SpectraPure RODI Booster Pump: Review & Setup Guide
HTML-код
- Опубликовано: 23 янв 2016
- Low water pressure can have a negative impact on the purity and output of RODI product water. In this video I provide my review and setup guide for a SpectraPure RODI booster pump kit.
--------Camera Used To Shoot This Video------
Canon EOS 5D Mark III
amzn.to/2M7Qx65
------Lenses Used to Shoot Video-----
Canon EF 100mm f/2.8L IS USM Macro Lens
amzn.to/2K14Bh9
Canon EF 24-70mm f/4.0L
amzn.to/2tdLdam
This VIDEO was EDITED with Adobe Premiere Elements on a Mac.
amzn.to/2K17MFv
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
*Disclosure of Material Connection*
This is a “sponsored video.” The company who sponsored it compensated me via a cash payment, gift, or something else of value to produce it. Regardless, I only recommend products or services I use personally and believe will be good for my viewers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”
That is a really good product. Thumbs up.
Great video as always! Your set up is different than the way BRS had me set up mine. They had me install the booster pump first in line. from the source water then into first sediment filter. Also the pressure switch is in a deferent place. They suggest putting it inbetween the water coming out of the Ro canister then into the di canister.
Great review! I have the 90gpd unit, my pressure is right at 40psi. I'm going to have to pick one of these this year sometime!
I have my booster pump pressure switch hooked up to the output tube, can't figure out why the booster pump won't come on
i have one of those pumps but im having a little trouble with the tso vale it kicks in to late the tank is almost empty when the tso valve kicks i need it to turn on a little sooner. I noticed that you conected the tso valve after the flow restrictor does that make a diffrence? i have mine connected to the tank
I have a 90 gpd and just purchased a booster pump. I followed all the instructions and yet my booster pump seems to shoot right to 90+ psi. When I lower it after a few seconds it stops allowing the water to flow
Can a booster pump be used as a delivery pump from the RO tank to faucet?
Why did you switch the short yellow tubing beside pressure switch?
hello i have a question !
I added 5 micron sediment filter in front of the booster, so my 1 micron and pump don't get mucked up
Was that meant to say "make at least 20 gallons"? I would think running to fill a large water container of say brute trash cans is actually better than making less than 20 gallons per use. And you did say little on and off's will decrease life...but confused about 20 gallon limit to prolong life of filters. Thanks, good video very to the point
I have a 75gpd unit and I get 50 psi without any pump. I had recently hooked up this particular pump so i can boost up my pressure, come to find out the pressure drops and stayed at 45 psi with the pump. This is frustrating. I guess I am going to do more research on how this thing works.
At what back pressure does the pressure switch turn off? And also is there a model number on the pressure switch?
Where did you get the fittings for the tubing?
What is the size of the Allen wrench
Allen should be included 😮