Garage Door wire Fix EASY!

Hi guys! if you find this video useful you can help me by donating , it don’t matter if it’s a small amount. Anything counts , link down below Thanks ^_^
www.paypal.me/...
---------------------------------------------------------------------------------------------------------------
Garage Door Cable Fix EASY!
hi guys on this video I will show you how to put back together the cable for the garage door
I hope this video helped you. ,
if it did please like comment and subscriber
for business enquires please email me at
[e-mail]

[@billydrake8600]

Thank you for this video. I got it fixed thanks to this video.

[@carolynbrowning8014]

Just fixed my garage door cable thanks to your video. You rock!!!

[@mnmurph]

"Pressing pliers" = vice grip pliers

[@Nikolak44_AJ_Epic]

why are they loose to begin with. Why did they come off? What is the root of the problem?

[@garrettmatsumoto1233]

Great to the point video! I was about to give up and watched your video! Job completed! Thank you

[@redrider8036]

Thanks for the tip! Worked like a charm!

[@williammusgraves2852]

Didn’t need to disconnect cable just loosen set bolts 3/8 socket and turn the drum and retighten much easier

[@f1lupo]

did you unplug the motor first before you opened the door?

[@jamesng9831]

I see the cable reel can be turned easily. Did you loose the spring?

[@Lin-id9qc]

Thanks..my cable came off too but the loop on the end split rusted so I'm guessing I need a whole new wire? I also have a garage door opener on the door. I hate to call a repairman they will charge me alot to fix this when maybe I can.

[@liviO13]

I’m sure you can fix it!
The best thing you can do is replace it, you don’t want the door falling on anyone because of a rusted wire that you already knew about. They’re inexpensive too.
Good luck! If you haven’t already fixed it 👌

[@s3hooligan]

I tried doing this but for some reason, the cable still keeps coming off. It seems like there’s not enough tension on the cable and it keeps coming off on both sides when I raise the door after lowering.

[@newmiester]

Set cables first with the door in the closed position and the add the tension. When the door is open there should still be about a half turn on the springs.

[@newmiester]

7 foot high door with residential drums the rule is one full rotation of the spring per foot of door height. Most doors being 7' high require 7.5 turns. Or 30 quarters. One plug hole on the spring is a quarter turn.

[@s3hooligan]

newmiester it turned out that my door had an internal spring that was broken. I ended up needing to replace the assembly

[@kenrodz3858]

Awesome video, thank you for showing us !

[@manuelm.2692]

Nice job bro ,thanks for share, god bless you

[@eihcranedlaw2642]

I watched about 5 video fir this issue, yours was the easiest and fastest.

[@unmercifulbunny2500]

really nice video

[@562rican09]

Thanks..very helpful and simple

[@yayas6887]

Thanks very helpful tips

[@fatzz9149]

I did exactly what you did, but when I opened the door back up the rod where the cable is connected isn’t spinning the cable back up please help😩

[@tobytollefsen8802]

Well done. Thank you.

[@fredhogans]

Thanks for the tip

[@beebrizzle792]

Thanks bro bro

[@elchilango211]

It just happened to me 🤦🏻‍♂️ so after you roll the cables back you don’t have to re adjust the springs? Thanks

[@daddybear7062]

28yr garage door technician, I would hire you today!

[@imsurebrat4580]

I did it thanks to your help. Appreciate it

[@8Jallin]

thank you.
Corona o modelo?
o te aguitas

[@sharonlanders8130]

Thank you so much excellent illustration!

[@s3hooligan]

Thanks for posting. I’m going to use this information to fix my cables.

[@dominator146]

No room in my garage

[@CarlosGarcia-rs8fd]

Thanks great

[@fahadabdul4678]

Thanks

[@romanescalera7752]

Can you explain why they comes off.

[@tonyl1984]

Could happen if you bring the door down on top of something one side for example & the weight is off that side & the cable becomes slack

[@dopenough2smoke]

Springs could be losing tension. You need to have a professional come look at it.

[@natalieamberger2432]

Thank you!

[@alexromano5914]

Thanks mate my sister was about to pay $300 to get it done and I used this video to fix it. Cheers mate

[@FixitFelix529]

I am happy to help 😊

[@alphagrizzly]

You need new springs. That’s the correct fix. Since you didn’t replace them you will have this issue again. Fixing it and fixing it correctly are two different things. Also your door is crooked. You can clearly see it when the door goes up. Please don’t try to give bad info this is not a job anyone should do unless they are trained

[@FixitFelix529]

Well it’s been 9 months since this fix and my garage door is still working perfectly fine.

[@dougc190]

Looks like you did a good job to me. Hrach you make a video and show us how it's done