hey dude your circuit doesn't work without connecting te pin in ht12e to ground and connecting A1, A2,A3,A4 in both ht12d & ht12e to ground then it should work am I right cuz when I made your circuit it doesn't work without doing the above
Actually those pins are like passwords, if you connect A1,A5,A6 together with the ground in 12e, then you have to do the same with 12d. Then the 12d will be able to decode the signal/data.
I have a query. In the video you have shown that your are connecting all the transistor's emitter pin to positive and the collector pins to respective LEDs but in the schematic you have shown that emitters are connected to LEDs collectors are connected to positive. Can you elaborate it.
Looks pretty simple . But when led diode blink once , that’s mean my light is running?? And when blink same led diode again, it’s light turning off ?? And I don’t need to program the chips?? And I going to use 3v battery. So I don’t need to use resistors??
Mene iske output pr l293d ic and transistor dono use karke dekha but speed slow h lekin motor ko direct 5v ya 3v current dete h to motor ki speed jayada hoti h. Kya aap bta skte ho ise kese solve kre ?????
I have a task to make a similar scheme, but so that the control buttons are separate from each other. It is not rational to make the 4 transmitter board for each button. Advise the implementation of this task: 1 receiver and 4 separate control buttons. I will be grateful for the answer
Buenos días. No funciona, no se sincronizan los HT. Los valores de resistencias del oscilador interno pin 14 y 15 no parecen correcto. He comprado todos los componentes identica marca pero no puedo sincronizarlos.
@@estechknowledge yeah bro it's wrong te pin that in ht12e should be connected to ground @ pin 1,2,3,4,5 in both (ht12d & ht12e) should be connected to ground too
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
A lot of possible project came up to my mind after watching this video. Thanks alot
hey dude your circuit doesn't work without connecting te pin in ht12e to ground
and connecting A1, A2,A3,A4 in both ht12d & ht12e to ground then it should work
am I right cuz when I made your circuit it doesn't work without doing the above
Actually those pins are like passwords, if you connect A1,A5,A6 together with the ground in 12e, then you have to do the same with 12d. Then the 12d will be able to decode the signal/data.
@@estechknowledge
Then why it's not working without connecting TE pin to ground in ht12e?
The full form of the TE pin is - Transmission Enable.
@@estechknowledge
Yeah so why didn't you connect it to the ground in your diagram 😂👉👈
😁
Eska ek video asa bnava kitne distance tak chal sakta he
Hope you are well. I built the circuit exactly per the schematic. I can't the transmitter and receiver to pair. What do you think I'm doing wrong?
Is it possible keep leds off until we press transmitter's button
Is it possible to separate the receiver circuit into four different pieces with one transmitter please reply
What number did you used for the copper wire and for how many watts for 82 ohms resistors???
Where I can put microphone with buzzer in transmitter and put speaker in receiver and how I can make range is very long like 20 km or more ?
Can I use motors instead of lights?How?
i think relay could work to connect two wire to passe the 12v or more volt
Will there be signal interference if multiple SRX882 and STX882 are used?
No
Can I use it for wireless ignition?
Hi sir, do you know how long the battery lasts in the transmitter?
Ye bnna ke bhijwa skte hai kya
I have a query. In the video you have shown that your are connecting all the transistor's emitter pin to positive and the collector pins to respective LEDs but in the schematic you have shown that emitters are connected to LEDs collectors are connected to positive. Can you elaborate it.
Can i control 2 receiver in one single transmitter?
Jkfjrjke
Can I replace the LEDs with micro vibration motor? Please notice me😢😢
Awesome… very beautiful 👌 thanks for sharing my friend 👍👍👍👍👍👍🥰♥️
Can we use 12v battery in receiver?
Looks pretty simple . But when led diode blink once , that’s mean my light is running?? And when blink same led diode again, it’s light turning off ??
And I don’t need to program the chips??
And I going to use 3v battery. So I don’t need to use resistors??
Stx & srx use 5v so you cant
can I use xy-mk-5v receiver & fs1000a transmitter instead of srx & stx modules?
Offcourse
@@estechknowledge
One more question what is the range does the that I will use modules work at?
Very Good, thanks you! I´m from Brazil!
Welcome!
What is range
Bhai me delhi se hun mjhe 2ch ka receiver banana he bata sakte ho kese banega
Sun motor kaun si jagah par lagegi aur kaun sa connection hoga yah to batao
How can i do this with 3.6 v li-po batteries
How to connect motor in it
If you are looking for this - ruclips.net/video/U6rAmq9_yUs/видео.html
Helloo, can you add a motor vibration to it?
I hope you will notice my comment
Hi can I geve there 7,4v?
Offcourse
@@estechknowledge thanks
Mene iske output pr l293d ic and transistor dono use karke dekha but speed slow h lekin motor ko direct 5v ya 3v current dete h to motor ki speed jayada hoti h.
Kya aap bta skte ho ise kese solve kre ?????
how to connect relay 220AC in it
12v battery can I use instead of 9v
Offcourse
Hello, you who teach this circuit, please include the circuit of this receiver and transmitter.
Available in the video description
Mini hidden camera 📷 banake dikhao please bro
I have a task to make a similar scheme, but so that the control buttons are separate from each other. It is not rational to make the 4 transmitter board for each button. Advise the implementation of this task: 1 receiver and 4 separate control buttons. I will be grateful for the answer
Can we use CTBC 548 B
Can i power it with lithium ion battery?
Yes
How can you make this into one channel?
Do not connect all the leds and buttons. Just connect one of this two. If this doesnt help search on yt. Sorry for my english
Bos puwede po ba ako mag pa assemble niyan 12volts. Hindi siya de remote. Gawin ko pa switch type.
Is it possible to do the same but with more channels and for 6-9v dc motors?
Yes
@@nprabhudev ok! but do you have a video or something? ill be pleased to see it
@@_Creativo if you need more channels, you need more ICs since these output only 4 pins.
@@muhammadjunaid3650 👍
Can this be used in drones
No
Sir can i use RX470C-VO1 to make this
А эту схему можно использовать для дрона .
No
@@estechknowledge yes
Caractéristiques des composants svp
There is circuit this project?
Yes it's an electronic circuit based project.
How we cand make this with 8-9 channel? Thank you
If you are asking for this - ruclips.net/video/uAci7c8N1VA/видео.html
Skema ?
Available in the video description
Hi, I want to buy such a device but with range more that 300 meters, can you make one for me, and I will buy it from you?
if I wanted to put some motors affixed to the LEDs would it work?
If you are looking for this - ruclips.net/video/U6rAmq9_yUs/видео.html
Schematic diagram is required
Are there latch function in this circuit?
No
how long can i take To learn?
Hmm. Turn on a LED up to 100 meters away. Can see at night, not so much in day light. What is the purpose?
@Hisham Guess Since you put this way you proved me wrong. Thank you.
Please help..this circuit doesn't work😢...I spend 1000 rupees in this circuit components...please help🙏🙏🙏
Take some photos of your project and send it to me on Instagram - instagram.com/es_tech_knowledge/
Ingin beli yg seperti itu dimana kang
How make receive lacht, what the ic number
The down arrow to the right of the video title, scroll down to see link to circuit diagrams and parts
@@hthharrison7764 yes i know that, but that was a momentay ic, not lact number of ic. iwan to lacht number ic for the receiver
Very nice👍👍👍👍 video thank you🙏🙏🙏🙏🙏🙏🙏
Klik ingin beli dimana,toko online adalah?
Bro i want one of them but there are no electronic components shop near my home plz do something sad😢😢😭
bro What is its range?
Sir can i use 2 transmitter and receiver.
Offcourse
Cool info, thanks for sharing, well done :)
Hii sir tell me how to connect this in rc car and make new video how to connect receiver in rc car
mujhe lena h what is price its
Buenos días. No funciona, no se sincronizan los HT. Los valores de resistencias del oscilador interno pin 14 y 15 no parecen correcto. He comprado todos los componentes identica marca pero no puedo sincronizarlos.
What you are using as power supply?
seriously up to 100 meters?
More than 100 meter
@@estechknowledgesir , please tell me truly ,, will it work more than 100 meters
Because today I am going to buy it ,, please reply me sir
@@Aswin_Raaj100yes bro
what is range if it's more than 100 meters ?
@@Aswin_Raaj100maximum 10 mtrs only
One video for Wire connection
Bro buying link please give me
can i have the scheme?
Available in the video description
Bro plz give circuit diagram
Available in the video description
@@estechknowledge thanks I will make this for mini project
Relay control karke bataoo
Excellent 👍 thank you
nice, beware schematic ht12D and ht12E in oppesite order
Thanks for reporting.
Just updated the diagram.
2:26
0:14
amazing sir just amazing
Bom dia parabens muito bom
it's amazing
Relay control karo
Where're your design?
Available in the video description of the video
Nice 👏👏👏👏😉👍🇧🇷🇧🇷
send message in morsecode or display binary decimal
🇮🇳🇮🇳🙏🙏👍 o, p
Excelente proyecto!
Esta equivocado el diagrama
Which part?
@@estechknowledge
yeah bro it's wrong te pin that in ht12e should be connected to ground @ pin 1,2,3,4,5 in both (ht12d & ht12e) should be connected to ground too
@@yousefelectronics9255 👍
No. 100 Metre+ .
❤️👌👌👌
😅hola
Working principle
should be developed
Assest name
Doesn't work..Don't try this...Fake❌
No it is not fake it works just perfectly
@@estechknowledge first i printing your circuit and buying a components through online and connectioned it ,but doesn't work..
h
Is it possible to separate the receiver circuit into four different pieces with one transmitter please reply
That's I think about it
how to connect relay 220AC in it
0:19
0:16
2:29
Is it possible to separate the receiver circuit into four different pieces with one transmitter please reply
5:11
2:34
Is it possible to separate the receiver circuit into four different pieces with one transmitter please reply