@@chrisplunkett2814 that's not true, your nano VNA measures the resonant frequency of the antenna with a very low transmission of signal. The resonant frequency is the frequency at which an antenna receives or transmits, it doesn't matter. Also the tiny signal the nano vna puts out is in the milliwatts and wont blow a recieve only antenna.
@@dustinmcdermont699 The nano vna is temperamental as hell. Even holding it differently will cause nanovna measurements to flake out. You have to calibrate a nano vna _every_ time you want a measurement, unlike a more robust analyzer like a RigExpert stick.
Discone antennas have very interesting wide band properties, this seems like a nice bit of kit, I use a Diamond discone, although a bit larger than the one profiled here, cheers, n yr videos are outstanding
wide band...but no gain! I too own a Diamond discone, only useful for close communications (and more remote air com). Because I'm more interested in the 135-470 band and love in the deep country (few local transmissions), I built a log periodic antenna tailored for this band. Dramatic results (6-8 db gain / discone). Only weakness : somewhat directive.
I haven't tested this antenna but I love it's performance. I first heard of this antenna back in the '80's in Popular Communications Magazine. The Skyscan Desktop is now being marketed by Whistler here in the states.
Nice antenna - always toyed with the idea of purchasing one of these. I use a Sirio S2000N here externally and that works really well over its frequency range of 100 - 2GHz.
I have the Whistler brand version for a couple of years, and it works quite well for scanning, and on the amateur vhf-uhf amateur radio bands here. Ray W2CH New Hampshire.
That antenna is very similar to the “ Super Scanner “ I use to have on my roof back in NYS. I now use a Ringo Antenna. It is very light and 7’ tall. Nothing escapes me anymore..
I have been using one of these discone antennae for several years on the rear of my motorcycle for many tens of thousands of kilometres. During assembly l used LOCKTITE on all threaded parts and not one has come loose. I also use LOCKTITE on my fixed position antenna because l live at 8,000 feet and the wind can shake threaded components loose. Only one component has failed on the discone antenna and that was one of the "rubber duckie" antennae, and l don't know what the specification is. The manufacturers didn't respond to text enquiries, despite several attempts.
As an Rx only antenna one could possibly use it as QRP at less than 5watts. It would be worth a try. I have something along the same path that was made by Niljohn in the States some 20 years ago( they have been since acquired by a company that manufactures military multiband antennas) and it covers a wide range between 2meters all the way up to 800 MHz and can handle up to 50 watts. It consists of three "verticals" of different lengths set at 120° apart from each other and at about 30° off of the vertical axis. It is designed for mobile use although a bit crazy looking for the average ham antenna.
Subgunman, I too have the Niljon Classic. It's mounted on the bonnet of my Jeep. It provides very good low earth orbit FM repeater satellite coverage as well as good terrestrial operations from the mobile. I just acquired its big brother the Niljon Ultra which sports six "verticals" of varied lengths set 60 degrees apart and also 30 degrees off the vertical axis. I bought the home station version with the required groundplane elements. It has a nearly flat SWR from 88 MHz continuously through 6 GHz. I plan to use it on the various ham microwave bands in addition to the usual 2m, 133cm, 70cm, 33cm and 23cm bands. 73 de W6NOB
Picked this up fairly recently. I was pretty surprised at what I've been able to recieve so far. I'm near the cost and can pick marine traffic up at 40ish miles, plenty of air traffic from Ireland and England, even hams from Devon way (I'm from Wales). All that from using it indoors. I'd put it outside on a good day but wouldn't leave it out.
I have one of these Antennas. I was not happy with the coax so I changed it to RG mini XX all so wanted it longer but with out a join.to get to the in side plug it has to be warmed up ware the plastic fits in to the metal of the Antenna but remove the base and the top of the Antenna be careful when warming up the Antenna don't get to hot because the plastic tube will go floppy it would be easier if some heats it and another pulling it until it comes apart.i fitted 20-meters on mine RG mini 8 xx.when fitting the tube back in the metal Antenna gust use some Epoxy but only on the last 10mm of the tube.one thing if you got a watch on take it off because the magnet will kill your watch.i bought 15-inch of plastic tube because I wanted it a bit higher from the base.it won't ever go on a car because its would or mite come off.the RG 8 mini XX has made a difference .well worth doing.happy scanning
@@MI7DJT I've modified my POCSAG file to this 'nc -l -u localhost 7355 | sox -t raw -esigned-integer -b 16 -r 48000 - -esigned-integer -b 16 -r 22050 -t raw - | multimon-ng -t raw -a FLEX -e -f alpha /dev/stdin' and listen to UDP coming out of GQRX on the Pi. Works great. Thanks
I wish we had something similar available here in Australia. I would order one of these from the UK but I just looked online they are sold out everywhere...
Thanks for the video. Very informative. I went to your Amazon storefront to purchase it, but I only see the Tram 1410. Is the Skyscan Desktop still available?
Interesting vid as I have the exact antenna, well I say antenna, I have the vertical antennas on the base but none of the radials and don't have the 4 wound radials at the base. I couldn't bring myself to bin it, I'd like to fabricate the radials plus the 4 small ones around the base, there lengths ...Great vid
Funnily enough I did do this and then totally forgot to include in the video. I’ll reply again when I have uploaded the screen shot somewhere for you all to see.
If you can find a copy of Openear, especialy the one that didn't have tetra removed, it is waaaay better that dsd+, you can pinpoint transmissions with sdr sharp and get the mode automatically decoded but as far as the quality of decoded voice/audio goes, no match.
Comparing to the Diamond D130J which covers 25 to 1300MHz,this antenna has much shorter ground plane elements.I doubt if it can work well on frequencies lower than 100MHZ
thanks for this very informative on desktop antenna,I would like to get the screen frequency display you are using,can you advise me where to download it from and other use for it?thankyou.
My Flightaware is doing a cracking job at the moment, plenty of aircraft up there still, Everytime I look at least 30+. I'm guessing your coax was letting you down with that.
Hello. First of all, thank you for giving RF such a nice antenna. For people living in underdeveloped countries like me, getting these antennas is nothing short of a dream. I live in Turkey and 50 pounds is about 950 Turkish liras. For this, can you share the dimensions of the antenna if it will not be kept as a trade secret?
Often wonder what do folks actually use these for for listening to anything above 500MHz? Other than 1090 for ADSB is there much else to catch? I'd imagine if there is and its low power serious enthusiasts will be using something custom tuned for the job.
Hi Tech Minds. Love your videos, I have been trying to purchase 2 x of these & have them shipped to Australia without success. Just wondering if you are able to tell me who I might be able to purchase these through & have them shipped to Australia. Thx in Advance. Rgs Wayne.
Hi. I live ~13 miles from Heathrow and currently have a uniden EZI133XLT. I am considering buying this antenna to pick more traffic up coming in and out of Heathrow. Will it work from that range?
So would you recommend this for a digital trunking p25 scanner? I’m trying to increase my receive on my RadioShack pro 197 scanner. I also understand that overloading the front end is possible but it’s still worth a shot
That antenna -just looks wrong. No filters directing frequencies to matching whips. Would love a comparison of signal strength against a ‘normal’ dual band 2m/70cm whip
multiband dipole antennas like this are not omni directional. you might think on one band the rx is bad, but it could just be the antenna is turned the wrong way.
Great antenna, very cool. I would like to buy this antenna, to use in the SDR RECEIVER. but American imports are very expensive, the tax is very high, it is even more expensive than Antenna =( where can I buy a cheaper import fee? 🤔
Hi ... thank you for your Amazing Video ... Please send me the Link for the Software you used on your PC for the Frequencies Test you did ... awaiting your Reply ... Thank You
Exactly, but this antenna is marketed as a Desktop antenna. Which is why I also demonstrated using it outside. Unfortunately, not every one has the luxury of installing antennas outside.
The amount of adverts displayed is controlled by RUclips. Without the adverts I cannot put food on the table for my son and I. Thanks for watching and NOT blocking.
don't expect much from this antenna, have had it myself, nice for local traffic, but not really as good antennas for SDR or scanner receiver, and not for high freq, example 1090, it really won't work
I found this antenna to be very poor for the price and noticed I could receive signals without all the radials and whips attached and when attached the same signal was received with all the bits added there was no change in signal strength. No antenna in the world is capable of covering 25 to 2000mhz as it's totally impossible. I thought it was very poor for the price and found a slim jim cut for around 200mhz and a 3rd of the price massively out performed this discone.
Thanks for testing this, I've been undecided about getting this for a while now (I'm based in a very flat area not much above sea level). I think I might go for it. Did you say you just connected it to a BNC coax wire when you had it in your garden? How many metres just out of interest? Thanks.
hello friend i watched your videos posted on your channel with great interest. It seems that you have a lot of knowledge on this program. If you could dedicate your precious time to us, you would be very happy. How can we contact you?
Looks like an all around winner. Is it just a scanner antenna? Can't you transmit with it as well? I heard today that the U.K. was locked down, but I didn't know there was no air travel, right now! Hows that lock down working for everyone? Has the China-virus disappeared yet?
@@PureAwareness76 Why would the OP want to transmit from a discone? It's no better than a stubby rubber duck antenna. They should "waky waky" their antenna knowledge.
I can't see any advantage at all in combining a very poor discone , 4 rubber duckies rather than a top disk of the usual 8 (or more) rods, with a few vertical elements. It's a complete shambles of a thing. Not sure where they plucked 25Mhz from, but it's a marketing ploy. Advertising gurus making silk purses from sows ears. Try a wire coat-hanger, straightened out, cut in the centre and connected to the same length of co-ax. Not joking.
Maybe you could do a follow-up video with a SWR sweep over various frequencies?
Check the video description, I posted a link to a VNA sweep :) 👌
It's a receive only antenna,so no way of measuring SWR as you'd need to transmit through it to get these figures.
@@chrisplunkett2814 that's not true, your nano VNA measures the resonant frequency of the antenna with a very low transmission of signal. The resonant frequency is the frequency at which an antenna receives or transmits, it doesn't matter. Also the tiny signal the nano vna puts out is in the milliwatts and wont blow a recieve only antenna.
No real need for an SWR measurement, as this is just for receiving.
@@dustinmcdermont699 The nano vna is temperamental as hell. Even holding it differently will cause nanovna measurements to flake out. You have to calibrate a nano vna _every_ time you want a measurement, unlike a more robust analyzer like a RigExpert stick.
Discone antennas have very interesting wide band properties, this seems like a nice bit of kit, I use a Diamond discone, although a bit larger than the one profiled here, cheers, n yr videos are outstanding
wide band...but no gain! I too own a Diamond discone, only useful for close communications (and more remote air com). Because I'm more interested in the 135-470 band and love in the deep country (few local transmissions), I built a log periodic antenna tailored for this band. Dramatic results (6-8 db gain / discone). Only weakness : somewhat directive.
@@florentleider222 weakness? gain = directive. that's how gain works.
I haven't tested this antenna but I love it's performance. I first heard of this antenna back in the '80's in Popular Communications Magazine. The Skyscan Desktop is now being marketed by Whistler here in the states.
Definitely an interesting design for sure! One which will be around for many years to come.
Excellent work dude! I'll pick one of these up!
Why does having a brittish guy say anything make the video 10x more interesting haha nice video de ve7kfx !
And having a great equalization also helps!
Ikr 👍
I have this antenna mounted on my balcony, very pleased with it, i even pick up some HF frequencies! 73, Levi in Sweden
Nice antenna - always toyed with the idea of purchasing one of these. I use a Sirio S2000N here externally and that works really well over its frequency range of 100 - 2GHz.
Good test , Tha ka. To complete it, a hook up to the spectrum 600/1300 would have been gr8 to see where it actually resonates at.
I have the Whistler brand version for a couple of years, and it works quite well for scanning, and on the amateur vhf-uhf amateur radio bands here. Ray W2CH New Hampshire.
That antenna is very similar to the “ Super Scanner “ I use to have on my roof back in NYS. I now use a Ringo Antenna. It is very light and 7’ tall. Nothing escapes me anymore..
I have been using one of these discone antennae for several years on the rear of my motorcycle for many tens of thousands of kilometres. During assembly l used LOCKTITE on all threaded parts and not one has come loose.
I also use LOCKTITE on my fixed position antenna because l live at 8,000 feet and the wind can shake threaded components loose.
Only one component has failed on the discone antenna and that was one of the "rubber duckie" antennae, and l don't know what the specification is. The manufacturers didn't respond to text enquiries, despite several attempts.
Wow! Never seen one used on a motorbike before, we’ll done!
Bought one off Amazon works pretty well on the roof of my car picking up from miles away.
It isn't really a discone but rather a set of quaterwave whips with countereweight. The main design goal was probably to look cool.
Looks like a few consolidated J-poles
As an Rx only antenna one could possibly use it as QRP at less than 5watts. It would be worth a try. I have something along the same path that was made by Niljohn in the States some 20 years ago( they have been since acquired by a company that manufactures military multiband antennas) and it covers a wide range between 2meters all the way up to 800 MHz and can handle up to 50 watts. It consists of three "verticals" of different lengths set at 120° apart from each other and at about 30° off of the vertical axis. It is designed for mobile use although a bit crazy looking for the average ham antenna.
Subgunman, I too have the Niljon Classic. It's mounted on the bonnet of my Jeep. It provides very good low earth orbit FM repeater satellite coverage as well as good terrestrial operations from the mobile. I just acquired its big brother the Niljon Ultra which sports six "verticals" of varied lengths set 60 degrees apart and also 30 degrees off the vertical axis. I bought the home station version with the required groundplane elements. It has a nearly flat SWR from 88 MHz continuously through 6 GHz. I plan to use it on the various ham microwave bands in addition to the usual 2m, 133cm, 70cm, 33cm and 23cm bands. 73 de W6NOB
Picked this up fairly recently. I was pretty surprised at what I've been able to recieve so far. I'm near the cost and can pick marine traffic up at 40ish miles, plenty of air traffic from Ireland and England, even hams from Devon way (I'm from Wales). All that from using it indoors. I'd put it outside on a good day but wouldn't leave it out.
I'm from Wales just picked up the antenna hope it does the job 👍
@@rickets5094 Nice. Hope it works for you.
@@Axl_Pose didn't realize I needed a adapter for RTL SDR lol waiting on it now..
lol hopefully it comes soon and you'll be up and running in no time!
i have had mine on my balcony for about three years now, still works perfectly! 73, Levi in Sweden
Wonderful narration 💐👍
I have one of these Antennas. I was not happy with the coax so I changed it to RG mini XX all so wanted it longer but with out a join.to get to the in side plug it has to be warmed up ware the plastic fits in to the metal of the Antenna but remove the base and the top of the Antenna be careful when warming up the Antenna don't get to hot because the plastic tube will go floppy it would be easier if some heats it and another pulling it until it comes apart.i fitted 20-meters on mine RG mini 8 xx.when fitting the tube back in the metal Antenna gust use some Epoxy but only on the last 10mm of the tube.one thing if you got a watch on take it off because the magnet will kill your watch.i bought 15-inch of plastic tube because I wanted it a bit higher from the base.it won't ever go on a car because its would or mite come off.the RG 8 mini XX has made a difference .well worth doing.happy scanning
So disappointed..I cannot find any stock in the US or eBay or Amazon. Where can I buy one of these?
Don't suppose you know what that pulse is at 153Mhz below the POCSAG channel? It must be nationwide. I can hear it here in the midlands.
It's good old FLEX pagers. Easily decoded with multimon-ng.
Try this: rtl_fm -f 153.023M -s 22050 | multimon-ng -t raw -a FLEX -e -f alpha /dev/stdin
@@MI7DJT Thanks. Raspberry Pi script time. :-)
It's also POCSAG, and if left on with PDW running it decodes many medical messages too.
@@MI7DJT I've modified my POCSAG file to this 'nc -l -u localhost 7355 | sox -t raw -esigned-integer -b 16 -r 48000 - -esigned-integer -b 16 -r 22050 -t raw - | multimon-ng -t raw -a FLEX -e -f alpha /dev/stdin' and listen to UDP coming out of GQRX on the Pi. Works great. Thanks
I wish we had something similar available here in Australia. I would order one of these from the UK but I just looked online they are sold out everywhere...
Thanks for the video. Very informative. I went to your Amazon storefront to purchase it, but I only see the Tram 1410. Is the Skyscan Desktop still available?
Excellent, helpful video!
First time I picked up VOLMET is was a weak signal on a stock antenna I got with the SDR but had a mini heartattack assuming it was a numbers station
Great video, well done!
Interesting vid as I have the exact antenna, well I say antenna, I have the vertical antennas on the base but none of the radials and don't have the 4 wound radials at the base. I couldn't bring myself to bin it, I'd like to fabricate the radials plus the 4 small ones around the base, there lengths ...Great vid
Could you test it for resonant frequencies with a VNA? Might be useful for tx. Thanks
Funnily enough I did do this and then totally forgot to include in the video. I’ll reply again when I have uploaded the screen shot somewhere for you all to see.
can it receive iss sstv and noaa weather satellite?
If you can find a copy of Openear, especialy the one that didn't have tetra removed, it is waaaay better that dsd+, you can pinpoint transmissions with sdr sharp and get the mode automatically decoded but as far as the quality of decoded voice/audio goes, no match.
How would this perform please on Rx HF? Thanks.
Интересно. А какво КСВ има в обхват 144-146/430-440 Мегахерца?
drive.google.com/file/d/1sr6WLgS9Zyf5ZOf4L7Lu4VtV91a2x4ux/view?usp=sharing
@@TechMindsOfficial , Благодаря. Не видях детаилно в обхват 144/ 430 .
Comparing to the Diamond D130J which covers 25 to 1300MHz,this antenna has much shorter ground plane elements.I doubt if it can work well on frequencies lower than 100MHZ
I see you got the reflector set up, but haven't gotten ahold of anyone on it, seems empty whenever I check.
A discone if like awesome for SDRs.
Do you think this antenna could be used on 433mhz in a flat for TinyGS
thanks for this very informative on desktop antenna,I would like to get the screen frequency display you are using,can you advise me where to download it from and other use for it?thankyou.
My Flightaware is doing a cracking job at the moment, plenty of aircraft up there still, Everytime I look at least 30+. I'm guessing your coax was letting you down with that.
Do you think it’s suitable for outdoor installation?
Great. Thanks ✨🙏
so is this a receive only antenna , and can a person tx through it ? if so how many watts ?
It's not designed for TX, but you can view its VNA plot here: drive.google.com/file/d/1sr6WLgS9Zyf5ZOf4L7Lu4VtV91a2x4ux/view?usp=sharing
A friend have a MFJ discone and it TX ok on 144, 435 and even 1296Mhz, the gain is very low, but it can be done
Hello. First of all, thank you for giving RF such a nice antenna. For people living in underdeveloped countries like me, getting these antennas is nothing short of a dream. I live in Turkey and 50 pounds is about 950 Turkish liras. For this, can you share the dimensions of the antenna if it will not be kept as a trade secret?
Any chance you could test it with NOAA and Meteor M signal?
Often wonder what do folks actually use these for for listening to anything above 500MHz? Other than 1090 for ADSB is there much else to catch? I'd imagine if there is and its low power serious enthusiasts will be using something custom tuned for the job.
Hi Tech Minds.
Love your videos, I have been trying to purchase 2 x of these & have them shipped to Australia without success.
Just wondering if you are able to tell me who I might be able to purchase these through & have them shipped to Australia.
Thx in Advance.
Rgs
Wayne.
At the higher frequencies the coated glass (IR) will very much attenuate the signal.
Can you do a video on PDW install for windows 10
Sure :)
@@TechMindsOfficial you The man M8
Thank you
What's the cookie jar for (used outside)? I have bought the same antenna.
Can this be purchase here in the USA? or can you recommend one that is similar to this skyscan? Cheers!
Hi. I live ~13 miles from Heathrow and currently have a uniden EZI133XLT. I am considering buying this antenna to pick more traffic up coming in and out of Heathrow. Will it work from that range?
Nice review, want to get one now! Curious, that ham beacon you showed, what type of data was it sending?
JT65B
www.gb3vhf.co.uk/GB3VHFReceiving.html
@@TechMindsOfficial Thanks, nice article too!
What do you think about the Comtrack D-130 discone antenna?
Zero gain
So would you recommend this for a digital trunking p25 scanner? I’m trying to increase my receive on my RadioShack pro 197 scanner. I also understand that overloading the front end is possible but it’s still worth a shot
A use it for ma scanners bct15 x and whistler trx2e
And bct9
Wit SDR would u recommend for me plzzz
Can this be mounted outdoors?
Yep, sure can.
How do you get one in the U.S.
Can this antenna be permanently mounted outside?
I have few questions is this antenna good for weather sats? Please test this in tx...
That antenna -just looks wrong. No filters directing frequencies to matching whips. Would love a comparison of signal strength against a ‘normal’ dual band 2m/70cm whip
multiband dipole antennas like this are not omni directional. you might think on one band the rx is bad, but it could just be the antenna is turned the wrong way.
Hello! Is it good for TX? THANK YOU
Nope, unfortunately not. Some discones you get do actually work on 2/70, but not this one. Thanks for watching.
Great antenna, very cool. I would like to buy this antenna, to use in the SDR RECEIVER. but American imports are very expensive, the tax is very high, it is even more expensive than Antenna =( where can I buy a cheaper import fee? 🤔
Do you think this would work for a router on the helium network?. Thanks for the video.
Dude speaks in FM
It looks too small to do any good below 100mhz or so.
this is cool!!!!!!!!!
Hi ... thank you for your Amazing Video ... Please send me the Link for the Software you used on your PC for the Frequencies Test you did ... awaiting your Reply ... Thank You
SDRUNO is the software
Is it only for SDR?
You can use it on a physical radio too, for receive only.
Hi, a quick slightly off topic question, for ADS-B, is it better to monitor 1090Mhz or 978Mhz for tracking local aircraft?
Thank you in advance.
1090MHz :)
Looks good- can you transmit with 5 or 10 watts on ham bands with this?
Probably not, check this VNA scan: drive.google.com/file/d/1sr6WLgS9Zyf5ZOf4L7Lu4VtV91a2x4ux/view?usp=sharing
DESKTOP DISCONE makes me giggle ..wideband rf probe in a home enviroment ... .... get it high and outside with some lmr200/240
Exactly, but this antenna is marketed as a Desktop antenna. Which is why I also demonstrated using it outside. Unfortunately, not every one has the luxury of installing antennas outside.
@@TechMindsOfficial indeed :) and as per cool video .. maybe you could do a show about filters and tuners :)
I personally wouldn't see it as much as a desktop antenna as I would see it as a portable diskone antenna I can bring with me when I go somewhere
👍👍👍
tell them to toss some on US Amazon :)
Which is the maximum diameter of the antenna? Thank you!
Evaluating a supposedly broadband antenna without SWR checks? C'mon.
WIDEBAND DESKTOP ANTENNA
(Picture of rooftop antenna)
Dobra jest ta antena?
Can you transmit on this antenna?
Unfortunately it’s not resonant in any particular useful band. There are other discone antennas which are resonant on 2/70 for example.
👍👏👏
Soo many advertisements in such a short video saw me give up at third set of ads.
People still get ads on the internet? Adblock and Popup Blockers are a thing ;) Check out the addons / extensions for your browser.
The amount of adverts displayed is controlled by RUclips. Without the adverts I cannot put food on the table for my son and I. Thanks for watching and NOT blocking.
don't expect much from this antenna, have had it myself, nice for local traffic, but not really as good antennas for SDR or scanner receiver, and not for high freq, example 1090, it really won't work
I found this antenna to be very poor for the price and noticed I could receive signals without all the radials and whips attached and when attached the same signal was received with all the bits added there was no change in signal strength. No antenna in the world is capable of covering 25 to 2000mhz as it's totally impossible. I thought it was very poor for the price and found a slim jim cut for around 200mhz and a 3rd of the price massively out performed this discone.
Thanks for testing this, I've been undecided about getting this for a while now (I'm based in a very flat area not much above sea level). I think I might go for it.
Did you say you just connected it to a BNC coax wire when you had it in your garden? How many metres just out of interest? Thanks.
no HF test . sadly , But I likedthe tests thanks
Hi it’s Paul the software you used for 1090 on the left can you tell me what is it could. Thank you. Paul
Software available from www.rtl1090.com :-)
hello friend i watched your videos posted on your channel with great interest. It seems that you have a lot of knowledge on this program. If you could dedicate your precious time to us, you would be very happy. How can we contact you?
Looks like an all around winner. Is it just a scanner antenna? Can't you transmit with it as well?
I heard today that the U.K. was locked down, but I didn't know there was no air travel, right now! Hows that lock down working for everyone? Has the China-virus disappeared yet?
There is lots of air travel in the UK. Check ADSB Exchange.
China virus? That sounds like some conspiracy theorist.
@@sammiller6631
It was. Waky waky! 😂
@@PureAwareness76 Why would the OP want to transmit from a discone? It's no better than a stubby rubber duck antenna. They should "waky waky" their antenna knowledge.
Third comment!! I want to win this antenna
Discone = zero gain.
can't find u s a
Moonraker may post the US, drop them an email to find out.
Discone antennas are famous for....their lack of gain....
I'm as high as possible.
No Aircraft above the UK at the moment? Ha, Ha, Ha.... Pffft. There are always Aircraft above the UK. Jog On....
Covid times you 🛎️ end!
😂😂 get wrecked
I can't see any advantage at all in combining a very poor discone , 4 rubber duckies rather than a top disk of the usual 8 (or more) rods, with a few vertical elements. It's a complete shambles of a thing. Not sure where they plucked 25Mhz from, but it's a marketing ploy. Advertising gurus making silk purses from sows ears. Try a wire coat-hanger, straightened out, cut in the centre and connected to the same length of co-ax. Not joking.
4th comment :D
Lololol.That's a stupid gimmick antenna. Throwing a random length of wire on the floor is equally as good as that thing.