just got this jacket and love it! I decided to go a size up because they were out of my size. I'm 5'10 150 pounds, and the 52 actually fits great, its slightly loose but with the button adjusters and a back insert, that picks up the slack. Also the sleeves don't climb up my arms in the tuck position as many are claiming. Would buy this jacket again, its a must have on a hot day. Recommend the pro armor back protector over the manis for breathability
Classic racey style passes well for leisure wear, not often an option with Dainese. Plus the attention to detail on this leave no room for improvement, as far as I know anyway. Also, these reviews / breakdowns, are rapid and don't miss anything, I ended up watching em more then I needed to, just for the vibes. Thxs, couldn't have 'decide n ride' without it.
@@TomsCornerph i am 1.70 height and weight 70/73kg, what size do you recommend? I would like it to dress like the person in the video, not too large, it fits right, what size is best for me? 48 or 50?
The Dainese “3D Mesh”... what is that made from? Is it a Cordura nylon mesh, or a Polyester/Polyurethane material? The price point honestly worries me a bit... at that price, mesh tends to be poor at thermal friction resistance, cheaper material that melts in a slide. Nasty nasty skin grafts. Any crash testimonials with this jacket?
A size 46 would fit a 36" chest measurement, although since you are taller it might run short in the arms and torso, as that is how Dainese cuts their sport jackets. But, based on your chest (which is the most important measurement), a size 46 is likely the closest proper fit.
Hey, I'm considering buying the Fluo Red version of this jacket, but I'm afraid it might be too orange for me. Since my bike is black and red, I don't want the colours to clash. I've never seen one live, so I'm hesitating. What do you think?
The extra cost of the Hyper Flux is for the waterproof D-Dry liner and molder shoulder details. If you don't need the waterproof liner, the Air Frame is definitely the better value. -DrewZilla *www.revzilla.com/motorcycle/dainese-air-frame-d1-jacket *www.revzilla.com/motorcycle/dainese-hyper-flux-d-dry-jacket
i am 1.70 height and weight 70/73kg, what size do you recommend? I would like it to dress like the person in the video, not too large, it fits right, what size is best for me? 48 or 50?
According to Dainese's sizing chart you should be in either a 46 or a 48, so we would recommend trying either of those two sizes on before you finalize your decision.
hi. jacket size fit me well. but if ride at higher speed over 70mph. the fabric on my shoulder will flap a lot and make annoying noise. is this same for others?
If you would like this jacket, you can reach out to Dainese directly as they have a custom-sizing option directly from their factory for your height. We also have a Big & Tall Guide that might be able to help you as well. ruclips.net/video/9Ibi_-mKm1I/видео.html
No, it isn't a quality issue. The Pro Armor G back protector is just slightly narrower than the back protector pocket. For a larger back protector, consider the Manis. -DrewZilla *www.revzilla.com/motorcycle/dainese-pro-armor-g-back-protector *www.revzilla.com/motorcycle/dainese-manis-d1-g-back-protector-insert
I'm guessing that was a G1 size in the G2 pocket; I have this jacket with the (just arrived here yesterday) Pro Armor G2 and it fits perfect. There are two pockets for either the G2 or a smaller protector (though I don't understand why).
Hi RevZilla :) Hi :) My chest 105cm and armlengt is about 60cm and my height is 184-185cm ... which one would fit me more the 52 or 54 ... My friend has the 50 but its too short on the torso.. Can you please tell me whats the lengt difference betweem the 50-52-54 from neck to the belt? So i can order one :) thank you :) I also posted this question on your webpage but forgot my height ... you would help me a lot :)
It would really depend on your chest measurement and not height and weight, like most garment or suit fittings. However, keep in mind that Dainese is a slim/Euro fitting company that doesn't usually work for those riders a bit larger in the mid section like you and I. If you want to chat further about sizing though, reach out to our Gear Geeks at cs@revzilla.com or 877.792.9455 to talk through your options. They will be able to help you a lot easier/faster than this RUclips comments section. Ride safe! - Pat
It depends whether you want a hot-weather jacket or a mild- and cold-weather jacket. Both have similar protection, but the Air Frame has mesh panels for good hot weather ventilation, while the D-Frame has full textile and a removable thermal liner for mild and colder weather. You should decide based on your riding conditions. -DrewZilla *www.revzilla.com/motorcycle/dainese-air-frame-d1-jacket *www.revzilla.com/motorcycle/dainese-d-frame-jacket
It's an evolution of the previous version, not a radical redesign. The new jacket does have better abrasion resistance as well as more reflective material for safety. -DrewZilla *www.revzilla.com/motorcycle/dainese-air-frame-d1-jacket
How can you know this version has better abrasion resistance when Dainese doesn't seem to release any data on their materials? Did the reps simply tell you it was?
Seems very fishy to me that companies like Alpinestars and Rev'it are completely willing to tell us what kind of materials they use in their jackets, not Dainese though. I like their jackets can you give me any information as to why I should feel safe in one as opposed to those other brands?
No, this jacket is not waterproof. It's a mesh jacket for lots of summer ventilation. Dainese jackets with waterproof liners have "D-Dry" in the name. For Dainese's mesh jackets with removable waterproof liners, see the options below. -DrewZilla *www.revzilla.com/motorcycle/dainese-super-rider-d-dry-jacket *www.revzilla.com/motorcycle/dainese-dinamica-air-d-dry-jacket *www.revzilla.com/motorcycle/dainese-hydra-flux-d-dry-jacket *www.revzilla.com/motorcycle/dainese-corbin-d-dry-jacket *www.revzilla.com/motorcycle/dainese-hyper-flux-d-dry-jacket *www.revzilla.com/motorcycle/dainese-sauris-d-dry-jacket
You cannot purchase a Dainese liner by itself, but you could use almost any wind/rain liner. Here's an affordable option. -DrewZilla *www.revzilla.com/motorcycle/oxford-melbourne-rain-jacket
Yes, this jacket comes with Shoulder/Elbow armor and a pocket for the back protector to be added later if desired. If you have any other questions or concerns, please feel free to contact our Gear Geeks at 877.792.9455 or cs@revzilla.com. - Pat
The Air Frame D1 uses stronger mesh and stronger textile, which is why it's slightly more expensive. That's really the difference. I would spend the little bit extra for the Air Frame D1. -DrewZilla *www.revzilla.com/motorcycle/dainese-air-frame-d1-jacket
just got this jacket and love it! I decided to go a size up because they were out of my size. I'm 5'10 150 pounds, and the 52 actually fits great, its slightly loose but with the button adjusters and a back insert, that picks up the slack. Also the sleeves don't climb up my arms in the tuck position as many are claiming. Would buy this jacket again, its a must have on a hot day. Recommend the pro armor back protector over the manis for breathability
I'm 5'11" 170lbs with a 42" chest, the 52 was good for me, this is one of the sharpest jackets I've seen
Classic racey style passes well for leisure wear, not often an option with Dainese. Plus the attention to detail on this leave no room for improvement, as far as I know anyway. Also, these reviews / breakdowns, are rapid and don't miss anything, I ended up watching em more then I needed to, just for the vibes. Thxs, couldn't have 'decide n ride' without it.
I own this jacket, great jacket. Good protection and very comfortable. I am 5'9 150lbs and I wear size 52, fits perfectly
Im 5'3" and Im wearing the same size as you. Imagine how I look LOL.
@@TomsCornerph i am 1.70 height and weight 70/73kg, what size do you recommend? I would like it to dress like the person in the video, not too large, it fits right, what size is best for me? 48 or 50?
@@JT7POV I would go for 50
I have to remember I’m a bit long in the arms and torso should have went a size bigger than hi-viz Brian. Nice jacket though just a bit short
Somehow i bought this today, size 56 and it fits me perfectly. 6'1" 220 lbs, 41 inch at the chest... i guess i got some kind of wide shoulders hehe
same here, lol. and i'm 6'2 230lbs, 44 chest. im between a 56-58 in Dianese. but i guess because its so light it has more room
Me too..6’1” and size 56 fits perfect
Does this jacket have matching pants? I'd so can someone post the link, thanks
The Dainese “3D Mesh”... what is that made from? Is it a Cordura nylon mesh, or a Polyester/Polyurethane material? The price point honestly worries me a bit... at that price, mesh tends to be poor at thermal friction resistance, cheaper material that melts in a slide. Nasty nasty skin grafts. Any crash testimonials with this jacket?
The mesh is polyester, while the (non-mesh) textile is nylon. -DrewZilla
check the motocap ratings, no abrasion resistance.
Hi..i'm 6'1 but 34 in chest..what size would fit me?
A size 46 would fit a 36" chest measurement, although since you are taller it might run short in the arms and torso, as that is how Dainese cuts their sport jackets. But, based on your chest (which is the most important measurement), a size 46 is likely the closest proper fit.
@@RevZilla thanks
Hey, I'm considering buying the Fluo Red version of this jacket, but I'm afraid it might be too orange for me. Since my bike is black and red, I don't want the colours to clash.
I've never seen one live, so I'm hesitating. What do you think?
The Fluo Red is halfway between red and orange, so I wouldn't recommend it for a bike that's pure red. -DrewZilla
@@RevZilla its a Benelli BN302. Black with red chassis. Still undecided. I'm gonna try and see it live. Thanks!
Эти куртки все по пояс ? Типа фасон такой или есть ниже пояса ?
The Air Frame line from Dainese is more sportbike oriented and has a shorter waist cut to match.
hows this compared to the hyper flux d-dry jacket? noticed that the hyper flux is priced higher but see more features with jacket?
The extra cost of the Hyper Flux is for the waterproof D-Dry liner and molder shoulder details. If you don't need the waterproof liner, the Air Frame is definitely the better value. -DrewZilla
*www.revzilla.com/motorcycle/dainese-air-frame-d1-jacket
*www.revzilla.com/motorcycle/dainese-hyper-flux-d-dry-jacket
is the protection inside the fabric on this jacket like the hyper flux instead of Velcro?
The Hyper Flux and the Air Frame D1 use the same composite protectors (armor). -DrewZilla
Is this abrasion resistant?
i am 1.70 height and weight 70/73kg, what size do you recommend? I would like it to dress like the person in the video, not too large, it fits right, what size is best for me? 48 or 50?
height 5'7, weight 160lb, size correct 48 or 50?
Chest < 37in go with 48, if >37in go 50
Assuming you'll use back protector
I am 5'8 and weight 135. I am an athletic build but have a less than 38 chest, what size would yall recommend?
According to Dainese's sizing chart you should be in either a 46 or a 48, so we would recommend trying either of those two sizes on before you finalize your decision.
Sizing on these are weird then, I have a size 54 and I'm 5'10 and 187lb and it's a snug fit on me.
If you have a 43-44 inch chest size, then 54 would be an appropriately snug fit. -DrewZilla
@@RevZilla Thanks, would that also be the case for the Dainese Settantadue Prima 72 leather jacket?
hi revzilla, i am 176cm tall, 61kg and 35 inch chest. what size will fit me for Dainese Air Frame D1? thanks
У меня рост 173 и вес 62 кг куртка 46 размера, но она по пояс как будто короткая или они все такие. Думаю 48 для меня была бы большая
what would happen if you body slam the floor by accident?
As opposed to...intentionally?
this is still on preorder. any information on when itll be in stock?
Yes, it's still on pre-order, but we expect it to come into stock early-March. -DrewZilla
*www.revzilla.com/motorcycle/dainese-air-frame-d1-jacket
Armor on elbow and shoulders are CE rated level 1 or 2?
It's CE Level 1. For Level 2 from Dainese, consider the Bora Air. -DrewZilla
*www.revzilla.com/motorcycle/dainese-bora-air-jacket
@@RevZilla The Bora air description says CE level 1, am I missing something?
hi. jacket size fit me well. but if ride at higher speed over 70mph. the fabric on my shoulder will flap a lot and make annoying noise. is this same for others?
How does this compare to the Air Master, protection wise?
The Air Master offers slightly more abrasion resistance compared to the Air Frame D1. Both use the same shoulder and elbow armor. -DrewZilla
I actually want this jacket- I’m 6’6 tho
Any one have any suggestions? I have a scorpion exo in 2xl tall right now but they r hard to find
If you would like this jacket, you can reach out to Dainese directly as they have a custom-sizing option directly from their factory for your height. We also have a Big & Tall Guide that might be able to help you as well.
ruclips.net/video/9Ibi_-mKm1I/видео.html
the back protector looks crooked in the video. is this a quality control issue?
No, it isn't a quality issue. The Pro Armor G back protector is just slightly narrower than the back protector pocket. For a larger back protector, consider the Manis. -DrewZilla
*www.revzilla.com/motorcycle/dainese-pro-armor-g-back-protector
*www.revzilla.com/motorcycle/dainese-manis-d1-g-back-protector-insert
I'm guessing that was a G1 size in the G2 pocket; I have this jacket with the (just arrived here yesterday) Pro Armor G2 and it fits perfect. There are two pockets for either the G2 or a smaller protector (though I don't understand why).
Im 5'6 foot and 75kg. I dont know my measurement of my body. I wonder what my size would be?
Without getting your own chest measurement, it's pretty hard for us to say as well. -DrewZilla
Hi RevZilla :) Hi :) My chest 105cm and armlengt is about 60cm and my height is 184-185cm ... which one would fit
me more the 52 or 54 ... My friend has the 50 but its too short on the
torso.. Can you please tell me whats the lengt difference betweem the
50-52-54 from neck to the belt? So i can order one :) thank you :) I also posted this question on your webpage but forgot my height ... you would help me a lot :)
I recommend size 52. 54 would be too loose. The difference in height and arm length is about 2cm per size. -DrewZilla
6'1" 250 lbs, beer belly, what size should I go for?
It would really depend on your chest measurement and not height and weight, like most garment or suit fittings. However, keep in mind that Dainese is a slim/Euro fitting company that doesn't usually work for those riders a bit larger in the mid section like you and I. If you want to chat further about sizing though, reach out to our Gear Geeks at cs@revzilla.com or 877.792.9455 to talk through your options. They will be able to help you a lot easier/faster than this RUclips comments section. Ride safe! - Pat
Can i use the Pro Armor kit (elbow and shoulder) with the Air frame A1?
Since the Air Frame uses Velcro to hold the composite armor in place, the Pro Armor cannot be used. -DrewZilla
RevZilla thank you!
You're welcome.
@@RevZilla Can the pro armor elbow be used in this jacket? Isn't the elbow armor held in a pocket? Thanks
Sea bass Brian almost looks real 😳
Which is better this or the d frame jacket?
It depends whether you want a hot-weather jacket or a mild- and cold-weather jacket. Both have similar protection, but the Air Frame has mesh panels for good hot weather ventilation, while the D-Frame has full textile and a removable thermal liner for mild and colder weather. You should decide based on your riding conditions. -DrewZilla
*www.revzilla.com/motorcycle/dainese-air-frame-d1-jacket
*www.revzilla.com/motorcycle/dainese-d-frame-jacket
@revzilla can you suggest me a all season dainese jacket which can i use in summer and winter?
similiar to previous air frame jacket..is it new innovation in this model?RevZilla?
It's an evolution of the previous version, not a radical redesign. The new jacket does have better abrasion resistance as well as more reflective material for safety. -DrewZilla
*www.revzilla.com/motorcycle/dainese-air-frame-d1-jacket
How can you know this version has better abrasion resistance when Dainese doesn't seem to release any data on their materials? Did the reps simply tell you it was?
The increase in abrasion resistance isn't due to new materials but rather having more full textile and slightly less mesh. -DrewZilla
Seems very fishy to me that companies like Alpinestars and Rev'it are completely willing to tell us what kind of materials they use in their jackets, not Dainese though. I like their jackets can you give me any information as to why I should feel safe in one as opposed to those other brands?
Какие штаны к этой модели подходят?
Any Dainese pants w/ the matching zipper length (ie Full circumference or short zippers) will match with the Air Frame.
@@RevZilla Спасибо!!!
Hi,
I'm 5'11 and my chest is 40''. Which size fits me? And my second question, what is that model size? Thanks already
Sorry i didn't realize, his wear 52..
Correct, the model is wearing size 52, and you should likely be size 50. -DrewZilla
*www.revzilla.com/motorcycle/dainese-air-frame-d1-jacket
Is this jacket waterproof?
No, this jacket is not waterproof. It's a mesh jacket for lots of summer ventilation. Dainese jackets with waterproof liners have "D-Dry" in the name. For Dainese's mesh jackets with removable waterproof liners, see the options below. -DrewZilla
*www.revzilla.com/motorcycle/dainese-super-rider-d-dry-jacket
*www.revzilla.com/motorcycle/dainese-dinamica-air-d-dry-jacket
*www.revzilla.com/motorcycle/dainese-hydra-flux-d-dry-jacket
*www.revzilla.com/motorcycle/dainese-corbin-d-dry-jacket
*www.revzilla.com/motorcycle/dainese-hyper-flux-d-dry-jacket
*www.revzilla.com/motorcycle/dainese-sauris-d-dry-jacket
Bought this last year, unfortunately I lost my windproof liner on a jorney, is there a way to purchase a spare one. Please let me know Rewzilla !
You cannot purchase a Dainese liner by itself, but you could use almost any wind/rain liner. Here's an affordable option. -DrewZilla
*www.revzilla.com/motorcycle/oxford-melbourne-rain-jacket
so what kind of protectors come with the jacket? just shoulder and elbow?
Yes, this jacket comes with Shoulder/Elbow armor and a pocket for the back protector to be added later if desired. If you have any other questions or concerns, please feel free to contact our Gear Geeks at 877.792.9455 or cs@revzilla.com. - Pat
This one or the air crono 2? and could you explain me why?
The Air Frame D1 uses stronger mesh and stronger textile, which is why it's slightly more expensive. That's really the difference. I would spend the little bit extra for the Air Frame D1. -DrewZilla
*www.revzilla.com/motorcycle/dainese-air-frame-d1-jacket
Def not for tall guys, he’s 6’1 and it doesn’t cover his belly button
For a skinny rider would this be good.
Yes, this is good for skinnier riders. -DrewZilla
*www.revzilla.com/motorcycle/dainese-air-frame-d1-jacket