you. But…. Two tanks port & starboard. Both of them the tops of the tank are very close to the ceiling in the engine room. IF I have that style it would require removing the tank to get float out. I guess I may have a different type of sending unit
Great video Captain Dan!! Finally I found that video. You should add more detail to the name because it doesn't come up on the search easily. Question, can I open that larger tab to clean the tank? Is that a Jabsco tank? Where do I get the sensor replacement? Thanks
Great information on the video title! I will look at editing that. Great questions as well. I am not sure of the tank brand. I can check next time I am in the bilge of a similar model, but I believe those are fairly interchangeable. The larger black tab can be opened, but they are typically sealed in pretty well to keep smells from seeping out. You would need to make sure to properly reseal after cleaning. I have cleaned out a fresh water holding tank from the sensor hole in the past, it takes a little longer with a few more rounds of spraying but did the trick. The sensor replacement is pretty easy to replace, most boat yards or parts stores should be able to order the part. If you ever have a problem, shoot me an email and I’d be glad to try and help. Thank you again for watching, commenting and for the great questions! Cheers!
Great video, much appreciated as I have a Prestige 500S with identical holding tank. I must say however that when I tried to remove the tube it was absolutely impossible. Is there any way to do it? Any ideas as to facilitate such removal? Many thanks!!
This was definitely not an easy part to remove. I found that a pair of locking vise-grips worked the best. Somewhere in the comments for this video someone had another suggestion that could work but it involved a little more work. Check that as another option. I manage and maintain multiple Prestige yachts. Feel free to reach out with any questions! Thank you for watching and for your input. Cheers!
You can use and flush marine grade toilet paper down but it’s recommended not to use too much as the systems can be sensitive to plugging up. Marine systems are not as hardy the system in your home. Thank you for watching and commenting, I’m glad you like the content! I will try to keep bringing out similar repair and maintenance content. Cheers!
Some people wish for smelly vision, I say watch this vid and be careful what you wish for 🤪. I'm enjoying these vids, covering the not so glamorous subjects, good job. 👍🇬🇧
That very true, the grass isn’t always greener… thank you for your input! I’m very happy to hear you are liking the videos. Boating is a beautiful thing but there are parts that can be a little less desirable ha. That’s exactly what we build the business around - let me help remove the hassles and you get right to enjoying your boat. Thank you for watching and commenting! 🙌🏼
@@ElevateYacht your vids are keeping it real and honest as well as showing the important 'behind the scenes' jobs that need to be done from time to time, very interesting to watch. 👍🇬🇧
You just need an 1/2 drive 8 point socket what ever size the square nut is. ( example ) www.royalsupply.com/store/pc/Wright-Tool-4340-1-2-Inch-Drive-1-1-4-Inch-Special-8-Point-Chrome-Square-Socket-p50666.htm Leave the socket zip tied to one of the nearby hoses when finished for the next time.
Great input! Thanks for sharing. The hard part is having the electrical coming out of the one end so I’m not sure of the socket will fit on, but I will definitely try! Thanks for watching!
@@ElevateYacht Take a grinder with a cut off blade and cut a slot in the side of the socket to accommodate the wire, the sensor unit shouldn't be tightened so tight as to break the weakened socket.
Great video, just subscribed, learning a lot. Keep the videos coming...from over the pond...
Welcome to the channel! Glad you are enjoying the videos! Thank you for commenting and subscribing! Cheers!
Because of your video I was able to remove, disassemble, and clean our sending units. Thank you for posting. Big help.
This is great to hear! So glad the video was helpful! Not a fun project but definitely necessary at times. Thank you very much for watching and for sharing the feedback! Cheers 🙌🏼
Awesome video, Captain Dan! I was glad to see that you pulled your sleeves up above your elbows, at least it looked that way on one arm, to keep you from getting it soiled with black tank contents. You did an awesome job cleaning everything up while keeping gloved up, although it must’ve been really hot, because your hands were really looking sweaty in those gloves. Thank you so much for sharing this important maintenance video! It’s always a great day to be on a yacht.
100%! I’d pick working on the waste tank of a boat over a desk job any day 💪🏼
You are a brave man. Thanks for showing us this.
Hah somebody’s got to do it and I’d rather it me me than my competition :)
Thank you for watching and commenting! Cheers!
Again great video! I just wanted to ask if you would for us just learning, add in all items if any you use to clean and or lubricate etc! Possible other videos if you’d like, I know I would aside from any and all engine room items, the shower and head pumps, those enclosed things in bottom of shower under floor, I heard those go bad a lot? Much appreciated, you are great and a wealth of knowledge!
Thank you for continued watching and commenting, I appreciate it! I can work on some of these topics. Shower sump box pumps can and do go out more often than a standard bilge pump. I can get one of those videos at some point too! I’ve got a running list of topics and will hit record when one of these projects come up. I’m happy to hear you are finding the videos helpful!
Great cap. Dean 👏
It’s a messy job but somebody’s got to do it 🤷🏼♂️ thank you for watching and commenting!
Very helpful and to the point thank you😀
Very happy the video was helpful! Thank you for watching and sharing 🙌🏼
Helpful, Thanks! I'd like to see you tackle a Dometic "Tankwatch 4" repair. Cheers!
After every pump out add a teaspoon of Norflex Digestor in the head and it will eliminate the problem. You can purchase at Denfender
Great advice! I’ll have to suggest that to my clients. Thank you for watching and commenting! Cheers
Happy to see you have gloves on 😂
This was one time that definitely required gloves 🤣🤢
Hello Capt. Dan. I noticed that you are on a Prestige yacht in this vid. I have been trying to find a waste holding tank vent filter. Does the Prestige 500s have one? Wracking my brain!!
Im not sure if they changed the location depending on the year of the vessel but on the 550 and some other 500s, the filter was behind the forward VIP closet wall on the port side. Hope this helps! Thanks for watching and for the question. Cheers!
Very informative. Thank you. But…. Two tanks port & starboard. Both of them the tops of the tank are very close to the ceiling in the engine room. IF I have that style it would require removing the tank to get float out. I guess I may have a different type of sending unit
Great video Captain Dan!! Finally I found that video. You should add more detail to the name because it doesn't come up on the search easily. Question, can I open that larger tab to clean the tank? Is that a Jabsco tank? Where do I get the sensor replacement? Thanks
Great information on the video title! I will look at editing that. Great questions as well. I am not sure of the tank brand. I can check next time I am in the bilge of a similar model, but I believe those are fairly interchangeable. The larger black tab can be opened, but they are typically sealed in pretty well to keep smells from seeping out. You would need to make sure to properly reseal after cleaning. I have cleaned out a fresh water holding tank from the sensor hole in the past, it takes a little longer with a few more rounds of spraying but did the trick. The sensor replacement is pretty easy to replace, most boat yards or parts stores should be able to order the part. If you ever have a problem, shoot me an email and I’d be glad to try and help.
Thank you again for watching, commenting and for the great questions! Cheers!
Great video, much appreciated as I have a Prestige 500S with identical holding tank.
I must say however that when I tried to remove the tube it was absolutely impossible. Is there any way to do it?
Any ideas as to facilitate such removal?
Many thanks!!
This was definitely not an easy part to remove. I found that a pair of locking vise-grips worked the best. Somewhere in the comments for this video someone had another suggestion that could work but it involved a little more work. Check that as another option.
I manage and maintain multiple Prestige yachts. Feel free to reach out with any questions! Thank you for watching and for your input. Cheers!
Finally ☺️ i found out how to remove the waste sensor and it looks prestige yacht right?😁
Yes this was on a Prestige. I’ve cleaned the sensor on other brands and the process is pretty much the same.
Finally someone showing the turd end of the job. Can you put loo roll down the toilet? Thanks and show more of the same. Cheers.
You can use and flush marine grade toilet paper down but it’s recommended not to use too much as the systems can be sensitive to plugging up. Marine systems are not as hardy the system in your home. Thank you for watching and commenting, I’m glad you like the content! I will try to keep bringing out similar repair and maintenance content. Cheers!
Just a thought. You might invest in a 12 point socket to make it easier to remove or even a crows foot wrench. Just a thought.
Great suggestion. Can never have enough tools to make the jobs easier. Thank you for watching and for the suggestion! Cheers
as some who works at a marina i can smell the entire video
🤣 sad but true. Thanks for watching!
Some people wish for smelly vision, I say watch this vid and be careful what you wish for 🤪.
I'm enjoying these vids, covering the not so glamorous subjects, good job. 👍🇬🇧
That very true, the grass isn’t always greener… thank you for your input! I’m very happy to hear you are liking the videos. Boating is a beautiful thing but there are parts that can be a little less desirable ha. That’s exactly what we build the business around - let me help remove the hassles and you get right to enjoying your boat.
Thank you for watching and commenting! 🙌🏼
@@ElevateYacht your vids are keeping it real and honest as well as showing the important 'behind the scenes' jobs that need to be done from time to time, very interesting to watch. 👍🇬🇧
I appreciate you and your feedback! 💪🏼
You just need an 1/2 drive 8 point socket what ever size the square nut is.
( example ) www.royalsupply.com/store/pc/Wright-Tool-4340-1-2-Inch-Drive-1-1-4-Inch-Special-8-Point-Chrome-Square-Socket-p50666.htm
Leave the socket zip tied to one of the nearby hoses when finished for the next time.
Great input! Thanks for sharing. The hard part is having the electrical coming out of the one end so I’m not sure of the socket will fit on, but I will definitely try! Thanks for watching!
@@ElevateYacht Take a grinder with a cut off blade and cut a slot in the side of the socket to accommodate the wire, the sensor unit shouldn't be tightened so tight as to break the weakened socket.
Dang I like that idea. Great suggestions. Thank you!
Nice to see gaskets on the hatch. Great place for spray clorox !
I'd be in a full Hazmat suit, with 4 pairs of gloves, and a NASA space helmet on. *lol* Thanks for the _crappy_ video. :-)
Haha yea that’s how I felt but I left my space helmet at the cleaners 😖🤣
@@michaelpowell9164 been there, done that 🤢
I would need a puke bucket to do that job ;D
Hah yea it was close to necessary for the job. Opened the windows and door for some extra ventilation 🤢 thanks for watching and commenting!