How to Replace Crankshaft Position Sensor 1999-2007 Chevy Avalanche 1500 or any 5.3 LS Engine
HTML-код
- Опубликовано: 21 окт 2024
- In this video we replace the leaking crankshaft position sensor on the 2002 Avalanche.
It's the same on all Chevy vehicles with the 5.3 LS - engine from 1999 to 2007. Silverado, Suburban, Yukon,...
🛠️🧰👨🔧🔩⚡ TOOLS, PARTS & MATERIAL USED IN THIS PROJECT: 👨🏭⚙️🔧🧰🔨🔦⚡
ACDelco GM Original Equipment 213-354 Engine Crankshaft Position Sensor: amzn.to/3KKPESn
DI-ELECTRIC GREASE-3.3 OZ. POWER DISPENSER: amzn.to/43iQoVV
10mm Ratchet Wrench SLIM DESIGN 10mm Wrench: amzn.to/3UnkfIB
CRAFTSMAN CMHT65073 CFT SD BI-MATERIAL 4PC PRECISION, Red: amzn.to/3KLS0Au
CRAFTSMAN Utility Pry Bar Set, 3 Piece, 12”, 18” & 24”: amzn.to/3GvF1QF
Torque Wrench1/2-inch Drive Click, 10-150: amzn.to/3hcg4ju
Ratchet Contour Handle 3/8-inch Drive x 9-inch Long Reach: amzn.to/35xZD8V
DEWALT 20V MAX XR 1/2-Inch Impact Wrench Kit: amzn.to/32GyyP5
DEWALT 20V 1/4 In. Impact Driver Kit: amzn.to/36EBoFd
DEWALT Drive Socket Set, SAE/Metric, 1/2-Inch, 23-Piece: amzn.to/3lUKxjn
Heavy Duty Wheel Chock, (Pack of 2): amzn.to/3E9Qg0H
Jack Stands Steel (Fits: SUVs and Extended Height Trucks): amzn.to/3lPFbWN
Ramp Set 6.6in Car Lift, 5 Ton Heavy Duty Truck Ramps: amzn.to/33ag6hQ
Degreaser ZEP Industrial Purple: amzn.to/36P3o9y
WD-40 Industrial-Strength Cleaner & Degreaser, 24 OZ Non-Aerosol Trigger: amzn.to/3eqSmwC
Permatex 25217 Fast Orange Pumice Lotion Hand Cleaner, 1/2 Gallon: amzn.to/3l1Y4q3
🛠️🧰👨🔧🔩⚡YOU MAY WANT TO CONSIDER THE FOLLOWING: 👨🏭⚙️🔧🧰🔨🔦⚡
Mass Air Flow Sensor Fuel: amzn.to/3LivPkH
“As an Amazon Associate I earn from qualifying purchases at no extra cost to you.”
Although this crankshaft sensor was changed because of it leaking;
The crankshaft is one of the sensors your vehicle's computer uses to ensure its engine is running properly. A failed sensor could be a danger to your engine, and should be replaced. This video shows you how to install a new crankshaft position sensor on your 1999-2007 Chevy Silverado.
Symptoms
Engine light on and code comes up with P0335.
No start, acceleration issues, rough idle, and poor gas mileage.
Leaking oil from o-ring
This process should be similar on the following vehicles:
1999 Chevrolet Silverado, Avalanche, Suburban1500
2000 Chevrolet Silverado, Avalanche, Suburban1500
2001 Chevrolet Silverado, Avalanche, Suburban1500
2002 Chevrolet Silverado, Avalanche, Suburban1500
2003 Chevrolet Silverado, Avalanche, Suburban1500
2004 Chevrolet Silverado, Avalanche, Suburban1500
2005 Chevrolet Silverado, Avalanche, Suburban1500
2006 Chevrolet Silverado, Avalanche, Suburban1500
Tools you will need:
• Pry Bar:
• Socket Extensions:
• Torque Wrench http:
• Dielectric Grease
• Gloves http:
• Safety Glasses http:
See REPAIRS 5.3 LS CHEVY VORTEC 1500 AVALANCH Playlist for more;
• HOW TO REPLACE STARTER...
In this video we replace the leaking crankshaft position sensor on the 2002 Avalanche...
It's the same on all Chevy vehicles with the 5.3 LS - engine. Although this crankshaft sensor was changed because of it leaking;
The crankshaft is one of the sensors your vehicle's computer uses to ensure its engine is running properly. A failed sensor could be a danger to your engine, and should be replaced. This video shows you how to install a new crankshaft position sensor on your 1999-2007 Chevy Silverado.
Another good upload, thanks for sharing!
Not something I will likely ever do, but it was interesting to see how you replaced the crankshaft position sensor. I enjoyed in full to the end. Thank you, my friend.
Thanks Dave👍
Great tutorial! I really appreciated the clear and concise explanations, as well as the visuals to help demonstrate the steps.
Thank you for taking the time to create and share this video. It'll be very helpful for so many!👍
Thank you. Glad you enjoyed it!
Great job John, nice tip about the oil to tell if the sensor isn't working, think I got that right. Awesome as always.
Thanks Dennis👍
Awesome how to tutorial John & son on replacing the crankshaft position sensor. Have a great Easter weekend! 👍
Thanks, you too!
Good to see it works for all those models and years! Great repair work done! Thanks for sharing your expertise! Have a good day John!
Thanks, you too!
I just did this, it was less than an hour, I’d say.
Last time, I removed the starter b/c I didn’t know any better, and that probably took the most time. I’m also in an air boot recovering from a broken foot.
Glad it helped! Thanks for the feedback.
Thanks for sharing.. Hope you and your family had a good Easter..
Thank you! You too!
Thank you for this as I have the same issue on my '05 Avalanche leaking. I just wanted to confirm because I could not find any other leads as to this particular replacement part (ac delco 213-354) on the internet not needing to be relearned. Appreciate the feedback
The best suggestion I can give you is to visit an O'Reilly Auto parts store They are really nice people on the phone too, or go on their website.
Nicely done John.
Thanks!
Hi John! Great video as always, dear friend.👨🏭⚙🔧🧰🔨🔦👍
Happy Easter to you and family.
Ciao....Elio
Good morning Elio. Many thanks! Hope you having a great one.
CAN A LEAKING CRACKSHAFT SENSOR ON A 2003 AVALANCHE BE CONFUSED FOR A LEAKING REAR MAIN SEAL?
Any leak from that area can be mistaken for something else.
The way we look at it is, either way they have to be fixed and in the process of elimination you'll find out the next leak if any... Good luck..
Thank you for the update message.please how do I know my crankshaft sensor is bad
Engine light on and code comes up with P0335.
No start, acceleration issues, rough idle, and poor gas mileage.
Nice! I'll be using this video also thank you sir
Good luck and be safe
Спасибо большое за интересное и полезное видео! Самые добрые пожелания!
Thank you.
I think that the crankshaft position sensor O ring is leaking in my 5.7 litre Chevrolet LS1 V8 engine in my 2002 model Holden VY SS Commodore so I am probably just going to replace the O ring with a 14mm ×19mm O ring quick is 2.5 millimetre thick in the metric measurement or 9/16"×3/4" O ring which is 3/32" thick in the imperial measurement.
I have a couple of O ring kits which has a suitably sized O ring !
Cool! Let me know how it works out. Thanks for the back.
Will this work on a 2007 GMC Yukon? (Regular Yukon)
Some guy used it on a 2003 Silverado LS, 4.8Litre V8 no issues....
Amazon gives you the option to choose the vehicle.. it will tell you if it fits....
Question, in a 2002 chevy avalancha ,4×4 ,2500 engine 8.1
Is in same position ?
My app says the 8.1 uses this one... amzn.to/3OHPJaL
this was an interesting project my friend nice work John
*left a like👍Au💯full view always💢*
Many thanks Billy 👍
Be well.
Good job my friend! 👍Greetings
Thank you Very much. Have a great Sunday.
good video John👍Gary
Thanks for the visit Gary!
I've ben trying to get teh starter out of the way to get to the sensor for over 30 min, cant get it back, sideways, up, anyway at all... its a 2001 Silverado 4x4 with the 5.3L LM7 engine... there is no run to pull it back at all, or at any angle. wire harnesses wrapped around it and behind it, along with some sort of shroud on the top of the starter
Wow! I cant imagine it being tighter than 2 wheel drive but then I never had yo remove one from a 4X4...
The "shroud" is the dust cover and can be removed to make it easier to wiggle the starter out.
@@JohnCRV thanks for the reply! I spent about 3 hrs yesterday trying to get it removed without any success. I will keep trying this morning. There just isn't any wiggle room at all that I can find. Needs about an inch to clear the gear housing and can't find that room to get it of the way 🙄 on any direction... very frustrating
@@elianselmi4099 Hope you get it out.
Yo can replace any parts of this car?
Almost. Thank you. Glad you enjoyed it!
Amazing, thanks for sharing!!
Thanks.
Well I had replaced that cuz that's what it said replace crankshaft sensor I did but at the same time it had low voltage read and it said crankshaft sensor so I changed it and nothing's really changed what's causing that I wonder
Sorry, but You need to be more clear.
MNIO AMICO CARO CARISSIMO MIO JOHN CON MIO CUORE UN CAROI SALUTO DALLA NOSTRA ITALIA E SICILIA PER TE MIO CARISSIMO AMICO grazie per il tuo bellissimo importante e interessante come sempre video e perr la spiegazione e sostituzione del sensore io ho capito perdonami se mi sbaglio con mio cuore un caro saluto con affetto e amicizia tuo amnico giuseppe🛑🚧🚦🚥🚄🚋🚋🚋🚋🚋🚄💈🍫🍫🍫🌵🌻🌻🌻🌵🍫🍫🍫
Buongiorno Giuseppe. Sì, questo video spiega come cambiare un sensore di frenata ABS su una Jeep e come spegnere le spie nel quadro strumenti. Grazie per il bel commento.
Fantastic! Like 58.
Thank you! Cheers!
What us the sensor @1:46
That's a knock sensor...
*_Interesting video dear friend John, thanks for sharing and greetings from Greece!_* 😍😍
Many thanks. Happy Easter.
Great Work!
Thanks for the visit! Happy Easter Bob. 🙏