Reminds me of moving with my rusted '94 S10, shocks were shot, bed had rot, floor boards gone, no front brakes and the iron duke. I had never been more terrified and excited as going down hill with 1,500 pounds of belongings in that thing
Rhubarb Pie This was me with my half ton 1996 F-150 loaded with well over a ton of stone 😂. The suspension was so compressed the loosely dangling exhaust was hitting on the driveshaft even more than usual. Stopping is a chore with more than 1,000 lbs in the bed, let alone the 2,400-2,500+ I had.
I had a 1981 6 cylinder dodge half ton loaded like that with firewood and tried to go over the hill with it it got about 2/3 the way up and sat there in the floor not moving or spinning..painful
3200 ftlbs to the diff? that diff would be GONE along with the transmission im amazed the engine handled the several seconds of nitro and the short bursts to
Get it. It’s a bit rough to low end PCs but it’s definitely worth it. While you’re their grab automation. You can make cars and engines and bring them to beam ng
grab them with the node grabber or place them right in the bed with the editor. you can also attach nodes with each other. so you can strap down the load. for node grabber hold ctrl and grab the nodes with the mouse. with the mousewheel you can adjusting the strenght
![Stromae, Pomme - “Ma Meilleure Ennemie” (from Arcane Season 2) [Official Visualizer]](http://i.ytimg.com/vi/1F3OGIFnW1k/mqdefault.jpg)
Reminds me of moving with my rusted '94 S10, shocks were shot, bed had rot, floor boards gone, no front brakes and the iron duke. I had never been more terrified and excited as going down hill with 1,500 pounds of belongings in that thing
7:48. Houston! We have a problem.
This is an accurate representation of me driving my Mazda B2300 with the bed loaded above the sides with firewood 😂😂😂
😂😂
That was hard to process
I remember hauling a load of firewood in the back of my 01 frontier 4x4 s/c with nearly shot shocks, I can only amagine how painful that was.
Rhubarb Pie This was me with my half ton 1996 F-150 loaded with well over a ton of stone 😂. The suspension was so compressed the loosely dangling exhaust was hitting on the driveshaft even more than usual. Stopping is a chore with more than 1,000 lbs in the bed, let alone the 2,400-2,500+ I had.
I had a 1981 6 cylinder dodge half ton loaded like that with firewood and tried to go over the hill with it it got about 2/3 the way up and sat there in the floor not moving or spinning..painful
911 what’s your emergency? WERE IN *AUSTRALIA!*
This guy could not have guessed 😂
@@vector3998 he means its upside down
The last time I used one of these vehicles normally, the motor caught fire... xD
😂
3200 ftlbs to the diff? that diff would be GONE along with the transmission im amazed the engine handled the several seconds of nitro and the short bursts to
Video idea: do the same thing but with a pidgeon towing a trailer full of boulders and giving it the best engine possible.
best engine possible is kinda debatable
you can swap in a truck motor in that thing with mods.
Suggestion: Make a high rev inline 4
It's not that hard.
Edit the jbeam and done
Hehe vtec go brrrr
Every Puerto Rican I know, including my own family abusing a ford ranger
i loaded 5 tonnes rock in the Gavril D with stock setup to see if it can still move.The problem it's that it is hard to tie the load to the vehicle
Lol when u enable nitro and it makes a wheelie😂😂😂
damn that thing needs a higher final drive lmao
How do i do that on the top left???
Customize UI apps
I like that bump
And the suspension
as you do to put stones, boxes these things in the car body.
Am just too high to read this right or is this kid's grammar just terrible?
Fuel consumption 300L/100 km
Oh waw thats a little to much
Do a brake test
What a beauty dude!
Looks like a 1st gen Toyota Stout
Satsuma? Pickup truck?
how did u get that engine power tab on the left corner?
it's an UI, you can get it from where you get the measures and etc.
Make videos like this again ... I like videos like this
Clarksoooooon
Great video! How do you load objects in the bed of the truck? Can anyone help me with this??
Automatic transmissions...
Rex Jolles it says “d” indicating drive but ok
Rex Jolles it actually says “automatic 3 speed” but ok
Diesel or gasoline?
Bitelaserkhalif 555 dasoline
Its obvliusly petrol cuz diesels dont revv that much
@@Gabriel-he6ih there are high revving diesels :P
@@Gabriel-he6ih all.ive seen is 3-4k rpm my cummins does that
0:35 kg and lb are very interesting
Imagine if its 2001
Oh no
Can you simulate DSG transmission?
The must cute truck i have see
Grammar!
Most not must
Satsuma for the win
This game can single handily bankrupt ATS if it wanted to...
Ats?
American truck simulator
This game could single handedly bankrupt every driving game ever made if it wanted to.
Datsun 320
7:44 ... mi viejo me va a matar!!! :,,,v
#Argentina is leaking
Is it okay to be satisfied by this? Lol
CVT transmission?
No. It’s an automatic. Just under heavy load. 2:00
try using the reduced gears
Almost 200l/100km insane without nitrous xDD
I hate that transmission, it's almost a CVT
automatic 3 speed (4 speed?)
@ES RC not in the reliability aspect.
11:01 Car wheelie
How do tou put rock inside a pick-up ?
You have to enter the world editor by pressing F11 and then drag and drop. Make sure you're in free camera mode when you do it.
@@ForgottenMustard its too dificult for me i am lazy guy
brefarm 44 use the mode grabber.
*node
@@ForgottenMustard do a Lamborghini V12 Swapped Satsuma Pickup?
Hello nice video, can you help me, how can i put rocks on the back of a pick up, they are to heavy to move with the mouse...
Press F11 to enter the world editor and then move them with the mouse.
@@ForgottenMustard Genius!
don't forget to increase the force when you lift stuff with the mouse
@@emmanueldenniss how do you do that?
@@Note232 you need to use your mouse wheel to increase force. Default it is 30% i guess but you can take it up to 100% to lift heavier things
How do you get them stones back on the bed
Enter world editor + free camera then drag and drop.
Whitewall tires are too soft.
Love your work bro
Whats your config ?
Nice
good mod
What is the map that used in this video? It's a mod? Pls, if yes, can you link me the mod of the map pls? Thanks bro
First map is Small island, USA and second map is Automation test track
A Honda Pilot could probably tow that rock.
maybe
Interesting
Nice!
Where can I download this car scale?
No download, it's been in the game since the 0.9 update, 2 years ago.
@@ForgottenMustard thanks for answer, i think i need to reinstall my game cuz i cant find it
Can u make moreeee video like this plsss😂😙
3000L/100km🤨
Hi
What is the name of this games and can you pliss tell me how to download it??? Anyone?
BeamNG Drive. You can find it on Steam.
Get it. It’s a bit rough to low end PCs but it’s definitely worth it. While you’re their grab automation. You can make cars and engines and bring them to beam ng
Name of this game
Game name pls?
Can it be played in android
No. PC only.
Oyunun adı nee?
I do this in real life
Как камни загрузить?
В ворк шопе смотрел?
Жмешь ctrl кликаешь на мышку и колесом мышки можешь регулировать поднятием камней
Queria saber como que coloca as pedra encima do automóvel.
Satsuma é o antecessor do GT.
Spacchiu i Fiat 1100 furgonetta vaginale
+
It sounds like a Cummins😂😂
Not at all
Disrespectful and against community guidlines
How is it against community guidelines?
How can you put rocks in a car
Simple, hire a JCB to do the work 😁
grab them with the node grabber or place them right in the bed with the editor. you can also attach nodes with each other. so you can strap down the load. for node grabber hold ctrl and grab the nodes with the mouse. with the mousewheel you can adjusting the strenght