High Speed Omron Adept Quattro Robot handling steel balls on conveyor
HTML-код
- Опубликовано: 21 окт 2024
- The High Speed Industrial Robot Omron Adept Quattro s650 robot handling steel ball bearings at high speed over a moving conveyor belt. This video demonstrates the unmatched speed of the Adept Quattro robot and technical achievements in robot system performance. This is more than simply motor speeds; to manage the robot doing this much in so little time takes a high performance motion controller, software, and electronics.
To the user this means increased product throughput, but not at the cost of control over the motions. Adept's SmartController CX and V+ programming language allow the management of the specific motions: speeds, accelerations and accel profiles, end-of-motion tolerances and behavior, etc. When manufacturers look at automation in a cost-per-pick analysis, being able to pick products faster and more reliably means an improvement to the bottom line.
The unique patented design of the Adept Quattro robot enables this level of performance with its four-arm parallel kinematic (known as PAR-4). This is differentiated from the three-arm delta style robots commonly seen in the industry. The four motors share the load and contribute to the motion, thus reducing the load on the individual joints and allowing greater speeds, higher payloads, and improved performance throughout the entire robots work envelope.
More Info
IN USA
industrial.omr...
IN CANADA
industrial.omr...
IN MEXICO
industrial.omr...
This is the third video in the specific category of impressive robotics demonstrations from 2008-2009 that has appeared in my recommended
He's got balls of steel!
i want this machine on my office desktop to annoy coworkers
The designer is pretty much in a state of: YEAH BABY I RULE!
0:50 "watch me flex..."
"Now you're just showing off Carl..."
This is like something from aperture science o_o - there is no cake!
Video on recommended after 11 years, gj RUclips
Meh... I can do that. Just give me three double espressos, a line of uncut Colombian cocaine, and stand back!
awesome! the speed and precision are absolutely beautiful...
Holy crap that thing is scary.
Please demo one of these set up to do calculations on an abacus.
jajajaj..Very nice..!
Witch software is used to achieve this ??
Is that just plain inverse kinematics or are there sensors and a feedback loop?
Was the large white housing for this made by a company called Isthmus Engineering & Manufacturing by any chance?
@timbobel you don't see the potential this thing has in mass manufacturing?
I've seen one of these in real life, its kinda creepy looking when it does that thing where it swings the head in a circle. Its like a huge robotic carbon fiber spider.
Actually, I think I may have seen this exact model, I was at the workshop of a company that made a white frame for one of these that is verrrrry similar to the one this one is housed in.
I was expecting an Audi, but this is cool too.
What is the sound at 1:05?
Is that the servos actuating? Or is it just whipping through the air?
When industrial robots learn Kung Fu, I get a little worried.
Coolest robots ever!
First loud noise i Believe is the suction system.
Whipping is probably just air whipping due to size n speed.
@L00NGB00W Good question. I think it's just showing range of movement there...it could be air whooshing, considering the large size of the robot and the area it's moving around in.
oh look, a million dollar machine that can move balls. that was so worth the money.
That robot has balls of steel ..
The marble thing is okay... but the sound this thing makes about 0:50 or so is pretty neat. Man it moves FAST!
1:07 made me think of skynet, fast robots ftw
Is Adept a subsidiary of Cyberdyne?
No, we are part of OMRON.
When did DARPA come in and buy one to adapt for a military weapon?
Just a re-hash of the mech used on flight simulators. It is the computer control that makes it look better than it really is, lets see it do that with 20kg.
yes...but will it Blend?
nice robot
And I for one welcome our new robot overlords.
I want to make Kinematics for 3D model. how can I get the information of this robot Kinematics?
i bet this coud print a REALLY big photo with no mistakes
hey I used that robot at school this morning, It's preety awesome but hard to make a program =)
Danke
haunting! however I wonder why three-leg robots are way more common in the industry?
This thing scares the crap out of me. If you walk near it will it attack? ;)
1:07 - 1:19 that looks scary as hell
but, will it blend?
So. it begins...
1:06 this looks so cool))
lol at the end u can just imagine it going WOOP WOOP WOOP WOOP
The High Speed Ball Movers Union should walk out!
sounds like a abstract version of techno or gabba without bass ahahahah
@leopower7 I've seen that robot...it really is that fast. The video is not sped up at all. Now who's the fool?
why 4 motors though? 3 is typically all you need.
0:50 to 1:20 is robot language for "i'm a winning bad-ass...what you got human?"
@annon003
LOL Someone definitely should make a youtube series about this.
"Is it a good idea to give this to a robot?"
wow, give me two!
man.. thats insane :D
The future of dentistry. Open wide!
*insert portal references and ball handling jokes here*
STRIIIIIIIIIIIIIIIDER!!!
Reminds me on GLADOS-Design from Portal ;-)
So Cool But Scary.........
Are all these robots so loud?
This robot is not loud at all, the sound is generated by the bearing balls hitting the metal plate
TheNorthkiters It's mostly the vacuum it's using.
strange... it looks a lot like ABB's IRB 340 Flexpicker - not new technology at all. still very nice!
@noxure What are you "facepalming" about?
Why is my arachnophobia acting up all of a sudden ...
sounds awsome!! to me anyeasy :D
Packaging, to be sure. Pretty much every time I see a delta or another parallel robot, it's packing or sorting something.
Why does it need 4 servos instead of 3?
God loves a trinity
Дмитрий Маслов . . . ? O.o
For accuracy.
It might have something to do with it's ability to rotate, or it might just be for more power (allows greater acceleration and speed) and accuracy.
4th servo gives another degree of freedom, look at 1:10 and thereabouts. I guess it might be better to have 4th parallel arm rather than rotating head or central transmission plunger
I dare you play Bishop with this robot!
How well can It make sushi?
just don't give it a sword.
u have to have balls of steel to do that. XD
sounds just like industrial music
When it moves its arms, thats reallly reallllly creepy
Are you able to make it louder? It's too quiet.
i need one :)
Looks a bit like the giant spider from Wild Wild West
@Tedsuzan Can you juggle?
It must have been frustrating to sit down and think, "hmm, how will we calculate the inertial forces acting upon this system?" My head would explode. It's alot of work and alot of math....
Just fast algorithms of kinemetics and dyanmics models
anyone ever see the second reniassonce? that what this shit looks like.
@iRouRoui it acellerate from 0-234.5 mph in one sec so yeh
What in the hell... What kind of math does this take!?
give it a big playing field and make it play snake.
just make it smart !, and end whit 1 bal in the middle, just a simple pick and place.
Hanzhen harmonic drive gear,
strain wave reducer, robot joint , over 30 years experience
We cured that whole cancer and aids thing a long time ago right guys? Right???
its not made for this big type of parts... it is for smal parts...
01:07 is this a kungfu video or is this the real sound?
Pretty Impressiv
Pretty slick ! Can it get me a beer & sandwich?
now play starwars music with it
@timbobel oooh, good point :p
A esteira é um requinte de crueldade.
It always knows where the balls are and doesn't have to calculate anything original on the job. It would be more challenging to make it catch balls that can roll away.
I'll have one with fries please
i gues this is a STEEL BALL RUN
@iRouRoui Let's see if that holds when they start chasing you :D
@EmperorOfMars - The fastest in the world!
It looks so... I don't know Sci Fi.
how fast can it solve a Marble Solitaire (watch?v=vdwFTKt56hA)?
Sooo... Faaaaaaast !!!
My union boss isn't going to like this.
WANT ONE GIMME GIMME GIMME
cup stacking game xD?
I'm making a fucking bunker
analogic.... sure